|
|
|
Standard Duty Metallic Mine/Construction Pumps are ideally suited for on-demand, portable, moderately abrasive fluids, and suspended solids. Standard duty metallic pumps, ideal for mine duty applications, are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Standard Duty Non-Metallic Pumps are ideally suited for highly corrosive fluids, portable, low abrasive fluids, and suspended solids. Standard Duty Non-Metallic Pumps are constructed in Polypropylene, and PVDF with TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Because of the non-metallic materials, these pumps can de water high or low PH levels underground.
|
|
The Murzan CBTU-50 can increase yields, increase production, reduce labor costs and reduce sanitation costs. Yes! It can be accomplished without compromising the integrity of your product, KEEPING VALUE IN YOUR VALUE ADDED CHICKEN. The Murzan CBTU-50 is a dual discharge pump which provides a consistent product flow, keeping your lines full.
Advantages
* EASY TO CLEAN
* Increase Yields – Keeping the marinade in product
* Increase Production – Consistent product flow
* Decrease product degradation
* Reduce labor and sanitation costs
* Oil Free
* No Mechanical Seals
* No Product Contamination
Applications
* The Murzan CBTU – 50 is designed to pump directly from your vacuum tumbler discharge to your IQF, frying lines, or breading tumbler. For the first time, you can pump chicken tenders, fillets, or disjointed wings without damage. We have successfully pumped product at a rate of 10,000 pounds an hour, at a distance of up to 100 feet.
|
|
|
|
|
|
Special Duty USDA Pumps are designed to meet United States Department of Agriculture (USDA) standards. Ball Valve pump sizes include:
SSB!-A 1-1/2" (38mm), 0 to 54 GPM (204 liters), handles solids to 1/4" (6mm), Top Discharge
SSB2-A 2" (50.8mm), 0 to 125 GPM (473 liters), handles solids to 1/4" (6mm), Top Discharge
SET1-A 1" (25.4mm), 0 to 54 GPM (204 liters), handles solids to 1/4" (6mm), Top Discharge
SET2-A 2" (50.8mm), 0 to 123 GPM (465 liters), handles solids to 1/4" (6mm), Top Discharge
Electronic Leak Detector
This leak detector works on the principle of conductance, sensing liquid or condensation entering the air side of the pump. It is installed through a boss on the inner chambers. A probe senses pooled conductive liquid, producing a low current (1.2 volt DC),which signals a control unit. Indicator lights signal not only contamination, but also which side is tainted. The control unit can be easily wired to an audible alarm or pump shutdown mechanism if needed. Modular, water-tight construction. Sensitivity range is adjustable from 500 ohms (2000 micro ohms) to 100.000 ohms (10 micro ohms). Available for 115V (032.017.000) and 220V (032.018.000) power supply. This unit must be purchased separately.
|
|
Features::
• Compact Design Measuring 6.4" (162 mm) in Length
• Fully Automatic Demand Pump
• Self-priming and Can Operate Dry Without Damage
• Built-in Thermal Protector
• Sealed Pressure Switch and Motor
• Flow Rates to 1.0 GPM (3.8 L/min.) and Operating Pressures to 25 PSI (1.7 bar)
• Compact automatic demand pump.
• Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
• Self-prlming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.
|
|
In any situation at all, the oil-free valve technology of Lutz double diaphragm pumps guarantees unobstructed, infinitely variable operation. These pumps are capable of delivering even critical material to be conveyed in a gentle and safe manner. They are equally well suited for aggressive, abrasive or easily inflammable fluids and for media with high viscosity.
