|
|
SPECIFICATIONS
- Pump Body: Glass Filled Polypropylene
- Elastomers: Diaphragm made of Santoprene* Valves made of Viton
- Hardware: 316 Stainless Steel
- Pump Design: Four-Chamber Diaphragm
- Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)
- Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread
- Motor: Permanent Magnet with Thermal Overload Protection
- Shipping Weight: 5.5 lb (2.5 kg) approx. (12/24 V models)
- Duty Cycle: Continuous at 15 psi (1 bar) and 70°F (21°C) ambient temperature
- Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)
- Viscosity: 250 cP maximum
Features::
• Self Priming.
• Can run dry without damage.
• Flow to 4GPM/15LPM.
• Thermal Overload Protected Motor.
• Snap-in 1/2" Dia. Port Adapters.
• Easy Installation.
• Low Amp Draw.
• Quiet Running
|
|
SPECIFICATIONS
Pump Body: Glass Filled Polypropylene
Elastomers: Diaphragm made of Santoprene* Valves made of Viton
Hardware: 316 Stainless Steel
Pump Design: Four-Chamber Diaphragm
Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)
Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread
Motor: Permanent Magnet with Thermal Overload Protection
Shipping Weight: 7 lb (3.2 kg) approx. (12/24 V models)
Duty Cycle: Continuous at 40 psi (2.8 bar) and130°F (54.4°C) ambient temperature
Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)
Viscosity: 250 cP maximum
|
|
ILMVAC diaphragm pumps are available:
- with different materials for chemical or physical processes
- with regulated or unregulated vacuum
- with different pumping speeds and final pressures
Advantages:
- compact and space saving design
- quiet running
- long lifetime
- very easy to service
- low operating costs
Range of applications:
- for dry, oil-free applications in the rough and medium-high vacuum range
|
|
|
Welcome to the newest Line of rugged Dia-Vac® Pumps! The High Performance double head Dia-Vac® pump will provide greater response in the most demanding applications!!! These durable pumps are available with General purpose, TEFC, Air Driven, Explosion proof UL/CSA Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts are available with aluminum or 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 0-84 LPM, 0-60 PSIG. You can count on the new high performance Dia-Vac to pass you gas with confidence!!
|
|
Completely different and a lot better
The Albin Pump AD is designed for a large capacity and long service life. Compared to traditional AODD pumps, it offers 70% lower pulsation, higher power, noise reduction and 3%u20135 times longer operation time between service intervals. The compact outer measurements and capability to install the pump upside down, sideways or vertically means flexibility during installation and set up. What%u2019s more, it is designed so that all vital parts are easily accessible without having to remove the pump from the pipe system, greatly minimizing downtime. All these improvements result in lower operational costs, reduced cost for spare parts and improved overall economy.
|
|
These balanced series of compressed air driven, double diaphragm pumps consists of two series: Verderair VA all purpose, multi-functional diaphragm pumps and Almatec diaphragm pumps for advanced/difficult applications. Both non metallic and metallic versions are available.
Advantages and characteristics: Simple installation; Maintenance friendly; Easy to operate; Self-priming when dry; No air lubrication needed; Sanitary, Ultra-pure and high pressure versions.
|
|
Almatec is one of the world’s leading brands of pneumatic diaphragm pumps. The first pumps were delivered in 1984. The technology is based on decades of experience in the pump sector. Numerous trend-setting developments resulted and the product range diversified to provide solutions to a whole variety of problems.
Since the company was founded, it has produced and delivered over 100,000 pumps.
Models
Verderair offers with the Almatec-series two main ranges of pumps; for standard, and for specific applications.
Standard applications
Pumps for the ‘normal’ applications are extremely suited for pumping all kinds of chemicals, slurries, coatings, paints, solvents, acids, glues, resins and powders.
The pumps are available in several types of plastics (PP, PE, PTFE) but also in stainless steel. Capacities are up to 800 l/min.
|
|
|
|
|
|
Verder has chosen a wide variety in materials to offer solutions for the complete industry. We make a difference between housings in non-metallics and metallics.
Verderair are highly engineered diaphragm pumps, delivering a smooth, reliable flow at all circumstances. The new air valves design guarantees a perfect, non-stalling operation, even at low pressure and does not need any lubrication. Thanks to their unique design, they are able to handle very abrasive and / or viscous products.
The Verderair will run dry indefinitely without damage. Verder has selected those materials, which offer the best combination of benefits to the end user. The used wetted pump part materials are Acetal, Polypropylene, Kynar, Aluminium, Cast Iron and Stainless Steel. For ball and /or diaphragm, VERDER selected PTFE, Hytrel, Santoprene, Viton, BUNA-N, SS and Acetal.
