|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
Containment Duty Non-Metallic Pumps are ideal for highly corrosive and hazardous chemical fluid requirements. All CD duty pumps are exclusively designed with:
* Containment chambers
* Hydraulically balanced/coupled pumping diaphragm and driver diaphragm assenblies
* Designed to accommodate visual, mechanical and low voltage leak detection devices
* Constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C
* Constructed of Polypropylene and PVDF with TPE (thermal plastic elastomers)
* PTFE options in diaphragms and check valves
|
|
NOVAPLEX pumps are powerful diaphragm process pumps for a variety of applications. They are best suited for critical high pressure installations. Additionally, they can be used when the capability of classical metering pumps is exceeded.
Features of the pump
- Double diaphragm pumpheads with positive diaphragm position control
- Double diaphragm pumpheads with built-in pressure relief valve
- Crank gears with integrated lubrication system
- Crank gear bearings executed as anti-friction bearings
- Modular concept
|
|
|
The Murzan PI 50 is the only diaphragm pump specifically designed to meet the special requirements of the sanitary industry. High efficiency oil free air valve, maintenance free ball check system or flap check valve and total visual inspection of all wetted parts, give the user safe and efficient transfer of foods, cosmetics and pharmaceuticals - USDA listed, FDA approved, the PI 50 Series is manufactured to meet general 3-A Standards.
|
|
Features
- Self priming up to 8 vertical feet
- Can run dry without damage
- 12 VDC operation
- Built in check valve
This compact and economical pump can be used for general purpose water delivery, or will dispense on demand using the built-in 60 PSI pressure demand switch. All 8000 Series positive displacement pumps are self priming, and will run dry without damage. Designed for 12 VDC operation, this pump can be equipped with the compact Twist-on Strainer for added reliability. Pump's unique design allows for easy maintenance, unmatched reliability and trouble free performance.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
Features:
- Fully automatic
- Quiet operation
- Self priming
- Corrosion resistant
- Can run dry without damage
These boost systems include high flow 2088 Series or Power Twin Pumps with a 2 gallon stainless steel accumulator tank to deliver instantaneous water flow to remote homes and cabins.
|
|
This basic, Marathon® pump is constructed from 316L Stainless Steel. The pump offers the following benefits: material options suitable for a wide range of chemicals, simple construction for easy maintance and self-priming for emptying containers.
Product range from:
Pipe Size: .25" / 6mm
Displacement Per Stroke: .003 gal / .01 ltr
Max. Flow per Minute: 4.4 gal / 16.6 ltr
Max. Solids Handling: .079" / 2mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .94 gal / 3.56 ltr
Max. Flow per Minute: 235 gal / 889 ltr
Max. Solids Handling: .38" / 9.5mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
|
|
Ideal for:
Fish breeding equipment (oxygen supply)
Air mat (Continous air exhaust)
Air bearing
Burner (air supply)
Scientific and Chemical instruments (Analysis and agitation)
C Series Product features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Custom OEM Models
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
Ideal for:
-Air Sampling
-Gas Analyzers
-Liquid Agitation
-Medical Nebulizers
-Aerobic Wastewater Treatment
-Ozone Generators
-Sequential Compression Devices (Circulation Therapy)
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Custom OEM Models
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
The D-LAB membrane pumps with their chemically resistant Teflon heads, diaphragms and Kalrez valves offer the chemical or pharmaceutical laboratory user a wide range of choice, either used as stand-alone pumps or as part of a sophisticated system.
The one head, 100 mbar ultimate vacuum pumps are suitable for use with drying equipment or for replacing water-jet pumps, whilst the two head, 8 mbar ultimate vacuum pumps are suitable for rotary evaporation, gas transfer and a wide range of medium vacuum applications.
