|
|
LDSS - LARGE DIGITAL DISPLAY FOR SERIAL INPUTS
Ideal for Production line Monitoring, Temperature Zones Monitoring on the Plant Floor, Tank level Monitoring, Operation Timing, Storage/Process Temperature Monitoring...etc...,
The LDSS is the perfect solution to display a value that is currently stored in a register and displaying it on the plant floor.It is capable of accepting RS232 or RS485 as the input and displaying it as a remote or slave display.
- Exist in 2 versions, with display heights of 2.25" readable to 130' or the 4" readable to 180'.
- Input: accepts serial ASCII data from an host device
- Selectable for RS485 or RS232 serial interface
- Display capability: full numeric, limited alphabetical (missing M,W & X)
- Decimal point transmetted with the value
- Display selections: secondary display capability, Display scroll option
Supply a complete monitoring solution in combination with the Data Station Plus, the Modular Controller or one model of the G3 series
|
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A +Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
The new SI 3000 range of Controllers are specifically designed to operate with Solartron's extensive range measurement transducers, and/or third party transducers, such as pressure and temperature.
One of the main features is an intuitive menu-driven display, which can be programmed to display readings, set Limits/Alarms, Peak Hold, Track, or act as a Data Logger for inputs from one or two transducers
The SI 7500 is a multi axis metrology display that connects to a Solartron Metrology Orbit Network and accepts up to 16 Orbit Module inputs; such as Digital Probes, Linear Encoders and Analogue Input Modules. It features intuitive displays, helpful audio cues and user defined formulas. The SI 7500
also reports dynamic Min/Max measurements, provides SPC analysis from an integrated database and offers connectivity to PC's and other peripherals.
|
|
Digital indicators Type AN41-44
Fields:
Chemical and Petrochemical Industry, Food and Beverage Industry,
Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
Digital indicators Type AN 42
Fields:
Chemical and Petrochemical Industry, Food and Beverage Industry
Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
|
|
LED display
Type LED-0201/D025
Segment height: 25 mm
|
|
1/8 DIN Advanced Digital
This range consists of rotary pulse, timer interval and up-/down-counting pulse indicators. These indicators with digital input feature a clear and easy-to-use colour-change display and all have an IP66 housing. K3HB series consists of rotary pulse, timer interval and up-/down-counting pulse indicators. Extra functionality can be added using option boards (max. 3): sensor power supply/output (incl. communication and linear voltage output), relay/transistor output (incl. DeviceNet) and event input.
|
|
|
The VM500 vibration monitor offers incredible versatility and functionality in a small 1/8 DIN package, for an attractive price. It provides fully scalable 4-20 mA output for your control system, and also includes two form C relays for a variety of uses. The VM500 is available in dis-placement, velocity, acceleration and even temperature models for 10, 100, and 500 mV/g accelerometers and "J" type thermocouples. Options include RMS or Peak display, as well as a wide range of high pass and low pass filters to focus on frequencies of interest.
|
|
Digital-displays in a field-housing or switchboard-housing are easy to install on site and to increase the transparency and overview.
Characteristics:
- Easy installation because no supply is needed
- Adjusting scalable
- Digit free choose
- Automatic zeropoint and polarity compensation
- Different variations
|
|
MRR-841
- Digital Display / Converter
- Output: 0 to 5 Vdc
- Input: 0 to 999 Hz
MRR-900
- Digital Display / Converter
- Output: Digital Display; High & Low Alarms
- Input: 0 to 1 kHz
|
|
The FAGOR 8055i MC Turnkey Package is a pre-engineered CNC & Servo System Package.
Specifically designed as a low cost solution for upgrading or retrofitting small and mid-size Milling machines to a fully controllable very powerful CNC Milling machine.
Every Turnkey Package is built to your machine specifications, fully tested and ready for immediate integration to your machine upon arrival.
The CNC 8055i MC utilizes a Dual Operating System. The unique and very powerful operating system consists of 2 systems within 1 control.
Utilizing a 100% very easy to program Icon Key based conversational programming system or a Conventional ISO G-code programming system within the same control.