NEW - Atex: Verderair offers now pumps in a conductive polypropylene housing. With this unique material you can benefit from the polypropylene-advantages in an Atex environment.
The flow range is from 0.1 up to 1,060 l/min and pressures up to 8 bar (or 16 bar for high-pressure models).
|
|
The double diaphragm system increases safety when sampling expensive or extremely hazardous gases. Should the primary diaphragm fail, the other diaphragm keeps the sample flow intact. The 1/8" NPT port connection allows the user to add a leak detection system and alarm. The detection system monitors the diaphragm for failure analysis and assures system integrity until maintenance can be performed.
Single Head Double Diaphragm Sampling Pump (R221-FT-AA1-D shown here)
|
|
TYPICAL APPLICATIONS
DDP 3/4 IN.
The DDP Series is a high pressure, air-driven diaphragm pump, ideal for fluid transfer. They are corrosion-resistant, self-priming, self-cleaning, portable and inherently exlosion proof.
FEATURES
Pump Body: Black DuPont Teflon coated aluminum
Diaphragms: Teflon
Ball Check Valves: Delrin or stainless steel
Wetted Components: Stainless steel
|
|
High pressure diaphragm pump units are used for the zero-leakage handling of hazardous, toxic and difficult media. State-of-the-art design features ensure high operating safety, economy and availability. They are characterised by their space-saving construction and flexible drive variants.
- Pressure max: 350 bar
- Capacity max: 850 l/min at 120 bar
250 l/min at 350 bar
- Power: 250 kW
- Weight: 10 t
|
|
ALMATEC's high-pressure diaphragm pumps have been specially developed for charging filter presses with chemical wastes and special sludge.
With a driving pressure of max. 7 bar, the pumps of series AH build up a delivery pressure of 16 bar on account of the internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h (AH 15), 10 m³/h (AH 25) and 20 m³/h (AH 40).
All housing parts in contact with the product are made of PE UHMW. This polymer material is seven times more resistant to abrasion than PP. PE is also more resistant to wear than cast iron, aluminium and even steel.
|
|
The Micro Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. Maximum performance range: 0-13 LPM, 0-28”Hg, and 0-30 PSIG.
Double Head Diaphragm Sampling Pump (B162-FP-AA1 shown here)
|
|
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
JABSCO'S PUREFLO 4-piston diaphragm pump is designed to be used in pharmaceutical, biotech, food or cosmetic applications. The design complies with the stringent requirements of these industries.
The pump and controls are mounted in a stainless steel cabinet. The system can be cleaned easily and the simple construction allows safe and easy use.
Typical Examples:
Solutions containing proteins; Suspension of cells
Bacteria, yeast, fungi, mammalian cells
Suspensions containing viruses
Filtration, chromatography
Solutions or suspensions of polymers
Feed pump for centrifuges and separators
Feed pump for filter systems
Ingredients for food and/or cosmetics
|
|
The DVP is a membrane pneumatic pump high specifications of a 1:1 report/ratio developed for the direct power supply of the paint guns and
liquid product.
This concept guarantees a constant direct food and virtually without pulsations of the guns by avoiding the cost and the complications of a regulator of fluid or a clearing house.
Range DVP includes pumps alone, assembled pumps and offers
complete "ready with employment" matched with guns of high fame, DeVilbiss Advance or FLG5. Pump DVP is ideal for a use with ALL the TYPES of technologies of gun, conventional, Trans-Tech©, HVLP,
LVLP or electrostatics.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
The ProMinent® Duodos pumps are air operated diaphragm pumps. Since they are pneumatically operated the pumps require no electric components. The pump is dry-proof and self-priming. The pump feed rate can be adjusted by changing the pressure in the air supply. The pumps feed up to approx. 6 700 l/h media to a feed lift of 70 m.
Advantage
* Self-priming
* Dry-proof
* High Suction capacity
* No electric components
* No pressure relief valves required
Application Areas
Feed of abrasive, viscous, highly sensitive and gaseous media.
|
|
Features
- 2 chamber dual diaphragm
- Positive displacement
- On demand operation
- Chemical resistant polypropylene body
- 30 to 60 PSI (2.1 - 4.1 bar)
SHURflo's 166 Air Operated Demand Pumps employ a dual diaphragm design, with a patented fast action switching mechanism allowing for consistent flow and pressure. They are built for the toughest pumping applications and are available in a variety of elastomers that allow them to be compatible with mild caustic or acidic fluids. Ideal for chemical transfer, injection and spraying.
|
|
|
|
|
|
JESSBERGER air operated diaphragm pumps are suitable for nearly all applications. They can also pump media with high viscosities - also with particles or at abrasiveness.