- Für thin bodied to viscous liquids
- Absolutely lube free valve
- Can safely run dry
- Can be regulated continuously
- Self-priming dry or wet
- No dynamic seals
- Mobile or stationary use
- Also for continuos operation
- Non-stalling function at low pressures
|
|
|
Graco offers a variety of reliable pumps and accessories for manual and automatic chemical, waste treatment, ink and sanitary applications.
|
|
WR10 SPECIFICATIONS
Shipping wt. 3 lbs. 1.36 kg
Max. pressure 100 psi 6.9 bar
Min. pressure 15 psi 1 bar
Max. particle size 1/16" 1.5 mm
Suction lift (dry) 16.5 ft. 5m
Suction lift (wet) 20 ft. 6m
Air inlet ¼" NPT (f)/BSP
Materials: Polypropylene body with Santoprene elastomers; Polypropylene body with PTFE elastomers; Kynar body with Santoprene elastomers; Kynar body with PTFE elastomers.
BENEFITS:
• Flows to 5 GPM (19 LPM)
• Multiple mounting positions
• Similar envelope dimensions to a standard ¼" pump, but almost double the flow rate
• Cost competitive
• Size ideal for OEM applications
• Dependable operation
APPLICATIONS:
Car wash chemicals
Wash solutions
Dispensing of : pigments, inks, paints, additives, sanitizers
Drum transfer
|
|
UL (Underwriters Laboratory) Pumps are designed to meet
UL79 standards for diaphragm pumps handling flammable liquids.
All Aluminum construction with approved Buna or Virgin PTFE UL
elastomers. Fully groundable to prevent static discharge.!
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty metering pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Mechanically Actuated Refill Valve (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
The EH-HV Series is specifically designed to accurately feed high viscosity chemicals.
* Tested with a 20,000 cps polymer verified with a Brookfield viscometer, Model LVF, at 25° C, #4 spindle at 12 rpm.
Equipped with rugged, machined PVC liquid ends and spring loaded stainless steel valve balls, the HV series is designed for superior valve action and performance. Rated to 20,000 cps*, the HV Series is available in four feed ranges from 1 to 4 GPH (at 50 PSI). Sophisticated design and backed with the industry's only full 2-Year warranty, the EH-HV Series is the perfect solution for high viscosity feed applications.
|
|
• Available pressures up to 150 psi (10.3 bar)
• Pump is sealed in corrosion resistant material, thus offering unparalleled performance and life
• Bypass System eliminates pulsation and cycling
• Latest co-injection mold diaphragm technology virtually eliminates potential leak paths
• Wetted materials designed to withstand many corrosive chemicals*
• Variable Speed Drive optional
|
|
Hypro high pressure diaphragm pumps are recommended for spraying of herbicides, pesticides, liquid fertilizers and many other hard to handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.
Pressure and output are designed for optimum performance of medium to large-sized sprayers. Hypro high pressure diaphragm pumps are supplied with single or double-splined through-shafts. Pumps include pulsation dampeners.
Performance Information
- Max. flow: 21.4 gpm/81 lpm
- Max. pressure: 725 psi/50 bar
- Max. rated speed: 550 rpm (D813); 3600 rpm (D813GRGI)
- Max. fluid temperature: 140°F/60°C
|
|
EH2-M
These air-powered, single diaphragm metallic pumps deliver discharge pressure twice the inlet pressure, up to 250 psi (17 bar). Designed for filter press feed or similar applications requiring higher discharge pressures.
Pipe Size: 2" / 50mm
Displacement Per Stroke: .22 gal / .83 ltr
Max. Flow per Minute: 25 gal / 95 ltr
Max. Solids Handling: .25" / 6mm or 2" / 50mm
Max. Discharge Pressure: 250 PSI / 17.2 BAR
|
|
|
|
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Williams and Milton Roy have combined technologies to design a pump, blending the proven mRoy® hydraulic by-pass diaphragm design with the Williams "V" Series pump. The result is the low volume, high turndown characteristics of a pneumatic drive coupled with the chemical containment and high pressure capabilities of a hydraulically actuated diaphragm.
The WilRoy is a hydraulically actuated diaphragm pump which delivers chemical containment, low maintenance and overpressurization protection with unsurpassed accuracy and repeatability.
|
|
Linear diaphragm pump 40 - 200 l/min
@Features:
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
@Application:
* Sewage /Wastewater treatment.
