|
|
Automotive Cleaning and Recycling;Chemical Transfer and dispensing;Bag-In-Box chemicalsParts Washers ;Car Wash Systems;
Features:
• Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
• Robust Design with durable integral mounting
• Patented Shuttle Valve, eliminates stalling
• Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
• Corrosion Resistant materials capable of handling a wide range of chemicals
• Sanitary design with insert molded diaphragm (Santroprene only)
• Leak Resistant radial seals, no critical o-ring sealsQuiet Operation with large exhaust muffler
• Ease of Installation with all quick disconnect ports
|
|
|
Standard Duty Metallic Pumps are ideally suited for intermittent/on-demand, portable moderately abrasive fluids and suspended solids. Standard duty metallic pumps are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
|
|
Iwaki America’s FF Series pumps are economical solutions for low to medium temperature liquid applications (5 to 100°C). PTFE bellows and liquid end share the same proven design and manufacturing quality as the rest of the F Series family, ensuring high purity and long service life. All metal parts are fully encapsulated.
The FF-10/20CT2 has a PVC housing coated with fluoroplastic, suitable for liquids up to 50°C; a fluoroplastic encapsulated housing allows the FF-10/20BT2 to pump fluids up to 100°C.
Integral PFA tube connections mean there are no crevices or seams where particles can accumulate. A wide variety of fittings can be easily attached.
|
|
Whether your application requires high pressure or high temperature, the FW-H universal temperature pump will meet your needs! High purity and exceptional performance are central to the design mission of these pumps - in fact, the pumps are manufactured in a class 10,000 clean room environment. The PTFE bellows and PFA valves and tubing are welded, ensuring the greatest possible resistance to contamination.
Temperature range of 10-180°C accomodates almost any application.
Internal bellows design allows for higher pressure ratings by eliminating the failure points of traditional flat diaphragms and extending the pump’s service life.
|
|
The bellows pump is a pneumatic, self-priming pump. The fluid is pumped between the two chambers, airside and liquidside. This pump is adact for to transfer of ultrapure acids and solvents used in the semiconductor industry.
Their pumping frequency is much lower than an equivalent diaphragm pump and results in an extended life. Due to this low frequency and amplitude of the bellows pump, we guarantee a lower level of particle contamination. All PFD pump wetted components are manufactured with TEFLON® (PFA HP, PTFE and FEP). All other components are manufactured with high technology materials; e.g. PVDF and PEEK.
The use of material chemically inactive allows no ionic contamination. This pump is assembled in cleanroom.
Flow rate: 20 l/min
Max. suction head: 3,5 m
Max. air pressure: 5 bar
Max. back pressure: 4 bar
Max. air consuption: 13,5 m^3/h
Max. air connection: 4 mm I.D.
Weight: 4 kg
|
|
|
|
|
|
Iwaki America’s FS is a compact, all-temperature rated, low-cost, air-driven, bellows pump series designed for the semiconductor industry, chemical delivery or recirculation. This pump handles high temperature nitride etch and piranha etch applications with ease. FS features intelligent drive technology and leak sensing, with a significant cost savings over previous models, and a 2-year warranty.
Iwaki America’s FS is rated for liquid temperatures ranging from 5° to 180°C with discharge pressures up to 73 psi, making it the perfect pump for wet process tools, cleaning and chemical feed applications. Utilizing stroke rates up to 240 spm, FS is able to produce up to 50% higher flow rates in a significantly smaller space.
FS has a contamination-free design; all liquid contact parts are made of PTFE/PFA. The anti-torsion air chamber design eliminates the need for retorquing connecting rods. The intelligent sensor drive system of Iwaki America’s FS design uses proximity switches and an external solenoid valve allowing the pump operation to be easily controlled and monitored
|
|
Serie FS
Pneumatic driven bellows pumps
High speed strokes
As a result of reducing size, weight and costs the stroke rate could be increased up to 240 spm. Additionally the occuring pulsation could be minimised. Depending on the pump type the stroke rate differs.
