|
|
Since 1984 ALMATEC manufactures special pumps for the chemicals supply and circulation in the semiconductor industry. The latest generation is the FUTUR, a pump series particularly developed for the special requirements of these applications.
The liquids handled in the semiconductor industry set different demands to the pumps. Therefore the FUTUR series is available in four materials:
4 sizes made of PTFE/UPPE for acids and caustics up to 130°C (model FUTUR T)
2 sizes made of PTFE for hot applications with acids and caustics up to 200°C
(model FUTUR H)
4 sizes made of UPPE for slurries
(model FUTUR E)
2 sizes made of stainless steel (SS 316 L) for solvents (model FUTUR S)
|
|
Macro Dia-Vac® gaseous diaphragm sampling pumps are completely self contained and may be used for either built-in or portable applications. These economical oil-free, contamination-free and leak-free Dia-Vac® pumps offer up to 13 SLPM, 23 InHg, and 29 PSIG in a single head configuration. Macro Dia-Vac® pumps are exceptionally quiet and are available with Aluminum or Teflon-coated Aluminum wetted parts. They are an ideal choice for OEM customers.
Single Head Macro Diaphragm Pump (J161-BF-AA1 shown here)
|
|
- combination of a diaphragm pump with a rotary vane pump
- for the fine-vacuum range in special applications, e.g. for aggressive gases and vapours, for evacuation of solvent recovery vapours, for pumping of vapours which are soluble in oil
- example of use: freeze drying
|
|
|
|
|
|
The pump for food liquids CARBUSET AP 25 F is a diaphragm pump activated by a lever. It is made from a technopolymer material that guarantees maximum resistance to the mechanical stress to which the pump may be subjected to; and it is thus suitable for outdoor use. All the metal parts are made from stainless steel.
The pump unit is chemically compatible with the most commonly used liquid foods. Temperature range of liquids: + 10°C to + 40°C.
The pump can be used in either a vertical or a horizontal position when anchored appropriately by means of four M5 screws. The cover of the pump is fastened to the body by means of a bayonet coupling: this system enables the pump body to be cleaned and the lever to be positioned parallel or perpendicular to the flow of liquid, if required.
Here is a list of the principal liquids that can be decanted: Non-alcoholic drinks or alcoholic drinks containing less than 5% alcohol by volume; Water, cider, fruit or vegetable juices, must, fruit cremogenates, lemonade, soda, syrups; Bitters, vegetable infusions, coffee, tea, liquid chocolate, beer; Alcoholic drinks containing 5% or more alcohol by volume; wine, brandy, liqueurs; non-denatured ethyl alcohol; Vegetable oils; Milk: whole, semi-skimmed or skimmed; Vinegar.
The fields of application cover all the sectors of the agroindustry, food packaging, winemaking and oil pro-duction industries.
|
|
Compact and Economical
CHEM-FEED® Metering Pumps are suitable for a variety of water and wastewater treatment applications. CHEM-FEED pumps feature Blue-White's exclusive Heavy Duty Pump Head with, double ball inlet and outlet cartridge type ceramic check valves, constructed of tough PVDF. Each valve has two ceramic checks, and is double sealed with Viton and TFE/P o-rings. The double ball valve design provides enhanced priming, and is exceptional for purging air and gas. Several models are offered in a wide range of output capabilities, voltage options and material variations. In addition, CHEM-FEED pumps can be customized for volume purchasers with purchase order contracts.
|
|
Completely different and a lot better
The Albin Pump AD is designed for a large capacity and long service life. Compared to traditional AODD pumps, it offers 70% lower pulsation, higher power, noise reduction and 3-5 times longer operation time between service intervals. The compact outer measurements and capability to install the pump upside down, sideways or vertically means flexibility during installation and set up. It is designed so that all vital parts are easily accessible without having to remove the pump from the pipe system, greatly minimizing downtime. All these improvements result in lower operational costs, reduced cost for spare parts and improved overall economy.
|
|
|
|
|
|
The CARBUSET® hand pump is a diaphragm pump, actioned by a lever. It is made of a tecno-polymer, granting guarantee of maximum resistance to atmospheric agents and to mechanical stress, wich may be exerted on it. Furthermore it has a high chemical compatibility with most used liquids. All metal parts are made of stainless steel. Main feature of the pump is reversibility of pumping direction, obtained by simply reversing suction and feed pipes. Option of the direct connection is aviable, allowing quick and easy fastening to most used drums, containers and tanks (2” thread Gas or M 64x4).