The Fagor “Icon Key” programming method greatly simplifies the programming process even compared to more conventional conversational systems. Graphic assist is utilized within all programming screens thus enabling “true” fill in the blank programming.
|
|
TFT COLOR LCD
HIGH CLARITY VIEW FROM ANY ANGLE
SOLID GRAPHICS
3D SIMULATION
DISTANCE TO GO
UL APPROVAL
- Radius / diameter display
- Mm / inch conversion
- Fine / coarse resolution
- Absolute / Incremental
- Axis preset / reset
- Display-off mode
- Angular axes
- 20 reference points
- Linear compensation
- Tool compensation
- Multi-point compensation
- (40 points per axis)
- Scaling factor
- Feedback pulse monitoring
- Software limits
- Hysteresis factor
- Machining axis rotation
- PC communication via USB adapter
- Auto shut-off after 30 minutes
|
|
LH51/52
Digital Readout Displays
Compact display with numerous functions for milling machines (LH51) and lathes (LH52).
* Selectable display resolution
* Selectable absolute/incremental display
* Linear error compensation
* Reset, preset and recall
* Centerline and bolt hole* calculations
* Datum point memory
* Power loss data memory
* Radius/Diameter selection
* Self-diagnostics
* Direct inch/metric conversion
* 9 Tool Offsets**
* *LH51 only
* **LH52 only
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
|
The DS-3000 Four-Channel LED Display is an integral device incorporating display, interface device and a controller combined in one. It allows users to connect up to four of our iLoad & iLoad Pro Series load cells and view individual and/or total loads in three different units: Kilograms, Pounds and Newtons.
|
|
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
|
|
|
|
The DM500x is a programmable digital panel meter which can be programmed by using the push-buttons. It's possible to select the type of input (voltage, current, thermocouple, thermoresistance, etc.), the ranges, the relationship between input variable and displayed value, the alarms, etc...
Programming is simple thanks to the keyboard with only three push-button and alphanumeric helping messages.
The frontal dimensions are only 48x96mm but the display is visible from far thanks to the optical filter and the size of the digits, 13,5mm for the main display (high efficiency orange) and 10mm for the secondary display (high efficiency green).The depth is 100mm only.
In addition to measuring and displaying functions, these instruments are also able to support up to 4 (four) alarm Set-points with respective open collector output(2 alarm Set-Points if relay output is requested). They also allow the retransmission of measure with analog (i.e. 4¸20mA) or digital output by RS232 or RS485.
There is a three levels' key that protects the safety of setting parameters and acquired data.
It was developed to satisfy the various requirement of regulation and control systems, thanks to the completeness of the offered function and the high number of available configurations.
SMT mounting, powerful microcontroller used, flexibility of use, easy programming are further characteristics.
|
|
|
When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs.
|
|
Digital Readout
A complete system consists of one or more Linear Encoders, commonly referred to as scales, and a Digital Readout.
The Linear Encoder monitors the machine travel and the Digital Readout (DRO) displays the distance moved or machine table position to the operator.
The axis display is large and clear and the keyboard is designed to be easy to use.
Many functions can be taken off the keyboard to support the work at the machine.
Depending on application you can choose between different versions of the readout.
|
|
A very powerful micro-controller manages and processes all the information [position, calculation, etc.] trasmitted by the transducers or entered by the user. Having such a highly evolved but user-friendly digital Readout means increasing the production performance of the machine on which it is installed considerably.
|
|
|
NAI offers a wide variety of industry leading angle position indicators and measurement instruments for the defense and aerospace markets. Its best-of-breed performance is delivered in a variety of accuracy and resolution grades, with various packaging options available. NAI also offers form, fit and function replacements for the obsolete DDC angle position indicator models AP-30610, AP-30611, AP-30710, AP-30711 and AP-30712.
|
|
|
The Acu-Rite 300S is a fully programmable 4 axes readout system, now available with a full color display. With the capability to store and create a library of programs the 300S is everything you need to create, edit and execute programs on your manual machine tool.
|
|
High Accuracy Lathe Packages
Fits Most Popular Lathes Up To 80
* Uncompromising accuracy and repeatablity X-axis display resolutions to 0.00002"
* Fits most popular lathes up to 80" between centers
* Display includes 9 tool offsets for increased productivity
* Optionally, a third scale can be installed on the compound for Z1 or Z2 measurements
* All brackets and hardware included for quick, easy installation
* Display: LH52-3 Scales: GB-A and SJ700
|
|
|
The Acu-Rite 300S is a fully programmable 4 axes readout system, now available with a full color display. With the capability to store and create a library of programs the 300S is everything you need to create, edit and execute programs on your manual machine tool.
|
|
| ... products without technical information |
| |
|
|
