|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
The DOSTEC dosing pumps are heavy duty, high precision diaphragm pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
In a class by itself - the LK is a motor driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and maximum pressure of 225 PSI (1.5 MPa).
This expanded flow range makes the LK a perfect compliment to the E-Class Metering Pump Line.
The LK Series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
|
|
FEATURES
Simple Design
Easy to Maintain
Intrinsic Safety of Pneumatic Operation
Stroke Length and Stroke Rate Adjustment
High Flow Turndown
Corrosion Resistant Construction
All 316 SS or TFE Wetted Parts
Ease of Installation
Recommended for discharge pressures below 120 PSI
|
|
Dry and Oil-Free!
The Ideal Backing Pump for Pfeiffer Vacuum Turbopumps.
Dry and oil-free diaphragm pumps with a pumping speed of 6 to 160 l/min. They are ideally suitable for being used as a backing pump for Pfeiffer Vacuum turbopumps and for integration into compact systems.
|
|
Features :
- Pressures up to 150 PSI (10.3 bar)
- Self priming up to 8 vertical feet (2.4 m)
- Chemical resistant materials
- Designed for heavy duty spraying and fluid transfer applications
- Can run dry without damage
- Built in check valve
The 8000 Series diaphragm pump is SHURflo's most widely used Industrial pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming. Up to 1.8 GPM (6.8 l/min).
|
|
HDF (SA) Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line size solids requirements. HDF feature:
* All HDF pumps are configured in bottom discharge porting arrangements
* Thick wall constructed of Sand Casted Aluminum, Cast Iron and Stainless Steel w/elastomer
* TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves
* Enhanced with an extended wear package
* Hinged flap check valves
* Solids range +1" (25mm) to 3" (76mm)
* Dry primes up to 24 feet of water
|
|
|
For continual delivery of low to medium viscosity dispersion adhesives under electronic material control, double-membrane diaphragm pumps are ideal.
|
|
|
|
|
|
Monitored RuppGUARD® Serie pumps provide safer handling of aggressive or hazardous liquids. RuppGUARD chambers filled with neutral or compatible fluid prevent leakage into the environment in case of diaphragm breach. No pumped fluid enters the air valve or exhaust and pressurized air cannot enter the fluid pumped. Mechanical, visual & electronic leak detection available for local or remote alert.
Pipe Size: 1" / 25mm
Displacement Per Stroke: .09 gal / .34 ltr
Max. Flow per Minute: 42 gal / 159 ltr
Max. Solids Handling: .25" / 6mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: .30 gal / 1.14 ltr
Max. Flow per Minute: 90 gal / 340 ltr
Max. Solids Handling: .25" / 6mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
Spill Prevention.
Product range from:
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: .36 gal / 1.36 ltr
Max. Flow per Minute: 80 gal / 340 ltr
Max. Solids Handling: .47" / 12mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .9 gal / 3.41 ltr
Max. Flow per Minute: 238 gal / 901 ltr
Max. Solids Handling: .71" / 18mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
|
|
Capable of transferring clean gas
The pumps in this series are of the diaphragm type and excel in airtightness. The pump keeps the handled gas clean while compressing, suctioning, and transferring. Therefore, this pump is ideal for gas analysis and for suction and exhaust of special gas.
Wide variety of models
All pump models in this series are available as standardized single or two-heads in parallel or series. This wide variety of models, combined with various material compositions, makes it possible to handle any type of gas.
Superior durability
The pump uses a new type of diaphragm that can withstand continuous operation over a long time. The other parts used in the pump also have greatly improved durability over conventional models.
|
|
Features::
• Compact Design Measuring 6.4" (162 mm) in Length
• Fully Automatic Demand Pump
• Self-priming and Can Operate Dry Without Damage
• Built-in Thermal Protector
• Sealed Pressure Switch and Motor
• Flow Rates to 1.0 GPM (3.8 L/min.) and Operating Pressures to 25 PSI (1.7 bar)
• Compact automatic demand pump.
• Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
• Self-prlming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.
|
|
|
Standard Duty Metallic Mine/Construction Pumps are ideally suited for on-demand, portable, moderately abrasive fluids, and suspended solids. Standard duty metallic pumps, ideal for mine duty applications, are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Standard Duty Non-Metallic Pumps are ideally suited for highly corrosive fluids, portable, low abrasive fluids, and suspended solids. Standard Duty Non-Metallic Pumps are constructed in Polypropylene, and PVDF with TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Because of the non-metallic materials, these pumps can de water high or low PH levels underground.
|
|
The Murzan CBTU-50 can increase yields, increase production, reduce labor costs and reduce sanitation costs. Yes! It can be accomplished without compromising the integrity of your product, KEEPING VALUE IN YOUR VALUE ADDED CHICKEN. The Murzan CBTU-50 is a dual discharge pump which provides a consistent product flow, keeping your lines full.
Advantages
* EASY TO CLEAN
* Increase Yields – Keeping the marinade in product
* Increase Production – Consistent product flow
* Decrease product degradation
* Reduce labor and sanitation costs
* Oil Free
* No Mechanical Seals
* No Product Contamination
Applications
* The Murzan CBTU – 50 is designed to pump directly from your vacuum tumbler discharge to your IQF, frying lines, or breading tumbler. For the first time, you can pump chicken tenders, fillets, or disjointed wings without damage. We have successfully pumped product at a rate of 10,000 pounds an hour, at a distance of up to 100 feet.
|
|
|
|
|
|
Special Duty USDA Pumps are designed to meet United States Department of Agriculture (USDA) standards. Ball Valve pump sizes include:
SSB!-A 1-1/2" (38mm), 0 to 54 GPM (204 liters), handles solids to 1/4" (6mm), Top Discharge
SSB2-A 2" (50.8mm), 0 to 125 GPM (473 liters), handles solids to 1/4" (6mm), Top Discharge
SET1-A 1" (25.4mm), 0 to 54 GPM (204 liters), handles solids to 1/4" (6mm), Top Discharge
SET2-A 2" (50.8mm), 0 to 123 GPM (465 liters), handles solids to 1/4" (6mm), Top Discharge
Electronic Leak Detector
This leak detector works on the principle of conductance, sensing liquid or condensation entering the air side of the pump. It is installed through a boss on the inner chambers. A probe senses pooled conductive liquid, producing a low current (1.2 volt DC),which signals a control unit. Indicator lights signal not only contamination, but also which side is tainted. The control unit can be easily wired to an audible alarm or pump shutdown mechanism if needed. Modular, water-tight construction. Sensitivity range is adjustable from 500 ohms (2000 micro ohms) to 100.000 ohms (10 micro ohms). Available for 115V (032.017.000) and 220V (032.018.000) power supply. This unit must be purchased separately.
|
|
Features::
• Compact Design Measuring 6.4" (162 mm) in Length
• Fully Automatic Demand Pump
• Self-priming and Can Operate Dry Without Damage
• Built-in Thermal Protector
• Sealed Pressure Switch and Motor
• Flow Rates to 1.0 GPM (3.8 L/min.) and Operating Pressures to 25 PSI (1.7 bar)
• Compact automatic demand pump.
• Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
• Self-prlming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.
|
|
In any situation at all, the oil-free valve technology of Lutz double diaphragm pumps guarantees unobstructed, infinitely variable operation. These pumps are capable of delivering even critical material to be conveyed in a gentle and safe manner. They are equally well suited for aggressive, abrasive or easily inflammable fluids and for media with high viscosity.
- Für thin bodied to viscous liquids
- Absolutely lube free valve
- Can safely run dry
- Can be regulated continuously
- Self-priming dry or wet
- No dynamic seals
- Mobile or stationary use
- Also for continuos operation
- Non-stalling function at low pressures
|
|
|
Graco offers a variety of reliable pumps and accessories for manual and automatic chemical, waste treatment, ink and sanitary applications.
|
|
WR10 SPECIFICATIONS
Shipping wt. 3 lbs. 1.36 kg
Max. pressure 100 psi 6.9 bar
Min. pressure 15 psi 1 bar
Max. particle size 1/16" 1.5 mm
Suction lift (dry) 16.5 ft. 5m
Suction lift (wet) 20 ft. 6m
Air inlet ¼" NPT (f)/BSP
Materials: Polypropylene body with Santoprene elastomers; Polypropylene body with PTFE elastomers; Kynar body with Santoprene elastomers; Kynar body with PTFE elastomers.