Contamination free design
All liquid end prats are made of fluoro resin. The pump is so designed that no metal portion is exposed. Even the exterior is coated with fluor resin. The use of a shaft seal (patent pending) has the effect of a remarkable decrease of particulate emission.
|
|
|
Standard Duty Metallic Pumps are ideally suited for intermittent/on-demand, portable moderately abrasive fluids and suspended solids. Standard duty metallic pumps are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
|
|
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates from 4-8 litres/min (1-2.1 US gallons/min)
Features::
• Handles Water-like and Viscous Liquids Up to 250 cP
• Chemical-resistant polypropylene pump head for long life
• Latest techhnology internal check-valves for reliable self-priming
• Choice of elastomers for maximum chemical compatibility
• Internal bypass for excellent performance range
• Optional pressure-switch control to run the pump only as needed
• Available with long running heavy duty motor with built-in thermal overload
• Available with commercial-duty DC monitor for continuous operation
|
|
|
diaphragm pumps, vaccum pumps, flussigkeitspumpen diaphragm pumps, diaphragm pump, flussigkeitspumpe, umwalzpumpen, umwalzpumpe, piston diaphragm-pump, piston diaphragm-pump email send vaccum pumps, vaccum pump, miniature-pump, miniature-pump, micro-pump, micro-pump vaccum pumps, diaphragm pumps vaccum pump, diaphragm pump, flussigkeitspumpe diaphragm pumps, vacuum pumps, liquid pump, oem pump, gas pump diaphragm pump, vacuum pump, liquid pump, micro pump, miniature pump
|
|
Self-priming diaphragm pump with 110-240v AC electric motors. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi)
Features:
• Handles Water-like and Views Liquids Up to 250 cP
• Chemical-resistant polypropylene pump head for long life
• Latest techhnology internal check-valves for reliable self-priming
• Choice of elastomers for maximum chemical compatibility
• Internal bypass for excellent performance range
• Optional pressure-switch control to run the pump only as needed
• Available with long running heavy duty motor with built-in thermal overload
• Available with commercial-duty DC monitor for continuous operation
|
|
Features:
* Self priming up to 8 vertical feet (2.4m)
* 6' power cord
* Chemical resistant materials
* Can run dry without damage
SHURflo internal bypass pumps are the answer to applications where an automatic demand switch is not required. Pumps with bypass will continue to run at high pressure. Ideal for intermittent and continuous duty applications. They can be mounted in any position, are compact, and are designed for easy maintenance.
|
|
DB5 Series (Exhaust & Suction)
Silent Air Pump Built-in Type
* Extremely Quiet
* Long Life
* Low Power Consumption
* Low Vibration
* Oil-less, Contamination-free exhaust air
* C.E. Compliant and U.L. listed Models
Ideal for: Medical /Environmental /Consumer Industrial
*Air Surface/ Air Beds/ Air Mattress
*Nebulizer
*Aspirator
*Automatic/ Robotistic Equipment
*Air Sampling
*Gas Analyzer
*Ozone Generator
*Massage Chair
|
|
Air pumps APN-W series
The APN-W series are gas-liquid transfer pumps. The use of a special diaphragm allows the pump to transfer both air and liquid. The miniaturized & lightened body offers optimum sizing for various equipment such as analyzers, in which compactness is always a key requirement.
- Design for transferring both gas and liquid ensures long life.
- Ideal for waste liquid collection thanks to the ability to handle entrained gas.
- Ultra-compact and lightweight
- High corrosion resistance
- Low noise design
- Oil-free design
- Capable of self-priming under dry condition.
|
|
Hoffman condensate units are used to return condensate to the boiler. Applications include residential, commercial, institutional, and industrial
steam heating, and industrial processing; dry cleaning plants, chemical refineries, wood pulp paper processing, textile mills, and manufacturing facilities.
|
|
|
|
|
|
Presenting condensate recovery pumps. Offering products suitable for use on high-lift closed recovery applications and applications involving mechanical pumps where the use of electric power is not possible. Equipment for recovering and transporting condensate collected by suction or by the flow of gravity.
Operating Pressure Range: Vacuum - 200 psig
Operating Temperature Range: 0 - 365 °F
A broad line-up of optimized condensate recovery equipment, to suit each condensate recovery application and capacity. Included are ejector type pumps for recovery of high temperature condensate, mechanical pumps that use no electricity (PowerTrap), and vacuum pumps suitable for the recovery of low pressure, low temperature condensate.
