|
|
Our standard range has more than 160 references of DIN Rails.
It allows to answer any type of requirements :
- mini-rail 15x5,5
- symmetrical rail 35x7,5
- symmetrical rail 35x10
- symmetrical deep rail 35x15x1,5
- symmetrical reinforced deep rail 35x15x2,3
- asymmetrical rail 32
There exists :
several types of treatments : zinc bichromate or white zinc
several types of raw material : zinced steel, galvanised or stainless steel
several lengths : 1,2, or 3 meters 2 types of perforation
Also, we manufacture a wide range of C Rails and Uprights (2,5 thickness) in L,U,Z shape.
This range of rails and uprights is completed by several types of accessories : metal clips, nuts, mounting brackets, spacers and insulators. |
|
With Alurail, BOPLA has developed a modular Din rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in 8 standard lengths, are also available.
A spilt basic profile which facilitates PCB installation can also be supplied. In addition to the front panel, customerspecific industrial circuit boards can also be inserted into the basic profile as a front end elements. Individual design of the enclosure construction is made possible by the clipping on and screwing of different module types in various lengths onto the basic profile.
The anodised basic profiles and modules are equipped with integrated guide grooves for one or more circuit boards. If required by the customer, the basic and module profiles can be supplied in special lengths.
In addition to the professional fitting of the enclosure onto a mounting rail ( 35 mm ) acc. to DIN EN 60715 TH35 (prev. DIN EN 50022), the enclosure can also be fitted direct to the wall. The fitting element required for this purpose is available as part of the Alurail accessories programme. As a system supplier, in addition to the matching connector terminals BOPLA also offers customer-specific membrane keypads and all the necessary processing work at low cost and from a single source.
|
|
The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the auto motive industries.
Designed for easy snap-on assembly onto DIN-rails by integrated snap-on clip. These enclosures facilitate economical device assembly with optimal utilization of space. For the termination of the conductors of the cable 2 enclosure versions are availible:
- pluggable terminals for easy servicing and exchange (commercial pin headers on the pcb.
- screw terminals for a fixed termination of the conductors. For effective heat dissipation the LDG-S enclosure features a base part with integrated ventilation slots. Closed versions (without ventilation slot) are availible upon request.
Features:
2 installation widths: LDG-S2: 22.5 mm; LDG-S4: 45 mm.
Options for the termination of the conductors:
LDG-S2: 4 screw terminal blocks manufacturers with 4 terminals each or 4 pcb headers with 4 pin contacts each for connecting cable cnnectors with 4 pins.
LDG-S4: 8 screw terminal blocks with 4 terminals each or 8 pcb headers with 4 pin conacts each for connecting cable interconnectors with 4 pins.
Easy snap-on assembly on DIN-rails according to DIN EN 50 022
Easy assembly of the enclosure achieved by snap-in design of the two base part and the top part
Transparent housing cover with the option for a professional label
Customized colors and versions upon request |
|
OKW offers a comprehensive range of cases for DIN rail mounting. All types are extremely installation-friendly, for mounting components as well as for connection work!
Your advantages:
- Different connection options for commercial components such as terminals, PCB plug headers and front connectors manufacturers.
- Without/with integrated connection system.
- Without/with ventilation slots.
- Different sizes following DIN 43880, unit 1.
- Suitable for Din rails EN 60 715. |
|
EURONORD range is designed to house DIN-rail mounted terminal block manufacturers and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
CSD Series Switching Power supplies, in modular DIN case with Class 2 double isolation, 90…264Vac/100…350Vdc input.
Items with adjustable 5…15Vdc, adjustable 12…15Vdc, adjustable ±12…±15Vdc and 24Vdc output, 0.6A , 1A , 2.5A , 3A output currennt in 2 or 4 module-cases are available.
