|
|
|
|
|
|
Proximity switches with background suppression FT 20 RLH-PSM4
Scanning distance adjustable from 20 to 60 mm
Laser red light 650 nm
Detection of ultra small parts
Laser protection class 1
Contamination indicator
Teach-in/key lock by push of a button/control line
N.O./N.C. selectable
Also available with 3-pin connector
Switching frequency: 1000 Hz
Different object colours and surfaces can heavily effect the detection behaviour of an energetic switch. With purely energetic evaluation, it is, for example, not possible to detect a black object in front of a white background.The white background reflects more light than the object itself.
In order to deal with such applications reliably, the background suppression procedure was developed. In this procedure, both the light reflected by the background and by the object is evaluated.The light is captured by two different receiver elements. With this procedure, it is possible to reliably detect e.g. a dark object on a light color conveyor belt.
There are two different procedures for the physical realisation of background suppression. In general, a distinction is made between a fixed and adjustable background suppression. With a fixed background suppression, the transmitter and receiver elements are rigidly mounted.
The laser units are particularly suitable for the detection of very small objects. With larger objects, a red-light or infrared sensor should be used. Only the background suppression procedure enables the detection of a dark object on a light conveyor belt.
|
|
|
The Bently NevadaTM 3300 XL 50mm transducer system is a highly robust and reliable proximity probe system. It offers greater moisture resistance and a broader temperature range than older systems, without compromising the linearity and accuracy required by demanding applications such as DE.
|
|
|
|
|
|
In various detecting devices with Bestact incorporated. and to mainlain high operation accuracy for a long period of time, sufficient investigation and consideration has been applied to the maierial sélection and design of the contact energizing magnet.
Permanent magnets used for Yaskawa's detecting devices are rare earth magnet and anisotropic ferrite magnet which are characterized by high coercive force and large energy product, thus optimum design has been achieved. Featuring excellent stable performance without demagneti-zation due to fluctuation in temperature.
Demagnetization due to aging is 2% or less tor a 10 year period.
Those magnet proximity sensors are typically used in : steel plant machinery and equipment (for raw material handling, iron making, rolling milIs), plating line, large-size material handling ma-chines, automobile manufacturing lines, elevators, cement and related equipment, power station facilities, dam equipment. pollution prevention equipment and devices. mine machinery, Chem-ical industry machinery and equipment. marine product processing machines.
|
|
|
Position and movement detection is indispensable in the automation industry. Non-contact proximity switches allow for a significantly higher number of switch operations than mechanically operated switching elements. The different elobau variants usually use reed technology and are operated with magnets. Steel proximity switches and vane switches are the exception as they are operated by a ferrous metal.
|
|
MOD I930-P930 Position sensors
Fixing: I930 M8x1,25 / P930 diametro 5,6
Capacity contact: 0,5 A / 50 V
Output signal: N.O.
MOD P900 P915 P920 Position sensors
Capacity contact: 0,5 A / 50 V
Output signal: N.O.
MOD SNLVDT Position sensors
MOD SNM01 Position sensors
MOD SNM02 Position sensors
Use: Sensore di posizione cavalletto ad effetto di Hall
Capacity contact: Vcc 8 - 18 Vdc Icc 20 mA
Output signal: Iout max 3A Rout max 0,2 ohm
|
|
PSEN sensor technology, Safety for man and machine
Safety switches ... for safety gate and position monitoring :
Hazardous machine movements must be stopped when a guard is opened. It must not be possible to either defeat or manipulate these guards. PSEN safety switches meet this requirement and are therefore suitable for monitoring gates in safety fences for safety zones, for example.
Safety bolt ... for safety gates in a rugged everyday industrial environment :
For safety gates that are difficult to adjust or in areas where safety gates are often opened and closed, protection must be provided against defeat and manipulation, but a long material service life must also be guaranteed. PSENbolt provides a complete solution, comprising safety switch, handle and bolt.