Comprehensive consulting services for optimized condensate recovery systems, including onsite surveys, measures to ensure water quality, system design, pipeline construction, and confirmation of results.
Application Areas
Recovers high temperature condensate and delivers it to another location.
Collects, removes and transports condensate that has accumulated inside the equipment.
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
The DOSTEC dosing pumps are heavy duty, high precision diaphragm pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
In a class by itself - the LK is a motor driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and maximum pressure of 225 PSI (1.5 MPa).
This expanded flow range makes the LK a perfect compliment to the E-Class Metering Pump Line.
The LK Series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
|
|
FEATURES
Simple Design
Easy to Maintain
Intrinsic Safety of Pneumatic Operation
Stroke Length and Stroke Rate Adjustment
High Flow Turndown
Corrosion Resistant Construction
All 316 SS or TFE Wetted Parts
Ease of Installation
Recommended for discharge pressures below 120 PSI
|
|
Dry and Oil-Free!
The Ideal Backing Pump for Pfeiffer Vacuum Turbopumps.
Dry and oil-free diaphragm pumps with a pumping speed of 6 to 160 l/min. They are ideally suitable for being used as a backing pump for Pfeiffer Vacuum turbopumps and for integration into compact systems.
|
|
Features :
- Pressures up to 150 PSI (10.3 bar)
- Self priming up to 8 vertical feet (2.4 m)
- Chemical resistant materials
- Designed for heavy duty spraying and fluid transfer applications
- Can run dry without damage
- Built in check valve
The 8000 Series diaphragm pump is SHURflo's most widely used Industrial pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming. Up to 1.8 GPM (6.8 l/min).
|
|
HDF (SA) Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line size solids requirements. HDF feature:
* All HDF pumps are configured in bottom discharge porting arrangements
* Thick wall constructed of Sand Casted Aluminum, Cast Iron and Stainless Steel w/elastomer
* TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves
* Enhanced with an extended wear package
* Hinged flap check valves
* Solids range +1" (25mm) to 3" (76mm)
* Dry primes up to 24 feet of water
|
|
|
For continual delivery of low to medium viscosity dispersion adhesives under electronic material control, double-membrane diaphragm pumps are ideal.
|
|
|
|
|
|
Monitored RuppGUARD® Serie pumps provide safer handling of aggressive or hazardous liquids. RuppGUARD chambers filled with neutral or compatible fluid prevent leakage into the environment in case of diaphragm breach. No pumped fluid enters the air valve or exhaust and pressurized air cannot enter the fluid pumped. Mechanical, visual & electronic leak detection available for local or remote alert.
Pipe Size: 1" / 25mm
Displacement Per Stroke: .09 gal / .34 ltr
Max. Flow per Minute: 42 gal / 159 ltr
Max. Solids Handling: .25" / 6mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: .30 gal / 1.14 ltr
Max. Flow per Minute: 90 gal / 340 ltr
Max. Solids Handling: .25" / 6mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
Spill Prevention.
Product range from:
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: .36 gal / 1.36 ltr
Max. Flow per Minute: 80 gal / 340 ltr
Max. Solids Handling: .47" / 12mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .9 gal / 3.41 ltr
Max. Flow per Minute: 238 gal / 901 ltr
Max. Solids Handling: .71" / 18mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
|
|
Capable of transferring clean gas
The pumps in this series are of the diaphragm type and excel in airtightness. The pump keeps the handled gas clean while compressing, suctioning, and transferring. Therefore, this pump is ideal for gas analysis and for suction and exhaust of special gas.
Wide variety of models
All pump models in this series are available as standardized single or two-heads in parallel or series. This wide variety of models, combined with various material compositions, makes it possible to handle any type of gas.
Superior durability
The pump uses a new type of diaphragm that can withstand continuous operation over a long time. The other parts used in the pump also have greatly improved durability over conventional models.
|
|
Features::
• Compact Design Measuring 6.4" (162 mm) in Length
• Fully Automatic Demand Pump
• Self-priming and Can Operate Dry Without Damage
• Built-in Thermal Protector
• Sealed Pressure Switch and Motor
• Flow Rates to 1.0 GPM (3.8 L/min.) and Operating Pressures to 25 PSI (1.7 bar)
• Compact automatic demand pump.
• Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
• Self-prlming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.
|
|
|
|