BENEFITS:
• Flows to 5 GPM (19 LPM)
• Multiple mounting positions
• Similar envelope dimensions to a standard ¼" pump, but almost double the flow rate
• Cost competitive
• Size ideal for OEM applications
• Dependable operation
APPLICATIONS:
Car wash chemicals
Wash solutions
Dispensing of : pigments, inks, paints, additives, sanitizers
Drum transfer
|
|
UL (Underwriters Laboratory) Pumps are designed to meet
UL79 standards for diaphragm pumps handling flammable liquids.
All Aluminum construction with approved Buna or Virgin PTFE UL
elastomers. Fully groundable to prevent static discharge.!
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty metering pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Mechanically Actuated Refill Valve (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
The EH-HV Series is specifically designed to accurately feed high viscosity chemicals.
* Tested with a 20,000 cps polymer verified with a Brookfield viscometer, Model LVF, at 25° C, #4 spindle at 12 rpm.
Equipped with rugged, machined PVC liquid ends and spring loaded stainless steel valve balls, the HV series is designed for superior valve action and performance. Rated to 20,000 cps*, the HV Series is available in four feed ranges from 1 to 4 GPH (at 50 PSI). Sophisticated design and backed with the industry's only full 2-Year warranty, the EH-HV Series is the perfect solution for high viscosity feed applications.
|
|
• Available pressures up to 150 psi (10.3 bar)
• Pump is sealed in corrosion resistant material, thus offering unparalleled performance and life
• Bypass System eliminates pulsation and cycling
• Latest co-injection mold diaphragm technology virtually eliminates potential leak paths
• Wetted materials designed to withstand many corrosive chemicals*
• Variable Speed Drive optional
|
|
Hypro high pressure diaphragm pumps are recommended for spraying of herbicides, pesticides, liquid fertilizers and many other hard to handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.
Pressure and output are designed for optimum performance of medium to large-sized sprayers. Hypro high pressure diaphragm pumps are supplied with single or double-splined through-shafts. Pumps include pulsation dampeners.
Performance Information
- Max. flow: 21.4 gpm/81 lpm
- Max. pressure: 725 psi/50 bar
- Max. rated speed: 550 rpm (D813); 3600 rpm (D813GRGI)
- Max. fluid temperature: 140°F/60°C
|
|
EH2-M
These air-powered, single diaphragm metallic pumps deliver discharge pressure twice the inlet pressure, up to 250 psi (17 bar). Designed for filter press feed or similar applications requiring higher discharge pressures.
Pipe Size: 2" / 50mm
Displacement Per Stroke: .22 gal / .83 ltr
Max. Flow per Minute: 25 gal / 95 ltr
Max. Solids Handling: .25" / 6mm or 2" / 50mm
Max. Discharge Pressure: 250 PSI / 17.2 BAR
|
|
|
|
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Williams and Milton Roy have combined technologies to design a pump, blending the proven mRoy® hydraulic by-pass diaphragm design with the Williams "V" Series pump. The result is the low volume, high turndown characteristics of a pneumatic drive coupled with the chemical containment and high pressure capabilities of a hydraulically actuated diaphragm.
The WilRoy is a hydraulically actuated diaphragm pump which delivers chemical containment, low maintenance and overpressurization protection with unsurpassed accuracy and repeatability.
|
|
Linear diaphragm pump 40 - 200 l/min
@Features:
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
@Application:
* Sewage /Wastewater treatment.
* Oxygen supply for Fish breeding.
* Inflatable packaging machine.
* Aquaculture Aeration
* Small capacity compressor.
* Air mat/bed.
|
|
|
|
