|
|
Half-threaded M12x1 Hall Effect sensor Uninflammable nylon glass body sensor
Threaded M12x1 Hall Effect sensor Uninflammable nylon glass body sensor
Cylindrical Hall-Effect sensor diam. 8 Uninflammable nylon glass body sensor
|
|
|
|
|
|
The RPS-400-6 is a compact, high frequency sensor. It was introduced to the Migatron family of ultrasonic sensors to better meet the needs of the machine manufacturing industry.
This sensor has a wide array of application solutions not found in other proximity sensor technologies. The RPS-400-6 has an adjustable two to six inch sensing range with background suppression (meaning any object within the desired range is detected, while objects out of the desired range are ignored).
It cannot be affected by changes in target color or material. The RPS-400-6 is capable of detecting vibrating and/or tilting targets. A response time of no more than 2.1 ms and an operating frequency of 300 kHz makes the RPS-400-6 a repeatable and accurate high speed sensor.
The RPS-400-6 is a three wire NPN transistor output device. The transistor can switch 30VDC at 50 mA continuously. A six-foot cable comes standard with the RPS-400-6. Special cable lengths or connectors are also available for OEM applications.
.
|
|
The RPS-412A is a high accuracy analog ultrasonic sensor (+/- 0.002" or 0.05% of range, whichever is greater, at 25 degree C). The sensor has a built in temperature compensation target, that monitors and compensates for air temperature 50 times per second. The sensor also compensates for changes in relative humidity, changes in barometric pressure, and other factors that influence the speed of sound.
The RPS-412A has a 47mm stainless steel barrel housing. The stainless steel housing is electrically isolated from the sensor electronics.
The RPS-412A has a 0-10V analog output. Two measuring ranges are available: 3-10" and 3-16".
|
|
|
|
|
|
They should be considered as part of the traditional range of
sensors with the difference that electronic portion is
completely separate from the sensing part which is
in the form of an extension which can withstand temperature
from -200 ÷ +250 °C.
These products are used to control the levels of hot
materials such as liquids, oil, powder and plastic granules.
They also sense solid metallic and non-metallic bodies positioned
in areas of high temperature. ALSC Amplifier in plastic housing
with UNDECAL PLUG
-Supply voltage: 24Vac or 110/220 Vac
-ALSC-1 CH type suitable for one sensor
-ALSC-2CH type suitable for two sensors
-Led incorporated
-Sensitivity adjustment
-Relay output changeover 5A to 220 Vac
Sensors for high temperature: stainless steel housing
M18 and M30, sensitive side PTFE
-Provided with connector for connection to the amplifier
-cable length: 2 or 5 metres
-min./max. working temperature from -200 ÷ +250 C
-sensing distance: 5 mm for type SC18M-HT and 15 mm for
type SC30M-HT
-degree of protection: IP68
|
|
These are electronic transducers which produce an output signal
when a metallic object (steel, aluminium, copper, brass etc)
enters into their sensing area from any direction without coming
into contact.
-Cylindrical series 4-5-6.5-8-12-14-18-30 mm.
-Rectangular series dim:
8x8x40 - 10x16x28 - 12x26x40 - 17x17x30
-40x40x113 - 80x80x50 mm.
-Sensing distances from 1 ÷ 50 mm.
-NAMUR types from 5 ÷ 24 Vdc
-NAMUR EX types
-Amplified 2 wire types from 10 ÷ 30 Vdc.
-Amplified 3 and 4 wire
types NPN or PNP from 10 ÷ 30 Vdc.
-Amplified 2 wire types 20 ÷ 250 Vdc.
-Led incorporated
-Short circuit protection for amplified types.
-max. output current for D.C. 200mA for AC. 300 mA
-All types are available with cable or plug for connector.
|
|
The portfolio of the inductive sensors of Leuze electronics contains most different designs and switching gaps and covers thus many application possibilities. In compact execution the Leuze sensors can be integrated easily when assembling, handling or robotics applications.
The requirements after large ranges, as for instance in the promotion and storage engineering the variants with up to 40 become millimeters switching gap fairly.
