Digital I/O

Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile monitoring and ...

- Supports Sink (Wet Contact) / Counter input type - Rated Input : >5mA @ 12 VDC - Input Filter : Programmable, Default 3ms - Current : >10mA @ 24 VDC - Pulse Input Frequency : 150Hz - Over Voltage Protection : ...

- Supports open collector (Sink) output type - Rated voltage : 8 ~ 30 VDC - Rated current : 200 mA (max load) - Over voltage protection : +40 VDC - Pulse output frequency : 1 KHz - Opto-isolator response time : ...

Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement in installation space and wiring work. • Industrial standard e-CON connectors require ...

• Analogue Input Module • Encoder Input Module • Input Module • Digital Input Output Module • Strain gauge Input Module The Orbit Network can do more than just interface to Solartron digital displacement transducers (Digital ...

Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O point and rugged environmental ratings for reliable ...

Red Lion's rugged E3 I/O™ Ethernet-enabled I/O module platform provides powerful networking and reliable remote monitoring and control capabilities for harsh industrial environments. With all-metal housing, wide environmental specifications ...

Pulses delivered independently to eight isolated binary inputs are counted by the SLI-8 multi-counter module. It is 24bit long and can be cleared or read by the operator at any time. The LEDs signaling the occurrence of high states on ...

The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented override operation. Types - ...

The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition to the L-Series. ...

Module with 20 digital inputs to read consumption using pulses from any type of meter (electricity, water, gas, etc.) or to detect the status (ON/OFF) of any device or sensor associated with a control system (people, units, protection, ...

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...

The A/D inputs plug-in card for control/measurement of the OMR 700 is fully isolated from the internal bus. The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements ...

Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus. The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase ...

Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input 4x analogie output, 0…2/5/10/±10 ...

The I/O module UG 9460 has 8 digital 24V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.

Binary input/output (I/O) terminal with IEC 61850 interface Easy to use binary I/O extension ISIO 200 is a simple and versatile binary I/O terminal with IEC 61850 interface. For communicating with CMC test sets and real-time message ...

Product Feature: Flexible protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 I/O ...

ODOT CN-8032 Profinet Network Adapter The CN-8032 Profinet network adapter supports standard Profinet IO Device Communication. The adapter supports MRP media redundancy, and it could realize ring network redundancy. And it supports ...

The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules. Hardware Specification System ...

KEB’s C6 Remote I/O system offers various options for connecting process signals to an EtherCAT network. It is made up of a C6 Remote I/O bus coupler and additional I/O modules. The C6 Remote I/O bus coupler converts the physical transfer ...

OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN) from the CNX116 base. It is a flexible I/O system that can be applied as a local expansion I/O or as remote I/O distributed over hundreds of meters. The CNX116 ...

SmartMod+ expandable I/O supporting Modbus TCP/IP communication protocol. Modbus TCP/IP -Traditional slice type I/O -Connects to Ethernet via RJ45 to any XL-Series OCS or other OCS/RCS family controller -DIN rail mountable ...

SmartBlock a remote I/O solution for any CAN equipped Horner OCS. -Analogue, Digital and Mixed input/output options -5-pin double CsCAN plug -Removable Field Wiring Terminals -Easy-to-read, separate I/O connectors ...

2 Universal analog input channels Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel 2 ...

1 Analog input channel measuring half and full bridge, IEPE-sensor, voltage, current, quarter bridge with completion terminal 1 Analog output channel voltage (±10 V) or current (0 to 20 mA), 100 kHz update rate High-accuracy digitization 19-bit ...

2 galvanic isolatesd Analog input channels strain gauge and inductive half and full bridges, LVDT, RVDT quarter bridge with completion terminal DC and carrier frequency (CF) principle 2.5 and 5 VDC excitation, 2.5 and 5 VDCeff excitation ...

The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance and an extensive dependability ...

Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic panels using standard Modbus RTU protocols. The sensor connector type ...

The ADIO series remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILD can exchange signals from secondary ...

The Z-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through the RS485 serial interface. ...

The Z-D-OUT (hw.1with micro USB port on the front panel) is used to drive N.5 SPST relays from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The ...

Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency 5 kHz and settable forwards or ...

@ctiveIO I/O modules: smart intelligence for your system Our @ctiveIO I/O modules are as different as your individual automation solutions. Two sub-modules are combined in one module respectively in this smart system. You can thus ...

@ctiveIO I/O modules: smart intelligence for your system Our @ctiveIO I/O modules are as different as your individual automation solutions. Two sub-modules are combined in one module respectively in this smart system. You can thus ...

@ctiveIO I/O modules: smart intelligence for your system Our @ctiveIO I/O modules are as different as your individual automation solutions. Two sub-modules are combined in one module respectively in this smart system. You can thus ...

Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used anywhere where ...

Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox fulfils the safety ...

The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS and J1939. The ESX.3ios ...

With the ESX.mbc, we present a new CAN-J1939 module especially for the agricultural and construction machine sector, to control electric motors and actuators in a performance range of up to 200 W. It provides four fast PWM half bridges ...

Digital I/O module • 8 digital I/Os • Input 24 V, output 24 V / 0.5 A • Power supply via InRailBus or individual supply via COMBICON connector EtherCAT Interface •100BASE-TX EtherCAT Interfaces, compatible with ...

CANopen module with 8 digital I/Os • Inputs 24 V • Outputs 24 V/1 A • Input/output programmable CANopen According to CiA® Standards • CiA 301 CANopen application layer • CiA 401 generic I/O-modules 32 Bit ...

CompactPCI® Interface with Digital Inputs and Outputs • 16 inputs 24 V • 16 outputs 24 V, 250 mA • All inputs and outputs electrically isolated Outputs with Short Circuit and Overload Protection • Error detection ...