EMC compliant to Civil application standards; RoHS compliant; no grounding needed;
Short circuit, overload, over temperature, input / output overvoltage
protection. Designed for use with SELV and PELV circuitry. |
|
Convel DIN rail mounting supplier of power supplies are designed for quick and trouble-free installation onto 35mm profile Din rails.
With outputs ranging from 5V to 24V and maximum current capabilities of 100mA to 4A, these units are ideal for many instrumentation and sensor applications.
Every model in the range is provided with output current foldback limiting and is fully short-circuit protected.
Great attention has been taken to usability and safety.
Link selection allows the use of 115 or 230V supplies without derating. |
|
| MTM Power GmbH, the specialist of individual power supplies, has designed a new generation of Din rail psus, series HSA, for industrial application. As universal compact power supplies, they have an output power of 120 or 240 W. One of the major advantages is to increase to a maximum the readiness for operation of the system to be supplied even under difficult conditions. With dimensions of 50 x 130 x 130 mm (HSA120) and 80 x 130 x 130 mm (HSA240), they perfectly fit into professional cabinets only offering little space. The devices are available with output voltages of 12, 24, 36 and 48 VDC. They have a high efficiency of up to 89 %, are continuously short circuit protected and need no ground load. The output current is electronically limited in case of overload and the devices then change into constant current operation. Due to this characteristic curve and the reduction of the output voltage to 0 V at the same time, they are protected against short circuit damages and thus offer the possibility to supply loads with high inrush currents without switching-off or intermitting resp. |
|
| MTM Power GmbH, the specialist of individual power supplies suppliers, offers power supplies for DIN rail mounting with 15 to 75 W. These primary switched modules have been designed as universal compact power supplies with wide input ranges for worldwide applications in switching professional cabinets and allow an efficient, cost-saving solution for different tasks. They are vacuum encapsulated which allows the use under critical environmental conditions. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. MTM Power Din rail power supplies comply with the Low Voltage Directives as well as the up-to-date EN standards as regards CE conformity. All devices are short circuit protected, need no ground load and are available with various modification possibilities. |
|
X-Series: Semi-regulated 3-Phase power supplies 960W
Power supplies in the DIMENSION X-Series include an innovative concept for genereating a DC-voltage from a three-phase input.
- Output voltage: 24V (units with output up to 72V available)
- Output current: 40A
- 25% BonusPower
- AC-input 400V-Unit: 3AC 400V
- Efficiency: 95.5%
- Operational temperature range: -25°C to +70°C
- Dimensions: 96x235x157mm
- Weight: 1.4kg |
|
- 25W to 100W output
- 1-phase input
- Molded plastic housing
- Quick-connect spring-clamp terminals
- Output voltages from 5V to 56V
- Special measures for parallel operation
- Decoupling module for redundancy
|
|
- Unparalleled compact design, up to 55% less space required
- Unmatched efficiency of up to 95%
- MTBF > 600 000h, specified capacitor lifetime > 50 000h
- 80W to 480W output power
- 1-phase or 3-phase input
- Metal housing
- Quick-connect spring-clamp terminals
- Output voltages from 12V to 56V
- 150% peak load capability up to +60°C
- DC-OK relay contact
- Operation from -25°C to +60°C
- Active PFC, even for 3-phase input
- 85V to 264Vac wide-range input (single phase)
- DC input from 88V to 370Vdc (single phase)
- Extra low inrush current
- Ride through buffer units
- Decoupling modules |
|
* HiTech for most demanding industrial applications
* 12-56V, 2,5-30A
* Very high efficiency rates up to 93%
* Class B limits (emissions) for input and output
* Easy mounting and fusing
* Power Boost (up to 25% more capacity, no need for
overdimensioning)
* Ideal also for parallel operation
* World-wide approvals (UL, EN, CSA, CBScheme)
* Excellent cost-benefit ratio |
|
RPS-30: Industrial din rail power supply for automation systems, in plastic cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-30:
- universal AC or DC input (full range),
- protections: short circuit, overload, overvoltage,
- cooling by free air convection,
- Led panel meter for power on,
- 100% full load burn-in test,
- fixed switching frequency at 100 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
RPS-120: DIN rail power feeder for automation systems, in metal cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-120:
- AC input range selectable by switch,
- protections: short circuit, overload, overvoltage, overtemperature,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 55 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
Compliance with EMC standards:
- EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B,
- harmonic current: EN61000-3-2,-3,
- EMS immunity: EN61000-4-2,3, 4,5,6,8,11, ENV50204, EN55024,
EN61000-6-2, EN61204-3 Heavy industry level, criteria A.