Full metal remarks to M30 offer mechanical protection in metal or woodworking machines. Against cleaning agents steady high-grade steel variants in V4A with enclosure IP69K as well as ECOLAB certificate fulfill the requirements of the food processing, - filling, - packing or pharmaceutical industry.
|
|
Inductive sensors
Capacitive sensors
Photoelectric sensors
Tilt sensor
Photoelectric safety devices
Coded magnetic switches / Safety transponder system
Safety magnetic controller
Magnetic switches
Float switches
Sensors for potentially explosive atmospheres
|
|
|
Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.
|
|
inductive sensors
- starting at Ø 3mm
- DC-, Namur- and AC-versions
- plug or cable connection
- normally open, normally closed, antivalent output
- 2-, 3- und 4-wire technology
- stainless steel, brass-, plastic housings
- short circuit protection/reverse battery protection/overload protection
- pressure resistant sensors up to 300 bar
- special designs on request
|
|
Osiprox XS6 Auto-adaptable 12 mm Barrel Inductive Sensor
Features:
Auto-Adaptable Capability
Self-contained, 12 mm housing style
Sensing Range up to 9 mm (.35")
UL Approved
CE Approved
|
|
|
Warner Electric has many years of experience in applying sensors and switches in motion control applications. Our broad range of innovative and technologically advanced products offers our customers the exact solution to satisfy their sensing applications needs.
|
|
general data mounting type shielded
special type with banking screw
nominal sensing distance Sn 0,4 mm
hysteresis 3 ... 20 % of Sr
output indicator 4 port LED red
electrical data switching frequency < 5 kHz
voltage supply range +Vs 10 ... 30 VDC
current consumption max. 18 mA
voltage drop Vd < 2,5 VDC
output current < 100 mA
short circuit protection yes
reverse polarity protection yes
mechanical data type cylindrical threaded
material (sensing face) PBT
housing material steel / hardened steel
dimension 8 mm
housing length 56 mm
connection types connector M8
ambient conditions operating temperature -25 ... +75 °C
protection class IP 67
|
|
|
|
|
|
Features
Introducing the newest member of the rectangular proximity sensor line, the GX-F/H series. This exciting new series offers an unprecidented level of stability, durability, and workability. Using advanced manufacturing techniques, SUNX is able to create sensors that are minimize part to part variance and offer a detection distance that only varies by a maximum of 0.4mm! The result is an incredibly stable detection that is suitable for usage in high volume applications where precision from installation to installation is imperative.
The environmental characteristics of the GX-F/H series further solidify its high-end performance, easily surpassing conventional products. The IP68g enclosure completely isolates the sensor from the effects of dirt, water, or oil allowing usage in very harsh environments. The series also exhibits an extrememly tight deviation of sensing characteristics, +/-8%, over its usable temperature range of -25 to +70 degrees C. Add in a 10X increase in vibration in shock resistance over our previous models and you are left with the most durable proximity sensor SUNX has created to date. Lastly, SUNX has added a metal sleeve in the mounting hole to increase tightening strength, and doubled the wiring gauge to make workability far easier then our previous models. Installation has never been easier. Download the full product catalog for more information or contact us today!
|
|
There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating life and extreme robustness. The sensors from SICK provide optimum precision and reliability using the most modern ASIC technology.
SICK can always provide the right solution to meet your requirements - from cylindrical and rectangular standard sensors with one, two or three set switching distances to special sensors for Ex-zone applications and harsh environments. It is the intelligent, reliable route to implementing industry-specific and customized solutions to any task involving automation.
|
|
|
The industry standard inductive sensors provide the highest reliability for machine part and metal object detection from short to long distance detection, in special environments, for special mounting conditions, special applications or special connectivity requirements.
|
|
|
|
|
|
High Stability Inductive Proximity Sensor
Introducing the newest member of the rectangular proximity sensor line, the GX-F/H series. This exciting new series offers an unprecidented level of stability, durability, and workability. Using advanced manufacturing techniques, SUNX is able to create sensors that are minimize part to part variance and offer a detection distance that only varies by a maximum of 0.4mm! The result is an incredibly stable detection that is suitable for usage in high volume applications where precision from installation to installation is imperative.
The environmental characteristics of the GX-F/H series further solidify its high-end performance, easily surpassing conventional products. The IP68g enclosure completely isolates the sensor from the effects of dirt, water, or oil allowing usage in very harsh environments. The series also exhibits an extrememly tight deviation of sensing characteristics, +/-8%, over its usable temperature range of -25 to +70 degrees C. Add in a 10X increase in vibration in shock resistance over our previous models and you are left with the most durable proximity sensor SUNX has created to date. Lastly, SUNX has added a metal sleeve in the mounting hole to increase tightening strength, and doubled the wiring gauge to make workability far easier then our previous models. Installation has never been easier. Download the full product catalog for more information or contact us today!
|
|
These are sensors which have their sensing area formed in a ring
and sensing occurs when a metallic mass enters this ring. They are
particularly suitable for sensing, counting and checking small metal
parts: screws, nuts washers etc. or for similar applications.