Thanks to its flexibility the CARBUSET® hand pump may be used in various sectors: iron works, garages, in the building industry for supply of machine tools, in agriculture, means of transport and in all situations where a pouring of liquid is necessary. It may be used in the nautical sector as bilge pump on small boats. The pump is suitable for pouring of petrol, gas oil, unleaded petrol, mineral and synthetic oil and liquids with suspended matter. A model of CARBUSET® hand pump is suitable for pouring of food-liquids, made of specific thecno-polymer and approved for foodstuffs.
|
|
SPECIFICATIONS
Pump Body: Glass Filled Polypropylene
Elastomers: Diaphragm made of Santoprene* Valves made of Viton
Hardware: 316 Stainless Steel
Pump Design: Four-Chamber Diaphragm
Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)
Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread
Motor: Permanent Magnet with Thermal Overload Protection
Shipping Weight: 7 lb (3.2 kg) approx. (12/24 V models)
Duty Cycle: Continuous at 40 psi (2.8 bar) and130°F (54.4°C) ambient temperature
Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)
Viscosity: 250 cP maximum
|
|
SPECIFICATIONS
- Pump Body: Glass Filled Polypropylene
- Elastomers: Diaphragm made of Santoprene* Valves made of Viton
- Hardware: 316 Stainless Steel
- Pump Design: Four-Chamber Diaphragm
- Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)
- Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread
- Motor: Permanent Magnet with Thermal Overload Protection
- Shipping Weight: 5.5 lb (2.5 kg) approx. (12/24 V models)
- Duty Cycle: Continuous at 15 psi (1 bar) and 70°F (21°C) ambient temperature
- Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)
- Viscosity: 250 cP maximum
Features::
• Self Priming.
• Can run dry without damage.
• Flow to 4GPM/15LPM.
• Thermal Overload Protected Motor.
• Snap-in 1/2" Dia. Port Adapters.
• Easy Installation.
• Low Amp Draw.
• Quiet Running
|
|
Diaphragm pump for liquid.
Model : 5013 DC12V Max flow rate 180 ml/min
5014 DC24V 190 ml/min
7038 DC24V 600 ml/min
7039 DC24V 0.32--110ml/min
Wetted parts : FKM (Option :EPDM, PTFE, FFKM)
PFA
Motor type : Coreless motor
Brushless motor
Feature
* High pressure
* High Chemical resistance
* No cavitation problems
* Low Acoustic noise
* Self priming
Application
* Fuel cell
* Ink jet Printr
* Washing machine
* Cooling system
|
|
ILMVAC diaphragm pumps are available:
- with different materials for chemical or physical processes
- with regulated or unregulated vacuum
- with different pumping speeds and final pressures
Advantages:
- compact and space saving design
- quiet running
- long lifetime
- very easy to service
- low operating costs
Range of applications:
- for dry, oil-free applications in the rough and medium-high vacuum range
|
|
|
Welcome to the newest Line of rugged Dia-Vac® Pumps! The High Performance double head Dia-Vac® pump will provide greater response in the most demanding applications!!! These durable pumps are available with General purpose, TEFC, Air Driven, Explosion proof UL/CSA Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts are available with aluminum or 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 0-84 LPM, 0-60 PSIG. You can count on the new high performance Dia-Vac to pass you gas with confidence!!