Safe camera systems : to monitor two-dimensional (2D) or three-dimensional (3D) zones.
|
|
|
|
|
|
BNS range magnetic safety sensors serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor of the AES / AZR range for protection up to Control Category 4 to EN 954-1, see chapter 10.2.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Schmersal make both standard and AS-i Safety at Work magnetic safety sensors.
Click here to see the AS-i models Or for the standard models click below
|
|
|
Ultrasonic distance sensors are working contactless and can still detect small objects (e.g. wire Æ 1 mm) at considerable distances. They are able to disregard disturbing backgrounds and functions in fog, dust , dirt or extreme lighting is possible. No correction factors have to be applied and colour does not matter.
|
|
|
Honeywell Sensing and Control ultrasonic distance sensors solve tough position sensing problems, detecting targets made of practically any material. They work in dry, dusty environments. Particularly useful where other sensing technologies have difficulty, such as: clear or shiny objects, foggy or particle laden air, splashing liquids, etc. Also where larger sensors or longer sensing distances are required.
|
|
Ultrasonic sensor UT 20-240-AIM4
Range to 240 mm
analogue
teach-in
4 ... 20 mA
plug M8 4 pins
product data
|
|
|
Ultrasonic sensors use ultrasonic waves for non-contact and wear-free detection of a large variety of objects. It does not matter whether the object is transparent or opaque, metallic or non-metallic, or of liquid, solid or powdery consistence. Environmental conditions such as spray, dust or rain hardly affect their function.
|
|
Design Features
* Adjustable with XY axis using the PM101/102 magnets
* Cable wiring from the Left of the package
* Repeatablity of operation
* Shunt or direct magnet operation
* Multiple Mode of Operation
Product Comments
* Robust Nylon Housing
* Normally Open
* Surface Mounted by fixing screws
* Fully encapsulated
* Matching Package Operating Magnet PM101 or PM102
|
|
Honeywell environment sealed proximity sensors use a variety of technologies, including Eddy Current Killed Oscillator (ECKO) and Hall-effect, which are used to detect metallic objects passing in front of the sensing face. Once a target metal is detected, a trigger signal is produced and passed through the output conditioning circuitry to give an output that can be configured according to the sensor's application. These rugged, one or two-piece products meet demanding requirements such as temperature, vibration, shock and EMI/EMP interference. They are available in a variety of housing materials and termination styles, and meet military standards.
Best Used For:
Harsh environments such as aerospace, ordnance and marine applications.
|
|
OA-6000
Long range detection area
OPTEX OA-6000 provides a long range detection area even from high mounting position.
High mounting position
with sufficient sensitivity
Stable detection performance at high mounted position.
Stable operation
OPTEX OA-6000 will not activate shutters by too much of a wide detection area.
Flexibility
Detection area can be adjusted 160º vertically and 360º horizontally.
|
|
|
|
|
|
The RPS-401A-80P analog ultrasonic sensor is mounted in a PVC barrel housing and is completely self contained. It is powered by 20-30 VDC and is reverse polarity protected. It also has a narrow beam angle which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected. The RPS-401A-80P has 2 short circuit protected analog outputs, 4-20mA and 0-10 VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero (P1) and span control (P2). The (P1) potentiometer must be adjusted first. Both analog outputs can be used at the same time.
For set-up purposes an LED strength indicator is provided. This LED is Green when not detecting and changes to a bright Red as a target moves into place depending on how much reflected signal is coming back from the target. The frequency of operation for the RPS-401A-80P is 140kHz. The RPS-401A-80P is constructed of PVC. The barrel measures 30mm x 105mm. A standard 6' cable is provided.
|
|
Analog Sensor
Technological applications: monitoring of positioning, movement, deformation (detectors with analog output signal).
|
|
These are electronic transducers which provide an output signal
when any type of material (Wood, metal plastic, granular and
powder product) comes into their sensing area without coming
into contact.
-Cylindrical series 18 - 30 - 40 mm dia.
