Digital testers

... diagnostics unit enables a straightforward condition assessment of the cable system. The new HVA68TD is more than just a VLF tester. In addition to VLF testing & Tan Delta diagnostics capability, it allows to pre-locate ...

... LIFT-OFF: 500μm PROBES: φ14mm Freq of 60 KHz and φ8mm freq of 500 KHz each one RESOLUTION0.1~0.001%IACS Digital Conductivity Tester Sigma 2008B Working Freq. 60KHz and 500KHz, sine wave ...

●Optimization filter manner to keep the measuring accurate ●High Brightness backlight for clear reading ● Large measuring range, displacement up to 1.999 ●Analyzer of acceleration, velocity, displacement ●Three display modes Common mode display any

•Reproducible measurement of wear and scratching restistance •Fast and easy measurement of layer thickness •Comfortable operation •Suitable for hard material films, lacquers, plastic coatings etc. •For quality assurance and coating ...

The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated ...

• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. • Auto-hold and Auto-data storage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • ...

• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • Compact and Lightweight.

... power off function: The timer operates automatically about 10 minutes when the” Test Button Switch “are pressed to keep the tester power on. • 2mA measu ring current permits earth resistance tests without tripping ...

... Resistance Tester Used in peeling and tensile strength assessment. The H17 contains a test piece that clamps on both sides, moves at the same speed, and evaluates the resistance on the object. This adhesion and peeling ...

Disk-on-disk and ball-on-disk friction coefficients and abrasion can be measured with the H20. A disk or ball indenter is loaded onto the test piece and connected to a highly-sensitive straingauge. As the turntable rotates, the load is ...

... 100 is very easy to use for all employees of a research / production site. The test results are given through lights, digital indicator and buzzer, which can be programmed by the user. 4 thresholds are available: ...

... results clearly visible on the display. The small size makes it a hand-held tester and allows to obtain an accurate analysis of the battery condition at any time. BC Tester BT-01 is the ideal companion ...

BT-03 Tester is a professional tester with integrated printer for all 6/12V lead/acid batteries (traditional, Gel, MF, AGM ...) from 40 to 2000 CCA (SAE), and starting and charging electrical systems ...

... in a single test program. It is particularly suitable for implementation of functional test benches for equipments and electronic boards. The reduced footprint and the compliance with WCM criteria, enable the use of ...

... in many variants • for overpressure or vacuum • serial interface RS232 as standard • optionally including digital I/O interface

AC GROUNDING HiTESTER 3157 Protective Ground Tester Indispensable for Standards Certification Overview The Hioki 3157 is an AC ground bond tester designed for protection circuit testing of a wide ...

IMPULSE WINDING TESTER ST4030 Diagnose the Insulation Quality and Deterioration of Rotor Windings while in Assembled State via Response Waveform Quantification Overview The ST4030 is an impulse winding tester ...

... insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as ...

... Storage battery internal resistance tester, is also named stationary battery impedance tester. It is digital and multifunction test equipment which can quickly and accurately measure ...

SAT-AC Battery Conductance Tester is a multi-function and portable digital instrument to test lead acid stationary battery running condition and parameters quickly and precisely. It can display and record ...

SAT-12B Double Clamps Earth Tester is widely used in the fields of resistance testing for earth resistance of various equipments and buildings. It also can test the soil resistively and leakage current of earth systems ...

LCD voltage and continuity tester Model SEFRAM66 The new SEFRAM66 is an easy-to-use instrument. The SEFRAM66 has been designed, tested and approved according to the EN61243-3 standard. Designed with IP2X test ...

Digital Earth resistance tester Model MW9452D - Earth measurement with tods - Earth resistance 0 to 2000 ohms - Robust (dual material) case - Delivered with rods and cables

The Regmed CT-21 Crush Tester is designed to perform standard TAPPI fiberboard tests such as Flat Crush, Edge Crush, Ring Crush and Pin Adhesion. Details - The CT-21 Crush Tester is designed ...

... Sutherland Rub Tester was designed to determine the abrasion resistance of printed materials. The tester is a motor driven instrument that moves a weighted test strip over a printed specimen through Details The ...

... Ohm to 100 Ohms Leakage current and the current 1mA-40A of the neutral line Large-caliber 45mm×32mm precise measuring probe Digital measurement, automatic shift, simple to operate The jaws have double-layer insulation ...

1 mA test currrent for meg ohm range at rate voltage Large dual display with backlight Test hold function for easy operation Over range indication Low battery indication

... heated floor systems Tests insulation, resistance and continuity (Megohmmeter / Ohmmeter) Large LCD with dual display screen (digital readout with analog bar indication) Auto discharge Manual data memory and read functions ...