|
|
Slurry removal is an essential part of day-to-day
operations in a wide range of industries, such as
mining, ore dressing, sand contracting, ash handling
and steel milling.
The applications in these industries make heavy
demands on the slurry pumps, particularly in terms of
the costs incurred when it comes to wear and tear,
repairs and maintenance.
In this series of pumps the wet end, indeed all wear
parts, are made of hardened high-chrome cast iron,
which provides complete wear protection. The highchrome
impeller, incorporates a swept-back design for
sustained high efficiency and clog-free performance in
the most severe applications.
The drive unit can be easily detached from the wet
end for fast access to wear parts. And there is no
need to replace the entire wet end because the split
casing design enables the volute lining to be easily
accessed and replaced.
Flygt is the only manufacturer that offers its customers
a total solution for slurry handling. The pumps can be
supplied with an agitator and/or a mixer for a cleaner
sump. Optional internal cooling allows pumping down
to low levels, avoiding sediment build-up – we call it
Clean Sump Technology.
Slurry pumps have capacities of up to 350 l/s and
pump heads up to 100 metres. |
|
Amarex N
Our pumps and valves handle municipal and industrial waste water, keep buildings and property well drained, and serve in sundry pumped drainage systems.
Wherever and whenever waste water has to be handled, look to us for first-class solutions: pumps, valves, automation, drives and systems - all in application-geared designs. Impressive availability and economic efficiency for every application.
|
|
All of us need clean water
All the water man uses is returned to the natural water cycle and so rivers, lakes and ground water are threatened with pollution.
To avoid this is the task of sewage treatment plants. This task is difficult but it can be solved. In order to do this, they are assisted by WILO submersible motor pumps.
Competence in Sewage Plant Technique
We have been manufacturing submersible motor pumps for water treatment and sewage purification for purification for several decades.
Installed in sewage plants, storm water retaining basins or pumping stations, WILO pumps contribute worldwide help to solve sewage problems thoroughly.
- Pumping unscreened sewage
- Evacuation of grit collectors
- Pumping to digesters and thickeners
- Aeration of activated sludge and its circulation
- Circulation of hot sludge and digested sludge
- Pumping return sludge
- Skimming off excess sludge
- Pumping out ditches |
|
Characteristics
- Vertical.
- Single Suction.
- Single Stage.
- Submersible Motor.
Applications
- Water.
- Rain Water.
- Combined Sewage.
- Sea Water.
- Cooling Water.
- Sludge. |
|
| ... products without technical information |
| |
Aqualis 2
Air-source reversible heat pump for heating and cooling of individual homes and small businesses. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators. May be installed in new or renovated housing and buildings to replace or be used in conjuction with a gas or oil-fired boiler. Designed as standard for outdoor installation without any special weather protection.
Eight models available
Heating capacity: 6 to 19 kW
Cooling capacity: 5 to 18 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- Scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Low-speed propeller fan,
- Hydraulic module with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-410A refrigerant. |
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional. |
|
| ... products without technical information |
| |
Singled stage - enclosed mixed flow type impeller for pumping wastewater and other liquids with soft solids.
Specifications:
Capacities to 23,000 GPM (5223 m 3 /h)
Heads to 85 feet (26 m)
Solids to 9 inches (229 mm)
Design Features:
Back Pull-Out
2 Vane, Non-Clog Impeller
Renewable Wear Parts
Maximum Sealing Flexibility
Patented Equiseal Available
Tapered Shaft Design
CW & CCW Rotations
5 Discharge Positions
Patented Tri-Base
External Impeller Adjustment |
|
| The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application. |
|
Dynex checkball piston pumps are available for use with various water-based fluids including water glycol. The pumps operate at maximum pressures from 10 000 psi (700 bar) to 15 000 psi (1040 bar).
These pumps are assembled with corrosion resistant parts, are treated for extra protection, ready for customer application of the final protective coating.
In the checkball design, internal bearing lubrication is provided by the pumped fluid. This prevents cross-contamination which may occur in other pump designs requiring a secondary fluid for lubrication. It also eliminates the cost of a lubrication circuit or regular maintenance of a lubricating oil.
Dynex pumps are ideal for wellhead safety control systems, subsea applications, industrial equipment including hydroform presses, and other applications requiring fire-resistant and environment-friendly fluids.
Systems currently using triplex and plunger design pumps can especially benefit from Dynex pumps, which are less than half the size, weight and cost. |
|
| The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application. |
|
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
Superior sealing
Double-row ball types & ball/roller types
OEM/ODM drawings or samples accepted
Primary Competitive Advantages:
Price
Quality Approvals
Main Export Markets:
Worldwide |
|
|
|