|
|
General Purpose 24 to 240W
The TCL series is a family of DIN-rail manufacturer of power supplies which come in ultra compact, light weight plastic housing. These products offer an economical solution for many applications in the industrial, office or residential environments. Easy snap-on mounting on DIN-rails or also wall mounting with an adaptor.
High Performance 70 to 600W
The TSP series represents a new generation of high performance DIN-rail power supplies with innovative and powerful features! Shock and vibration proof construction with a rugged metal case these products are designed to work reliable even under most difficult factory conditions. Excellent electrical specifications and high immunity against electrical disturbances makes the TSP series product the best choice to power sensitive loads in industrial process controls, equipment tools or other demanding applications. A high power reserve guarantees a reliable start-up of loads with high inrush currents as i.e. motors. 14 standard models are available with tightly regulated, adjustable output voltages of 12, 24 and 48VDC for up to 25A. The power supplies are specified for industrial operating temperatures from -25°C to 70°C with convection cooling and provide also a thermal overload protection. All models feature as standard Remote ON/OFF and remote diagnostic via relay contacts or NPN output.
Low Profile Case 50 to 600W |
|
DC – PROFESSIONAL UPS Systems for Safety Relevant Installations
With their modular construction, the latest DC – UPS systems in the GTLB/GTPB series from Zentro Elektrik expand the existing comprehensive range of DC – UPS systems for supplying power to safety relevant installations.
The AC/DC systems in standby parallel mode are designed for outputs
from 250 Watt up to 600 Watt and fitted with professional batteries at the customer’s request. Additional DC/DC converters can be added to the system if more output voltages are required.
A battery control and monitoring module allows to control the charging current and temperature control of the charge closing voltage.
Over and above this, numerous monitoring and control signals are provided via relays, LED’s or manufacturer of potentiometers. A signal relay, for example,
if the charging voltage fails, to switch off the battery on it reaching the closing discharge voltage, to give advance warning of reaching closing discharge voltage with an additional adjustable threshold or individual limitation of the battery charging current to prolong battery life, and
many more. Light emitting diode displays and adjustable potentiometers provide for comprehensive signalling and the ability to adjust the maximum charging voltage or the defined point of battery switch-off. |
|
Din rail switched mode power supplies with high performance and compact dimensions, in linear or switching technology. For instance, the 240W/24V/10A model come with PFC, 3-phase wide range input and are only 125 x 125 x 125mm.
- DC output: 12V or 24V fixed, 12...14V, 24...27V, 48...56V adjustable
- AC input: 230V or 90..264 (wide range)
- Powers from 6W to 960W
- Linear and switching mode types
- PFC
- 3-phase variants
- Remote sense
- Power fail output |
|
| MPD now offers a full range of standard DIN-Mount AC/DC power supplies. Ranging from 45W to 240W (upcoming releases will extend the line to 960W) these units offer high power density, universal AC inputs, full international approvals (including UL 508), and Din track mounting capability. If your equipment requires a rugged, high performance industrial power source and the convenience of DIN rail mounting; we have a low cost power supply to fit your needs. |
|
| The WSX43P is a Din rail mounting power interface board which extends the versatility of the WSX43B Precipitation detector by proving mains power interface, adjustable set-point temperature and higher power relay output. |
|
| ... products without technical information |
| |
|
|