-They are supplied with internal diameter
5-12-15-22-25-30- 44-63-100 mm.
-NAMUR types from 5 ÷ 24 Vdc
-NAMUR EX types
-Amplified 3 and 4 wire types NPN or PNP from 10 ÷ 30 Vdc
SIA25 totally screened against mutual interference
-Led incorporated
-Max. output current 200 mA
-Types with retained impulse 100 ms
All types are available with cable or plug for connector
|
|
APPLICATIONS
• Water-based product market
1) Automatic lighting of wash basin units
2) Toilets
3) Automatic water flow from faucets
• Stores and financial instructions
1) Automatic doors
2) Automatic lighting
3) Cash dispensing machines
4) Automatic teller machines
5) Visitor detecting sensors
• Amusement market Automatic lighting for game display
• Medical field
Non-contact switch
• Others
1) Automatic ticket gates
2) Seat-taking sensors
3) Golf cart collision prevention
|
|
|
|
|
|
The RPS-409A-IS is an intrinsically safe, UL Listed analog ultrasonic sensor. It is a self-contained sensor in a 30mm PVC barrel housing. It is powered by 16-30VDC with reverse polarity protection. It also has a narrow beam angle, which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected.
The RPS-409A-IS has a short circuit protected analog 0-10VDC output. Example using the RPS-409A-80-IS: The output is a linear .125 volts per inch.
The RPS-409A-IS has built in temperature compensation to provide accurate readings throughout the entire operating temperature range.
An LED indicator is provided. The LED is green when not detecting and changes to red when a target moves into place. The sensor is completely sealed and the connection is made by way of IP and NEMA rated cables.
There are four sensing ranges available: 4-40", 6-80", 10-144", and 12-216".
The RPS-409A-IS is designed to take advantage of today's PLC and computer analog input cards. The numerical values that are programmed into the PLC or computer will determine the zero and span.
|
|
ODS Blue-line sensors is the price leader in high performance non-contact measuring.
The ODS Blue-line sensors is a very price competitive series of high quality optical laser sensors, especially designed to meet demands from machine builders worldwide. The result is unsurpassed value for money, based on a simple mechanical layout, but at the same time living up to the well known high ODS-standards of measuring accuracy and rugged durability.
The applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to everywhere a non-contact precision measurement is advantageous.
The ODS Blue-line is a good example of DSE’s efforts in customization. In addition to the competitive program of ODS sensors and O2DS scanners, DSE design and manufacture special sensors to customer defined specifications.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
Measuring sensors
Measuring optosensory technology offers an unusual performance spectrum. Depending on the field of application, modern optosensors make use of different measurement principles such as triangulation, phase shift or pulse propagation time to measure distances. Measurement takes place either directly to an object or to a reflector. Leuze electronic also offers positioning systems which determine positions using a barcode tape.
|
|
|
|
|
|
HL-C1 sensors
The laser displacement sensor HL-C1 has reached the highest level in its class. Even when sensing difficult objects such as black rubber or very shiny objects, the sensor has no problems maintaining stable and consistent results. Through the fusion of our unique newly developed optical system, linear image sensor methodology and high-speed sampling technology, a wide variety of objects can now be stably measured with great precision at ultra high speeds. This new sensor is developed for use in almost all fields of industry like tyre manufacturing or semiconductor production (wafers, printed circuit boards).
HL-C1 controller
The compact and multifunctional controller unit HL-C1CM again shows how powerful this new sensor series is. A flexible combination of controller and sensor heads allows cost-effective service and maintenance. Even in production changeovers, i.e. when the distance to be measured changes, only the head has to be exchanged. Another industry first is a compact touch panel that allows you to conveniently make settings and display data. Up to two sensor heads can communicate with one controller. Together with the touch panel, results can be calculated, e.g. for thickness or difference measurement. Moreover, all adjustments and results can be transmitted via RS232 to a normal PC.
|
|
|
|
|
|
If you will measure distances, profiles, form, surface, thickness online fast, non contactless and with a high precision, Eltrotec sensors offers a wide range of laser measure sensors for industrial process measurement.
More than 20 years experience quarantees the knowledge for a lot of different applications customers had to do every day (All the laser beam has protection class 2).