-Totally screened and partially screened version
-Adjustable sensing distance
-Amplified 4 wire types NPN or PNP, NO+NC from
10 ÷ 55 Vdc
-Amplified 2 wire types from 20 ÷ 250 Vac/dc
-Relay output type with 1 pole changeover 1A ÷ 220 Vac
-Supply voltage 18 ÷ 50 Vdc / 18 ÷ 240 Vac
-Led incorporated
-Short circuit protection for D.C. and A.C. versions
-Maximum output current D.C. 200 mA, AC. 300 mA
-Types with connector output
-Types with instantaneous intervention or timing up to 15 min
-Protection housing in HOSTAFORM if used as level control
|
|
|
Detector of position for the good and bad material detection conducting of electricity. adjustable the nominal range of the detector is let regulate by means of a potentiometer. The detectors high temperature the detectors resisting the high temperatures normally consist of a head of detection planned for the high temperatures and of a separate electronic module. They are connected together by a cable with Teflon sheath. Favour: detection until 200° turnover
|
|
The SC200 capacitive point level switch is an excellent solution for applications with space limitations. It senses virtually any type of medium and also performs well when coating or product build-up becomes a concern. The unit features an LED for switch point status as well as a potentiometer to adjust the sensitivity of the unit.
SPECIFICATIONS
SC200
Operating Voltage: 12...30Vdc
Current Consumption: 3mA
Adjustment Potentiometer switch point
Output: PNP (3 wire)
Operating Temperature: 14 to 176ºF
RL202: Controller for AC Power Supply
Operating Voltage: 115 or 230Vac (50/60Hz)
Output: 1 SPDT (5A - 250Vac)
Operating Temperature: 14 to 140ºF
|
|
capacitive sensors
- starting at size M12
- plug or cable connection
- normally open, normally closed output
- stainless steel, brass-, plastic housings
- short circuit protection/reverse battery protection/overload protection
- special designs on request
|
|
Features:
- Available in flush mountable body style
- Nickel plated housing with IP67 and IP69 protection rating
- Sensing distance of 2 mm (0.078” to 15 mm (0.591”)
Capacitive proximity sensors are ideal for sensing non-metal objects or for level control of fluids and granular material.
Adjustment can be used to zero out the presence of an object allowing the sensor to sense "through" a bulk material or liquid level.
The operating distance of a capacitive sensor is related to the dielectric constant (εr) of the object material to be detected. The higher the value of εr, the easier the detection of the object will be. The object to be detected through must have a lower εr value.
The threshold level is adjustable via a 20-turn potentiometer located at the rear of the sensor
|
|
|
Warner Electric has many years of experience in applying sensors and switches in motion control applications. Our broad range of innovative and technologically advanced products offers our customers the exact solution to satisfy their sensing applications needs.
|
|
general data mounting type shielded
nominal sensing distance Sn 4 mm
nominal sensing distance Sn adjustable 0,5 ... 4 mm
temperature drift ± 15% (+10 ... +70 °C)
sensitivity adjustment Pot, 270°
output indicator LED yellow
electrical data voltage supply range +Vs 10 ... 30 VDC
current consumption max. 20 mA
output current < 200 mA
voltage drop Vd < 1,5 VDC
switching frequency < 50 Hz
short circuit protection yes
reverse polarity protection yes
mechanical data type cylindrical
housing material PBT
dimension 12 mm
housing length 60 mm
connection types cable
ambient conditions operating temperature -25 ... +75 °C
protection class IP 65
|
|
Level and feed monitoring - that is one of the attributes of capacitive sensors. Irrespective of whether it involves a solid material such as paper or wood, granules or liquids. They reliably detect the status of the product in the production process and during final inspection.
Capacitive sensors supplied by SICK are always convenient to use. Sensing ranges between 1 and 25 mm allow clearance in almost any installation situation and they are extremely adaptable for a wide range of applications.