|
|
Completely different and a lot better
The Albin Pump AD is designed for a large capacity and long service life. Compared to traditional AODD pumps, it offers 70% lower pulsation, higher power, noise reduction and 3%u20135 times longer operation time between service intervals. The compact outer measurements and capability to install the pump upside down, sideways or vertically means flexibility during installation and set up. What%u2019s more, it is designed so that all vital parts are easily accessible without having to remove the pump from the pipe system, greatly minimizing downtime. All these improvements result in lower operational costs, reduced cost for spare parts and improved overall economy.
|
|
These balanced series of compressed air driven, double diaphragm pumps consists of two series: Verderair VA all purpose, multi-functional diaphragm pumps and Almatec diaphragm pumps for advanced/difficult applications. Both non metallic and metallic versions are available.
Advantages and characteristics: Simple installation; Maintenance friendly; Easy to operate; Self-priming when dry; No air lubrication needed; Sanitary, Ultra-pure and high pressure versions.
|
|
Almatec is one of the world’s leading brands of pneumatic diaphragm pumps. The first pumps were delivered in 1984. The technology is based on decades of experience in the pump sector. Numerous trend-setting developments resulted and the product range diversified to provide solutions to a whole variety of problems.
Since the company was founded, it has produced and delivered over 100,000 pumps.
Models
Verderair offers with the Almatec-series two main ranges of pumps; for standard, and for specific applications.
Standard applications
Pumps for the ‘normal’ applications are extremely suited for pumping all kinds of chemicals, slurries, coatings, paints, solvents, acids, glues, resins and powders.
The pumps are available in several types of plastics (PP, PE, PTFE) but also in stainless steel. Capacities are up to 800 l/min.
|
|
|
|
|
|
Verder has chosen a wide variety in materials to offer solutions for the complete industry. We make a difference between housings in non-metallics and metallics.
Verderair are highly engineered diaphragm pumps, delivering a smooth, reliable flow at all circumstances. The new air valves design guarantees a perfect, non-stalling operation, even at low pressure and does not need any lubrication. Thanks to their unique design, they are able to handle very abrasive and / or viscous products.
The Verderair will run dry indefinitely without damage. Verder has selected those materials, which offer the best combination of benefits to the end user. The used wetted pump part materials are Acetal, Polypropylene, Kynar, Aluminium, Cast Iron and Stainless Steel. For ball and /or diaphragm, VERDER selected PTFE, Hytrel, Santoprene, Viton, BUNA-N, SS and Acetal.
NEW - Atex: Verderair offers now pumps in a conductive polypropylene housing. With this unique material you can benefit from the polypropylene-advantages in an Atex environment.
The flow range is from 0.1 up to 1,060 l/min and pressures up to 8 bar (or 16 bar for high-pressure models).
|
|
The double diaphragm system increases safety when sampling expensive or extremely hazardous gases. Should the primary diaphragm fail, the other diaphragm keeps the sample flow intact. The 1/8" NPT port connection allows the user to add a leak detection system and alarm. The detection system monitors the diaphragm for failure analysis and assures system integrity until maintenance can be performed.
Single Head Double Diaphragm Sampling Pump (R221-FT-AA1-D shown here)
|
|
TYPICAL APPLICATIONS
DDP 3/4 IN.
The DDP Series is a high pressure, air-driven diaphragm pump, ideal for fluid transfer. They are corrosion-resistant, self-priming, self-cleaning, portable and inherently exlosion proof.
FEATURES
Pump Body: Black DuPont Teflon coated aluminum
Diaphragms: Teflon
Ball Check Valves: Delrin or stainless steel
Wetted Components: Stainless steel
|
|
High pressure diaphragm pump units are used for the zero-leakage handling of hazardous, toxic and difficult media. State-of-the-art design features ensure high operating safety, economy and availability. They are characterised by their space-saving construction and flexible drive variants.