* Oxygen supply for Fish breeding.
* Inflatable packaging machine.
* Aquaculture Aeration
* Small capacity compressor.
* Air mat/bed.
|
|
Linear diaphragm air pump DBMX Series 40 - 200 l/min
@Features:
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
@Application:
* Sewage /Wastewater treatment.
* Oxygen supply for Fish breeding.
* Inflatable packaging machine.
* Aquaculture Aeration.
* Small capacity compressor.
* Air mat/bed.
|
|
MacRoy D
Multi-function discharge valve for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
|
The gamma/ L is the world's first calibrateable pump of its performance class. The metered quantity is directly displayed in l/h. The large illuminated LC display makes sure that all displayed variables are simple to read. The integrated 2-week Process-Timer (optional) offers an extremely wide range of application possibilities.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Triple Diaphragm Design
Double Ball Check Valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675
|
|
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Iwaki America Bellows Metering Pumps offer:
* Blow-molded polypropylene bellows ensuring even wall thickness for long life.
* Standard bellows available in 1”, 1½” and 2”sizes
* Simple liquid end construction, assuring trouble-free pumping
* Anti-syphon spring (Hastelloy C) available
* Sure-seating elastomeric poppet valves provide positive backflow protection<
* Optional duckbill valves for slurries<
* Multiplex units utilizing quiet, durable nylon gear-drive.
* Easy front access to each head for output adjustment and service in multiplex units.
|
|
Corrosion resistant, multi-purpose pump
Manufactured using a combination of polypropylene and synthetic rubber, the pumps in this series can handle acids, alkalis, and various corrosive chemical solutions. Furthermore, capable of dry run operation and self-priming, these pumps can be used for multiple purposes as desired.
Leakage-free, safe structure
Since the pumps in this series are free of shaft seal, there is no trouble caused by liquid leakage. Also, the pump has its motor protected with a cover.
Superior durability
The specially designed bellows, molded as a single body, can ensure tens of millions of expansion and contraction cycles. Combined with its rugged drive mechanism, the pump provides superior durability.
Wide range of discharge capacity
The pump provides three types of flow rates by changing its bellows. Moreover, if the pump is a multi-head type, proportionate injection of several different liquids is also possible.
|
|
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi)
Features::
• Handles Water-like and Viscous Liquids Up to 250 cP
• Chemical-resistant polypropylene pump head for long life
• Latest techhnology internal check-valves for reliable self-priming
• Choice of elastomers for maximum chemical compatibility
• Internal bypass for excellent performance range
• Optional pressure-switch control to run the pump only as needed
• Available with long running heavy duty motor with built-in thermal overload
• Available with commercial-duty DC monitor for continuous operation
|
|
General description:
ELADOS EMP metering pumps are reciprocating positive-displacement pumps with a special electrical motor drive which has been tried and tested in the field. The use of various types of controller means that the pumps can be adapted to any operating procedures for quantitative and proportional metering.
Features :Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
|
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely.
|
|
|
Metering pumps with mechanically linked diaphragms are almost universally applicable in the low pressure range. They offer a favourable cost/performance ratio at minimum service effort.
|
|
Natural Gas Operated Pumps are CSA (Canadian Standards Association) certified for operation using sweet or sour natural gas. The pumps are also compliant with NACE Standard MRO175/ISO15156. The sweet gas pump utilizes Aluminum or 316 Stainless Steel wetted construction with Buna or Virgin PTFE diaphragms and check balls.
The gas valve is constructed of Aluminum with Buna elastomers. Pumps are fully groundable, preventing static discharge. A Stainless Steel gas valve option is available on G15 to G30 pumps for corrosive applications.
|
|
For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.
Smooth air flow makes these models ideally suited for applications requiring consistent air flow
Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation
Oilless operation means exhausted air is always clean and particle-free
Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction
|
|
|
|