The pumps are designed so that they can be upgraded by the addition of a range of accessories. The accessories are supplied with all the required connections and no special tools are needed to fit them.
|
|
Features:
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Wastewater Treatment
* Aquaculture Aeration
|
|
Product Features
* Custom OEM Models
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Wastewater Treatment
* Aquaculture Aeration
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
|
|
|
|
Introduction
1. does not have to fill pilots, Energy reaches as high as 7m, lifts reaches 50m, the outlet pressure >= 6kgf square centimeters. The mobile width shades, is good through the performance, allows both to be able to pull out through the QBY air operated diaphragm pump delivers the mobile liquid, and can transport some not easy mobile medium, has the self-priming pump, dives the water pump, the shield pumps, the sludge pump and the impurity pumps and so on to transport the machinery many merits.
2. biggest pellets, the diameter reaches when 10mm pulls out delivers the mud, the impurity, to pumps the attrition really micro.
3. lifts, the current capacity passable air valve has opened the realization stepless regulation. (Barometric pressure adjustment in1-7kg square centimeters between).
4. pump has not revolved the part, does not have the axis to seal the medium which the mutual lack of understanding will pull out delivers with the movement part which will pump, the actuating medium completely separates, will transport the medium will not be able to divulge to outside. Therefore pulls out delivers virulently, is easy when volatilizes or the corrosive medium, cannot cause the environmental pollution and harm the personal safety.
5. does not need to use electricity, in flammable, the explosive place use safe is reliable.
|
|
General description :
A proven pump out housed in an attractive fiberglass enclosure. The enclosure integrates the pump, suction hose and rinse hose into a convienent dockside system.
Specifications:
- 20 GPM Diaphram Pump, 57 strokes per minute
- 25' Flexible 1-1/2" Suction Hose (optional 50' available)
- Discharge Head 20' maximum
- Suction Lift 20' maximum
- Stainless Steel frame
- Stainless Steel Hardware
- 36" x 36" footprint
- Ball Valve shut off and sight glass hose section at operator end
- Reliable cam lock connections
- 350 lb. shipping weight / 300 lb. operational
- Power Switch supplied by customer
- Optional Coin or Token operation available
- Optional Explosion Proof Motor available for fuel dock installation
|
|
CMP-32 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17L Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-18 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure.
Technical Features:
1.High system pressure.
2.Non-metallic construction.
3.Compact size.
4.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
5. Uncontaminated flow.
|
|
|
The Murzan PO 50 is the only sanitary diaphragm pump specifically designed with the needs of the poultry industry in mind. This pump can easily handle solids up to 6" (15 cm) in diameter or 7" (17 cm) long without damaging the product; suitable for pumping necks, gizzards, livers, hearts, feet, blood, or any other application in a poultry processing plant. The Murzan PO 50 is FDA approved and USDA Meat & Poultry listed.
|
|
|
|
|
|
Hygienic Diaphragms for Hygienic Diaphragm Valves
To achieve optimum diaphragm performance, only the highest-grade specially engineered materials are used in our diaphragm production. Steam cycle testing is performed on all grades of Top Line diaphragms to ensure the best possible life span of the diaphragms. Compliant and registered ISO 9001-2000 Quality Management System (QMS).
Reliability, availability and low pricing are key features that make our replacement diaphragms attractive to reducing the total cost of ownership and minimizing costly downtime. Top Line diaphragms are interchangeable with key industry manufacturers when a threaded or bayonet type connection is required.
EPDM elastomer diaphragm features:
•Proprietary low extractable steam grade material
•Superior cycle life
•FDA compliant & USP Class VI certified by NAMSA
Viton elastomer diaphragm features:
•High chemical resistance with the life cycle benefits of an elastomer
•FDA compliant material
TFM faced high pressure molded diaphragm features:
•Steam grade material
•Superior cycle life
•Better density
•Virtually non-permeable
•FDA compliant & USP Cladd VI certified by NAMSA
Certifications & Approvals
Top Line Grade 1KS & 2KS diaphragms are manufactured utilizing a proprietary unique high pressure molding technique that ensures better density and is virtually non-permeable. More importantly, this process significantly increases the cycle life of the diaphragm under harsh conditions.
|
|
| ... products without technical information |
| |
|
|