- Pressure max: 350 bar
- Capacity max: 850 l/min at 120 bar
250 l/min at 350 bar
- Power: 250 kW
- Weight: 10 t
|
|
ALMATEC's high-pressure diaphragm pumps have been specially developed for charging filter presses with chemical wastes and special sludge.
With a driving pressure of max. 7 bar, the pumps of series AH build up a delivery pressure of 16 bar on account of the internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h (AH 15), 10 m³/h (AH 25) and 20 m³/h (AH 40).
All housing parts in contact with the product are made of PE UHMW. This polymer material is seven times more resistant to abrasion than PP. PE is also more resistant to wear than cast iron, aluminium and even steel.
|
|
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
The Micro Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. Maximum performance range: 0-13 LPM, 0-28”Hg, and 0-30 PSIG.
Double Head Diaphragm Sampling Pump (B162-FP-AA1 shown here)
|
|
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
JABSCO'S PUREFLO 4-piston diaphragm pump is designed to be used in pharmaceutical, biotech, food or cosmetic applications. The design complies with the stringent requirements of these industries.
The pump and controls are mounted in a stainless steel cabinet. The system can be cleaned easily and the simple construction allows safe and easy use.
Typical Examples:
Solutions containing proteins; Suspension of cells
Bacteria, yeast, fungi, mammalian cells
Suspensions containing viruses
Filtration, chromatography
Solutions or suspensions of polymers
Feed pump for centrifuges and separators
Feed pump for filter systems
Ingredients for food and/or cosmetics
|
|
The DVP is a membrane pneumatic pump high specifications of a 1:1 report/ratio developed for the direct power supply of the paint guns and
liquid product.
This concept guarantees a constant direct food and virtually without pulsations of the guns by avoiding the cost and the complications of a regulator of fluid or a clearing house.
Range DVP includes pumps alone, assembled pumps and offers
complete "ready with employment" matched with guns of high fame, DeVilbiss Advance or FLG5. Pump DVP is ideal for a use with ALL the TYPES of technologies of gun, conventional, Trans-Tech©, HVLP,
LVLP or electrostatics.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
The ProMinent® Duodos pumps are air operated diaphragm pumps. Since they are pneumatically operated the pumps require no electric components. The pump is dry-proof and self-priming. The pump feed rate can be adjusted by changing the pressure in the air supply. The pumps feed up to approx. 6 700 l/h media to a feed lift of 70 m.
Advantage
* Self-priming
* Dry-proof
* High Suction capacity
* No electric components
* No pressure relief valves required
Application Areas
Feed of abrasive, viscous, highly sensitive and gaseous media.
|
|
Features
- 2 chamber dual diaphragm
- Positive displacement
- On demand operation
- Chemical resistant polypropylene body
- 30 to 60 PSI (2.1 - 4.1 bar)
SHURflo's 166 Air Operated Demand Pumps employ a dual diaphragm design, with a patented fast action switching mechanism allowing for consistent flow and pressure. They are built for the toughest pumping applications and are available in a variety of elastomers that allow them to be compatible with mild caustic or acidic fluids. Ideal for chemical transfer, injection and spraying.
|
|
|
|
|
|
JESSBERGER air operated diaphragm pumps are suitable for nearly all applications. They can also pump media with high viscosities - also with particles or at abrasiveness.
Pumps can be supplied in Polypropylene, PVDF, Aluminium or Stainless steel. Manufactured sizes are available from 1/4" (5 l/min) up to 3" (850 l/min; both at 7 bar operating pressure.)
The advantages of an air operated diaphragm pump are:
- Can be used with non-lubricated air
- Also suitable for very humid environments
- Can be used in hazardous areas or for flammable media
- Also suitable for very aggressive or viscous media
- Flow rate and delivery head can be adjusted over air pressure
- After manifolds have been splitted two media can be pumped
- Different connections at suction and discharge side
- Dry running possible
- No electrical connection neccessary
- Dry self priming
- Easy change of spare parts and simple maintenance
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
|
|