Pumps can be supplied in Polypropylene, PVDF, Aluminium or Stainless steel. Manufactured sizes are available from 1/4" (5 l/min) up to 3" (850 l/min; both at 7 bar operating pressure.)
The advantages of an air operated diaphragm pump are:
- Can be used with non-lubricated air
- Also suitable for very humid environments
- Can be used in hazardous areas or for flammable media
- Also suitable for very aggressive or viscous media
- Flow rate and delivery head can be adjusted over air pressure
- After manifolds have been splitted two media can be pumped
- Different connections at suction and discharge side
- Dry running possible
- No electrical connection neccessary
- Dry self priming
- Easy change of spare parts and simple maintenance
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
Automotive Cleaning and Recycling;Chemical Transfer and dispensing;Bag-In-Box chemicalsParts Washers ;Car Wash Systems;
Features:
• Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
• Robust Design with durable integral mounting
• Patented Shuttle Valve, eliminates stalling
• Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
• Corrosion Resistant materials capable of handling a wide range of chemicals
• Sanitary design with insert molded diaphragm (Santroprene only)
• Leak Resistant radial seals, no critical o-ring sealsQuiet Operation with large exhaust muffler
• Ease of Installation with all quick disconnect ports
|
|
|
Standard Duty Metallic Pumps are ideally suited for intermittent/on-demand, portable moderately abrasive fluids and suspended solids. Standard duty metallic pumps are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
|
|
|
Standard Duty Metallic Pumps are ideally suited for intermittent/on-demand, portable moderately abrasive fluids and suspended solids. Standard duty metallic pumps are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
|
|
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates from 4-8 litres/min (1-2.1 US gallons/min)
Features::
• Handles Water-like and Viscous Liquids Up to 250 cP
• Chemical-resistant polypropylene pump head for long life
• Latest techhnology internal check-valves for reliable self-priming
• Choice of elastomers for maximum chemical compatibility
• Internal bypass for excellent performance range
• Optional pressure-switch control to run the pump only as needed
• Available with long running heavy duty motor with built-in thermal overload
• Available with commercial-duty DC monitor for continuous operation
|
|
|
diaphragm pumps, vaccum pumps, flussigkeitspumpen diaphragm pumps, diaphragm pump, flussigkeitspumpe, umwalzpumpen, umwalzpumpe, piston diaphragm-pump, piston diaphragm-pump email send vaccum pumps, vaccum pump, miniature-pump, miniature-pump, micro-pump, micro-pump vaccum pumps, diaphragm pumps vaccum pump, diaphragm pump, flussigkeitspumpe diaphragm pumps, vacuum pumps, liquid pump, oem pump, gas pump diaphragm pump, vacuum pump, liquid pump, micro pump, miniature pump
|
|
Self-priming diaphragm pump with 110-240v AC electric motors. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi)
Features:
• Handles Water-like and Views Liquids Up to 250 cP
• Chemical-resistant polypropylene pump head for long life
• Latest techhnology internal check-valves for reliable self-priming
• Choice of elastomers for maximum chemical compatibility
• Internal bypass for excellent performance range
• Optional pressure-switch control to run the pump only as needed
• Available with long running heavy duty motor with built-in thermal overload
• Available with commercial-duty DC monitor for continuous operation
|
|
Features:
* Self priming up to 8 vertical feet (2.4m)
* 6' power cord
* Chemical resistant materials
* Can run dry without damage
SHURflo internal bypass pumps are the answer to applications where an automatic demand switch is not required. Pumps with bypass will continue to run at high pressure. Ideal for intermittent and continuous duty applications. They can be mounted in any position, are compact, and are designed for easy maintenance.
|
|
DB5 Series (Exhaust & Suction)
Silent Air Pump Built-in Type
* Extremely Quiet
* Long Life
* Low Power Consumption
* Low Vibration
* Oil-less, Contamination-free exhaust air
* C.E. Compliant and U.L. listed Models
Ideal for: Medical /Environmental /Consumer Industrial
*Air Surface/ Air Beds/ Air Mattress
*Nebulizer
*Aspirator
*Automatic/ Robotistic Equipment
*Air Sampling
*Gas Analyzer
*Ozone Generator
*Massage Chair
|
|
Air pumps APN-W series
The APN-W series are gas-liquid transfer pumps. The use of a special diaphragm allows the pump to transfer both air and liquid. The miniaturized & lightened body offers optimum sizing for various equipment such as analyzers, in which compactness is always a key requirement.
- Design for transferring both gas and liquid ensures long life.
- Ideal for waste liquid collection thanks to the ability to handle entrained gas.
- Ultra-compact and lightweight
- High corrosion resistance
- Low noise design
- Oil-free design
- Capable of self-priming under dry condition.
|
|
|
|