Several sensor types are available to solve specific problems as there are:
a.) shiny or glossy surfaces
b.) black, blank rubber and dark surfaces
c.) surfaces in variation of black and white (colours)
d.) hot metals where you need bigger distances and high temp. sensor.
e.) distance measuring where the machine creates vibration, shock or magnetic fields
range: 5, 10, 20, 50, 100, 200 mm (250 mm is shock protected)
resolution: 0,5 µm - 40 µm
interface: 4-20mA / 1-5VDC
RS232 included
princip: CCD-Chip with integrated signal prozessor
frequency: 1000Hz
(best results with this sensor if there are fast changing interfaces in reflection of surface)
Spot diameter: typ. 100-200 µm depends on distance
|
|
The RACO path-sensory system has been specially designed for exactly positioning and switching off electro-magnetic actuators in the final position. Not only is the position ascertained unconventionally by electro-magnetic means (e.g., gear-shifting mechanism) while doing so but it will also be determined via a close-coupled magnetic field without any movement.
The EPS consists of a printed circuit board and a magnetic holder with the magnet. The electronic positioning sensor (EPS) is integrated into the device%u2019s supplementary casing (A) on the motor shaft's end of the servo-motor or in the device's supplementary box (D) on the coupling casing. The installation, commissioning (starting up), maintenance (servicing) and upgrading is simplified in comparison with a conventional design that has mechanical limit switches and a shift transmission which must be adjusted individually.
|
|
Magnetic Reed Switches
Magnetic reed switches are available on nearly all air cylinders offered with Ultramation Linear Thrusters. Reed switches are actuated by the close proximity of a magnet which is included within the cylinder as part of the piston assembly. A reed switch contains a normally open sealed reed that closes or makes in the presence of a magnetic field. The reed switch returns to the normally open state once the magnetic field is removed. Reed switches, both with and without LED position indicators, are used in the vast majority of applications where the magnetic piston briefly comes to rest at each end of the stroke.
|
|
MZCK 03
general data
type magneto-resistive
version C-slots
nominal operation point 28 Gauss
electrical data
switching frequency < 200 kHz
response time / release time < 0,0025 ms
output current < 200 mA
voltage supply range +Vs 5 ... 30 VDC
mechanical data
cable output lateral
depth 9 mm
width / diameter 3,7 mm
mbient conditions
operating temperature -10 ... 70 °C
|
|
One sensor, two adjustable switching points
Saves space, time and money
Simple alignment and definition of the switching point thanks to teach process
Easy mounting with only half the cabling work
Sensor sunk into the T-slot thanks to compact design
Applications: end position query to short hoist cylinders or intermediate position detection, e.g., for reducing piston speed
|
|
General description :
Industrial-grade, Hall effect geartooth speed sensor with adjustable stainless steel housing.
- Sense Motion of Ferrous Geartooth Targets
- Near-Zero Speed Sensing Capability
- Immune from Hostile Environments
- Not Subject to Rotational Orientation
- High-Speed Capability
- Sinking (Open Collector) Output
- Reverse Battery Protection to -24Vdc
- Wide Operating and Storage Temperature Range
- M12 Integral Connector Meets IEC60947 - 5 - 2
- Meet all IEC (International Electrotechnical Commission) Requirements for Heavy Industrial Environments, Assuring Immunity from:
* Electrostatic Discharge
* Electrical Transients
* Radiated Electric Field
* Conducted Energy
* Magnetic Field Energy
|
|
These are made of a reed switch, which can be switched by a
magnet.
There is no mechanical movement and the contacts are protected
and hermetically enclosed in a glass bulb which contains
inert gasses, mechanical and electrical deterioration is
therefore kept to minimum.
The standard version is supplied with open, closed and changeover
contacts.
-SMC cylindrical series is available with threaded metallic housing
for 6-8-10-12-18 mm. dia. and smooth 12 mm is available with
threaded 9PG.
-SMP series is available with plastic or metallic rectangular housing
for 15x8x32 mm. dimensions.
-SMC-12LM/18M/09PGM are available with power reed
-Different types of magnets are available
-SMC types are used for frontal sensing and SMP types are used
for side sensing.
Special versions can be supplied upon request, when
large quantities are involved
|
|
MPS4452S
Contact Form / Style: (A) Normally Open
Switching Voltage: 1500 Vac
Switching Current: 0.5A
Switching Capacity: 10.0VA Max.
Contact Resistance: 150 mOhms Max.
Switching Distance: 10.0mm Min. (0.394in)
Size: Length: 20.0mm (0.787in)
Height: 6.0mm (0.236in)
Width: 14.0mm (0.551in)
Leadwire Length: 300mm (11.811in)
|
|
|
|