|
|
Application
Diaphragm pumps manufacturer of the NT-series are oilfree dry running pumps for the generation of vacuum as well as the delivery and evacuation of gases and vapours. In chemical laboratories they are the more powerfull and modern alternative to water jet pumps, because they are more friendly to the environment at minimized operation and maintenance costs. Typical applications: on vacuum drying chambers, for distillation, drying, and vacuum filtering but also as backing pump for turbo-molecular pumps, gas transfer and the like. The pumps produce little noise and vibrations and are therefore ideal for installation in sensitive devices (e.g. chemical analysis).
Advantages
There are one-, two- three- and four-stage pumps available. The vacuum performance has been increased considerably, which expands the application field for both laboratory and industrial use. The one-stage pumps are designed for an ultimate vacuum of 70 mbar, the two-stage pumps for 7 mbar, the three-stage pumps for down to 1 mbar and the four-stage pumps for 0.5 mbar. International Protection code for all NT models is IP 42 (except those with switchable dual-voltage motors). The NT pumps are designed very compact and are exceptionally quiet and smooth-running. Smooth housing surfaces (except for the two-cylinder aluminium version) make the NT diaphragm pumps easy to clean. On the whole the pumps work almost maintenance-free. All models have easily changeable cocks and diaphragms. |
|
For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.
Smooth air flow makes these models ideally suited for applications requiring consistent air flow
Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation
Oilless operation means exhausted air is always clean and particle-free
Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction |
|
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Industrial wastewater treatment
* Aquaculture Aeration
|
|
Oil Tank
Sunfab offers its own range of hydraulic oil tanks ST 250 with a number of functional improvements necessary for high performance hydraulic systems.
Sunfab ST 250 radically reduces the air mixture in the hydraulic oil with an oil pipe around the return filter and a tried and tested baffle plate design. Air mixture is the main reason behind noise and cavitation of the pump.
Sunfab ST 250 features an external breathing professional filter, which is fitted in a protected position to reduce the risk of clogging. The filter is connected to the tank via a professional hose.
Sunfab ST 250 is supplied complete with correctly dimensioned connections, filter and brackets.
The oil tank is available in two different materials:
- ST 250 A in aluminium
- ST 250 S in stainless steel
|
|
In the oil reservoir all coming from oil separator is stored and cooled down. Any refrigerant trept with in the oil is boild of.
The size of oil reservoirs required is determined by the number of compressors manufacturer connected, compressor lubricant charge, system refrigeration charge and operating conditions.
|
|
Range supplements from 100 to 3300 liters, on industrial casters, feet, sleeves, with lid.
Containers out of polyester very solid and light, easy of maintenance thanks to the smooth walls and to the corners rounded, being able to contain foodstuffs like many chemicals. |
|
| ... products without technical information |
| |
| Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan manufacturers for cooling. UVD manufacturers of vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar. |
|
Made to complete the Panther range for trasnferring diesel fuel, these pumps are of the rotary blade type, self priming, with high flow rate and easy operation and installation.
Besides featuring an integrated bypass cock and suction filtration, they are aslo equipped with a suppliers of mechanical seal that ensures an high standard of reliability even at low temperatures.
Comapct , safe and reliable , they can be fitted to earthmoving machines, mobile industrial dispensers on motor vehicles and fixed dispensers in case only battery power is available. |
|
High speed delivery system
Direct current motors 12 V and 24 V
Maintenance free
Self priming Simple to install
Can also be used for pumping water
|
|
Ogura’s multiple disk clutches and brakes come in both a dry or “wet” type. The wet (in oil) type can run approximately 3 times faster than that dry type. This is because the oil helps dissipate heat generated at higher RPMs, but you may find it surprising that the wet type can also produce higher operating torque, both statically and dynamically.
Ogura products are manufactured in Europe, North and South America and Asia. Manufacturing plants are ISO9001, 14001 and TS16949 compliant. Clutches and brakes are RoHS compliant.
UK, European and Scandinavian customers please contact Michel Hehnen at mhehnen@ogura-clutch.com. All other inquiries should go to Jim Andes at jandes@ogura-clutch.com. |
|
The Model HC or HCD clutches are designed to be used in either an end of shaft or through shaft mounting configuration. Their compact size makes these units ideal for incorporating within a gear housing. Multiple speed transmissions use a variety of these units to effect fixed mesh speed changes, or they may be used as a stand alone device for disconnect service.