Thereby these sensors are suitable for extremely adverse industrial environments. Impurities and contamination, dust and airborne spray particles have little effect upon them as does electro-magnetic interference. No wonder that they are installed in the most diverse branches of industry. In the food industry, car industry or in storage and conveying technology.
|
|
World's First Datum Algorithm
• Stable Detection of Metal Targets
• Stable Detection of Black Targets (Rubber)
• Ultra-Long Range up to 1m (39.37")
• Tough, Rugged: IP-67 Enclosure Rating
The NEW GV Series Digital CMOS Laser Sensor provides unmatched performance, even on metal and black (rubber) targets. Multiple models available to meet all your laser sensing needs.
|
|
|
You can detect distances or other dimensions such as filling levels or positions precisely using SICK distance sensors. Our products stand for the highest degree of measurement accuracy at small and great distances and ensure smooth production processes. In doing this, our photoelectric distance sensors use the specific advantages of measuring with light.
|
|
The RPS-326 is a low frequency, sealed transducer sensor best suited for applications where harsh or hazardous environments are a problem. The transducer head is constructed of 316 grade stainless steel and has a CSA explosion-proof rating. The RPS-326 sensor head CSA rating is Class 1, Division 1, Group ABCD. The ranging and proximity modes provide the versatility of simple detection, or actual distance measuring.
The isolated form C relay furnishes N.O. and N.C. outputs, and with the addition of the RPS-500 card various analog outputs are supplied. The RPS-326 sensor, which operates at a frequency of 37kHz, has a narrow sensing beam. Sensing ranges available for the RPS-326 include 24" to 72", and 24" to 240". Mounting flanges, LED indicator, ranging potentiometer and 30ft. transducer cable are included. Optional cable lengths are available.
|
|
|
|
|
|
Features:
Narrow, 7° sonic beam
High resolution 500 KHz ultrasonic frequency
Fast response - as fast as 1.5 ms sampling rate
Self-contained, 18mm barrel or flat-profile housing styles
Field programmable capability in 18 mm and flat-profile models
DeviceNet capability available in flat-profile models
CE Certified
When short-range sensing applications demand repeatable and reliable On/Off control performance, the high-frequency, fixed-window SUPERPROX® Model SM600 Series ultrasonic proximity sensors are the ideal solution. These noncontact, self-contained sensors are unmatched for the reliable detection of objects of all kinds, transparent or opaque, liquid or solid, and as small as 1.6 mm (0.06") rod diameter, regardless of color or shape. Offering a variety of sensing ranges, up to 305 mm (12"), and fixed sensing windows, this series provides for the convenient placement of SM600 sensors throughout the plant.
Given the capability to “back off” from formerly “nearly-touching” mounting positions, these sensors are the solution for such applications as: metal parts as close as 25 mm (1"), moving back-to-back at speeds in excess of 2000 per minute. Others include: cap presence and/or tilt detection, fill-level checking, fill-tube-presence monitoring, downed container detection, case inspection, detection of container edges, web monitoring and CD case inspection where opacity, color and height vary, and wherever there’s a need to upgrade a metal prox function.
|
|
Hall-Effect Position Sensor W/ Linear Output Voltage (HL)
Non- contact magnetic sensors that are designed to respond to a wide range of positive or negative magnetic fields and can sense relatively small changes in a magnetic field. By having magnet as a target, this unit produces a Ratio-metric Rail-To-Rail linear output. It also has an internal amplifier to boost the output to a higher level. These sensors are ideal for applications such as magnetic flux measurement, displacement, and linear output rotary measurement.
|
|
|
|
|
|
Description:
These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a band gap voltage regulator to allow operation with a wide range of supply voltages. These devices feature logic level output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over 200 kHz. The Uni-Polar turns on with a (logic level “0”) after a sufficient magnetic field from the south pole of a magnet approached the symbolized face of the device (Operating Point) and turns off (logic level “1”) after the magnetic field reached a minimum value. The Bi-Polar latch device turns on (logic level “0”) in the presence of a magnetic south pole and turn off (logic level “1”) when subjected to a magnetic north pole. Both magnetic poles are necessary for operation for Bi-Polar devices. This feature makes these sensors ideal for applications in noncontact switching operations, brushless DC motors and for use with multiple pole magnets.
Features:
- Designed for non-contact switching operations
- Operates over broad range of supply voltages (4.5 V to 24 V)
- Operates with excellent temperature stability in harsh environments
- Drive capability up to 7 TTL loads
|
|
|
|
