|
|
| For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing. |
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
The MultiFertic® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH
In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained.
|
|
HydraCell piston diaphragm pumps are very compact and low-maintenance. By their almost pulsationsfreie and run-calm mode of operation differ this poetryless pumps substantially from conventional pump systems.
The most promotion and dosing tasks are mastered by rotary pumps, multi-level centrifugal pumps, Exenterschneckenpumpen or diaphragm metering pumps only with a very small efficiency.
VERDER HydraCell pump does not only supply to you with an efficiency of over 80%, but is also a economical alternative to well-known reciprocating and rotary pump systems. The high efficiency our VERDER HydraCell pumps is the crucial factor for the small life cycle costs (LCC). |
|
| ... products without technical information |
| |
| The material is fed to the gun at a very high pressure and is then atomized. For work with Spray Mix or Airless guns a pump is used that feeds material with a fixed pump ratio (relation between inlet pressure and material pressure). Via special hoses (with Spray Mix systems it is a hose pair) the material is fed to the gun and is atomized there by means of special nozzles having a very small opening only. In order to improve the surface quality, Spray Mix guns use atomization air which greatly improves the finish result and thus turns the system into an even more universal tool. |
|
High pressure and high fluid flow per cycle increases your production and reduces rod and cylinder wear
Severe Duty rod and cylinder handles the most abrasive coatings
Simple design makes fluid pump repairs easy
Designed for applications requiring large tip sizes, long hoses and high flow rates
Exclusive air valve design minimizes ice-related downtime |
|
They are backed by more than 70 years of experience in pump and air system technology, and include models specifically designed for popular applications.
They include:
Oil Pumps & Packages: Piston and diaphragm pumps to handle all types of motor oil, gear oil, and transmission type fluids. These pumps are designed to pump from different sized drums and tank units.
Grease Pumps & Packages: Grease pumps and pack
ages designed to handle different drum sizes and applications in the workplace.
Specialty pumps: Pump designed for the purpose of evacuating and filling tires with calcium chloride ballast solution. Fuel antifreeze/water blending pump |
|
| ... products without technical information |
| |
Lubricating pumps for marine gearboxes. Gearbox driven direct coupled pumps. Auxiliary lubricating pumps with electric motor drive
Metering pumps for polyols with abrasive fillers with separate bypass valves
Gear pump for hot oil circulation - special design
Metering pump for the polyurethane industry with integral pressure limiting valve, seal chamber and geared servomotor as a complete unit |
|
This drum drainer system for fully opening drum is used to transfer high viscosity products, even those with no flow capacity such as grease, lubricants, glues, silicones, inks or similar products.
This is a hybrid system, pneumatic for the descent of the follower plate, guaranteeing constant feeding of the pump, and electric for the positive displacement CM tec-technology pump to facilitate the transferring of large quantities.
The volumetric pumps that equip this system have a capacity of up to 90 L/min and 10 bars of pressure.
Product Features
Drum drainer pump :
§ CMtec technology with monoblok blades and a curved stator.
§ Hybrid system : pneumatic frame with a follower plate and a volumetric pump.
§ Optional : metering system and a trigger gun.
-Designed for an intensiv use
-Excellent quality/price relation
PERFECT FOR THE PUMPING OF VERY HIGH VISCOSITY PRODUCTS
Such as :
- grease
- glues
- lubricants
-products containing additives
-silicones
-inks
|
|
... see all the products in the category
Drum pumps
|
The present K3V is designed specifically for the earth moving and construction industries where in excess of 700,000 units have been supplied.
Features such as high efficiency , high power density, large self priming capability, long life, low noise and a wide range of control options has enabled the K3V to be a clear market leader.
Adopting a process of continual product development has resulted in todays K3V series of axial piston pumps.
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
| CAT PUMPS specializes in portable FOAM FIREFIGHTING SYSTEMS for fast knockdown of brush and grass wildfires. Our FOAM FIREFIGHTING SYSTEMS feature the twin foam gun delivering a precise metered foam and high pressure spray to quickly control fires. Ultra compact units from 4-18 HP are designed for easy mount onto ATV's, pickup trucks and utility vehicles. |
|
|
|