All units incorporate provisions for forced oil cooling allowing high energy engagements to be made without causing themal distress within the disc pack. Cooling oil is introduced from an external supply through axial holes provided in the shaft.
Marine main propulsion forward/reverse or disconnect service, industrial winch disconnects, professional conveyor or mill soft-starts, and multi-speed transmissions are but a few of the applications for the model HC/HCD oil immersed clutches.
|
|
... see all the products in the category
Clutches
|
| ... products without technical information |
| |
Craftsmen and construction workers value the many advantages of the practical heaters of the DZH series. Handy and problem-free to use, they are preferably suited for the de-icing or heating of construction materials, vehicles, equipment, water pipes, supply lines, and so on. These devices also provide for effective, immediate heat in closed, well-ventilated rooms
- Installed oil professional burner in a high-pressure system for EL heating oil or diesel
- Stainless steel combustion chamber
- Direct heater with 100% efficiency
- Integrated professional tank or Oil-reservoir professional fitting
- Easy to transport
- Fully automatic controls |
|
| ... products without technical information |
| |
HyFlex® 11-920
A revolutionary combination of excellent grip and strong oil-repellence.
Combining a sure grip on lightly oiled parts with keeping hands clean and protected from oil contamination has been a real challenge. Now Ansell introduces the uncompromising HyFlex® 11-920. Designed with patented Ansell Grip TechnologyTM, the glove provides an excellent grip on lightly oiled parts while protecting skin from oil contamination. The 11-920 also offers all the essential features of the HyFlex® range of industrial gloves, including durability, comfort and dexterity.
|
|
Oil resistant Nitrile gloves, light flexible and a great alternative to cotton and leather professional gloves.
Designed for wet or dry in light general purpose conditions |
|
HCT 603:
- coating nitrile, impermeable foam (thanks to process HCT) on support J13 Nylon
- palm and back 3/4 coatings
- without seam
- elastic wrist
- individual sachet
Sizes: 8/7/9 /10
EN388: 3121 |
|
Ogura’s multiple disk clutches and brakes come in both a dry or “wet” type. The wet (in oil) type can run approximately 3 times faster than that dry type. This is because the oil helps dissipate heat generated at higher RPMs, but you may find it surprising that the wet type can also produce higher operating torque, both statically and dynamically.
Ogura products are manufactured in Europe, North and South America and Asia. Manufacturing plants are ISO9001, 14001 and TS16949 compliant. Clutches and brakes are RoHS compliant.
UK, European and Scandinavian customers please contact Michel Hehnen at mhehnen@ogura-clutch.com. All other inquiries should go to Jim Andes at jandes@ogura-clutch.com. |
|
The Model HC or HCD clutches are designed to be used in either an end of shaft or through shaft mounting configuration. Their compact size makes these units ideal for incorporating within a gear housing. Multiple speed transmissions use a variety of these units to effect fixed mesh speed changes, or they may be used as a stand alone device for disconnect service.
All units incorporate provisions for forced oil cooling allowing high energy engagements to be made without causing themal distress within the disc pack. Cooling oil is introduced from an external supply through axial holes provided in the shaft.
Marine main propulsion forward/reverse or disconnect service, industrial winch disconnects, professional conveyor or mill soft-starts, and multi-speed transmissions are but a few of the applications for the model HC/HCD oil immersed clutches.
|
|
|
... see all the products in the category
Brakes
|
Realization professional cables details, ANTIOLIO, immersion.
Cut, sguainatura, spelatura from 0,12 to 200 mmq
Seam finishes them and capocorda to knots or preblocks, nastrati or melted.
Labelling to warmth or jet or with professional labels.
Working cables plates step 1,27 and 3,96
Supply Harmonized, special cables, UL, AFUMEX, TEFLON, TEFZEL
Resinatura cables with I rendered some epoxy
Sovrastampaggio cables
Visual tests and work them
Test of rigidity, isolation, short circuit, continuity.
Fatigue tests
Tests of traction
|
|
| ... products without technical information |
| |
|
|
see the results for the following category