|
|
|
|
|
|
The FEM diaphragm dosing pump has been specially developed
in order to accurately dose small quantities of liquid over a long
period of time whereby two of its most distinctive features are its
compact size and robustness (pump and electronics). The FEM
pump and electronics makes a complete dosing system which
is suitable for both simple as well as complex applications. With
the functions „quasi continuous flow“ and „batch dispensing“ the
FEM diaphragm pump differentiates itself from pumps based on
alternative technologies eg. piston, gear, syringe and peristaltic
pumps. Other interesting features are its high reliability, a
favourable purchasing price and low maintenance costs.
KNF has developed a specially programmed electronic control
module so that the integrated solenoid valve and the movements
of the diaphragm are exactly synchronised. This results in an
exact dosing which is gentle and low in pulsation. In addition
to these unique pump characteristics the control module also
allows a wide range of control possibilities to be used eg.
serial interfaces.
The dosing pump is self priming, maintenance free and can
be run dry
|
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure.
|
|
Bellows metering pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and non corrosive fluids. Accurate and repeatable to 0.5% from stroke to stroke, when pump is set 50% to 100% of full stroke. Dry run capability, self priming, and no dynamic seals. Discharge pressure is maintained over the entire flow range of the pump. Poppet valves are utilized to prevent backflow; and springs are available to provide a positive shutoff, preventing siphoning through the pump in applications where a positive suction head exists.
Typical applications include film and x-ray processors, silver recovery systems, wafer and silicon chip washers and processors, detergent dispensers, blood analyzing equipment, industrial floor scrubbers, thermo therapy equipment, waste removal systems, and wastewater and water treatment systems.
|
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
Compact and Economical
CHEM-FEED® Metering Pumps are suitable for a variety of water and wastewater treatment applications. CHEM-FEED pumps feature Blue-White's exclusive Heavy Duty Pump Head with, double ball inlet and outlet cartridge type ceramic check valves, constructed of tough PVDF. Each valve has two ceramic checks, and is double sealed with Viton and TFE/P o-rings. The double ball valve design provides enhanced priming, and is exceptional for purging air and gas. Several models are offered in a wide range of output capabilities, voltage options and material variations. In addition, CHEM-FEED pumps can be customized for volume purchasers with purchase order contracts.
|
|
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
The DOSTEC dosing pumps are heavy duty, high precision diaphragm pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
In a class by itself - the LK is a motor driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and maximum pressure of 225 PSI (1.5 MPa).
This expanded flow range makes the LK a perfect compliment to the E-Class Metering Pump Line.
The LK Series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty metering pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Mechanically Actuated Refill Valve (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
The EH-HV Series is specifically designed to accurately feed high viscosity chemicals.
* Tested with a 20,000 cps polymer verified with a Brookfield viscometer, Model LVF, at 25° C, #4 spindle at 12 rpm.
Equipped with rugged, machined PVC liquid ends and spring loaded stainless steel valve balls, the HV series is designed for superior valve action and performance. Rated to 20,000 cps*, the HV Series is available in four feed ranges from 1 to 4 GPH (at 50 PSI). Sophisticated design and backed with the industry's only full 2-Year warranty, the EH-HV Series is the perfect solution for high viscosity feed applications.
|
|
|
|
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
MacRoy D
Multi-function discharge valve for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
|
The gamma/ L is the world's first calibrateable pump of its performance class. The metered quantity is directly displayed in l/h. The large illuminated LC display makes sure that all displayed variables are simple to read. The integrated 2-week Process-Timer (optional) offers an extremely wide range of application possibilities.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Triple Diaphragm Design
Double Ball Check Valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675
|
|
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Iwaki America Bellows Metering Pumps offer:
* Blow-molded polypropylene bellows ensuring even wall thickness for long life.
* Standard bellows available in 1”, 1½” and 2”sizes
* Simple liquid end construction, assuring trouble-free pumping
* Anti-syphon spring (Hastelloy C) available
* Sure-seating elastomeric poppet valves provide positive backflow protection<
* Optional duckbill valves for slurries<
* Multiplex units utilizing quiet, durable nylon gear-drive.
* Easy front access to each head for output adjustment and service in multiplex units.
|
|
Corrosion resistant, multi-purpose pump
Manufactured using a combination of polypropylene and synthetic rubber, the pumps in this series can handle acids, alkalis, and various corrosive chemical solutions. Furthermore, capable of dry run operation and self-priming, these pumps can be used for multiple purposes as desired.
Leakage-free, safe structure
Since the pumps in this series are free of shaft seal, there is no trouble caused by liquid leakage. Also, the pump has its motor protected with a cover.
Superior durability
The specially designed bellows, molded as a single body, can ensure tens of millions of expansion and contraction cycles. Combined with its rugged drive mechanism, the pump provides superior durability.
Wide range of discharge capacity
The pump provides three types of flow rates by changing its bellows. Moreover, if the pump is a multi-head type, proportionate injection of several different liquids is also possible.
|
|
General description:
ELADOS EMP metering pumps are reciprocating positive-displacement pumps with a special electrical motor drive which has been tried and tested in the field. The use of various types of controller means that the pumps can be adapted to any operating procedures for quantitative and proportional metering.
Features :Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
|
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely.
|
|
|
Metering pumps with mechanically linked diaphragms are almost universally applicable in the low pressure range. They offer a favourable cost/performance ratio at minimum service effort.
|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
| ... products without technical information |
| |
|
|
