- Industrial machines and equipment >
- Mixing and Dosing >
- Dosing dispenser
Dosing dispensers
piston - dosing systems • Piston dosing for impregnating resin application • Systems consisting of material pistons - with a pneumatic or electric drive unit • Stainless steel piston, the dosing ...
TARNOS volumetric dosing groups are designed for a perfect material manipulation for feeding, mixing, packing and dosing. Groups are composed by five different components: reception hopper, electromagnetic ...
Doseuro pre-engineered JSO systems are designed to provide a complete dosing solution for all our metering pumps. JSO systems include rugged PP frames (1.5 cm) for single or dual dosing ...
The e-FILLY is designed for laboratory use to fill liquid, creamy and pasty products without having to replace any of the parts. Compared to the original model, e-FILLY has a servo motor, is totally electronic, and does not use compressed ...
Dumek
The FILLY is designed for laboratory use to fill liquid, creamy and pasty products without having to replace any of the parts. Wide dosage range, up to 1100 ml Pneumatic running The suction and batch speeds are independent and separately ...
Dumek
Precise volumetric and gravimetric feeding of hardly to free flowing powders, wet powders or bridge builing powders. These feeders can be upgraded with a scale and used in a gravimetric loss-in-weight or batch feeding process at any time.Numerous ...
Three-Tec GmbH
The volumetric and gravimetric single or double screw Quick Clean feeders are very easy to dismantle and to clean. Thanks to the easy detachment of quick-release rings, the hopper can be removed in one piece, as can the screws ...
Three-Tec GmbH
... with easy exchangeable dosing tools. Various dosing tools, such as double concave, double solid or twin spiral screws facilitate adaptation to the product to be dosed. Double concave screws and an agitator ...
Three-Tec GmbH
Demak equipment for LED encapsulation are studied to make them outdoor & chemical resistant. Thanks to the Continuous Vacuum Technology, the resin will be always treated in the best way, in order to avoid any bubble and moisture on the ...
Demak S.r.l.
... to use Piston pumps sometimes. These pumps are suggested for sealing applications requiring a continuous and homogeneous dispensing of the products. No reloading is needed. With low viscosity products the gear pumps ...
Demak S.r.l.
Demak equipment for LED encapsulation are studied to make them outdoor & chemical resistant. Thanks to the Continuous Vacuum Technology, the resin will be always treated in the best way, in order to avoid any bubble and moisture on the ...
Demak S.r.l.
Electronic dosing machine with gears able to provide a wide range of dosing: from 3gr minimum to the total quanti- ty of hopper. It’s suitable for filling, stuffing and dripping cream, chocolate etc. ...
De Danieli snc
Electronic dosing machine with gears able to provide a wide range of dosing: from 3gr minimum to the total quanti- ty of hopper. It’s suitable for filling, stuffing and dripping cream, chocolate etc. ...
De Danieli snc
Electronic dosing machine with gears able to provide a wide range of dosing: from 3gr minimum to the total quanti- ty of hopper. It’s suitable for filling, stuffing and dripping cream, chocolate etc. ...
De Danieli snc
The dispenser 200ETC (digital) is calibrated in function of time/pressure and exists in 0-1 bar and in 0-7 bar. It is equipped with a MAC solenoid valve that optimizes the responsiveness and durability of the dispenser. ...
POLY DISPENSING SYSTEMS
The dispensing is calibrated time / pressure. The dispensers 300ETC (digital), they have a fine adjustment of the time / pressure to provide a constant flow of product and a setting of dispense time to ...
POLY DISPENSING SYSTEMS
... components of assembly and blocks of chip with scale. The dispenser7050 is equipped with a solenoid valve in vacuum air with electric drive by footswitch’s pressure. The electro-pneumatic dispensers ...
POLY DISPENSING SYSTEMS
We have metering equipment for polyethylene tanks with capacities of 100, 200, 300, 500 and 1,000 litres. This equipment can be provided with a range of components: metering of solids, level, agitators ...
Semi-automatic pneumatic dosing machine for dense and semi-dense products - dosage capacity from 10 to 500 ml - the dosage volume can be varied even while the machine is working - easy disassembling and cleaning of the ...
AXOMATIC
Semi-automatic pneumatic dosing machine for dense and semi-dense products - dosage capacity from 10 to 1000 mll - the dosage volume can be varied even while the machine is working - Easy disassembling and cleaning of ...
AXOMATIC
... After the filling on the rotating table the containers reaches the postion on the discharge side - dosing range between 10 to 1100 ml - adjusting dosing volume also when the machine is moving - easy dismounting ...
AXOMATIC
... is a semi-automatic bench-top machine for dosing various types of liquid products. It is prepared for Nr. 2 dosing syringes and Nr. 2 filling syringes in two steps. It is equipped with a BICYLINDRICAL ...
... applications like dosing minuscule yet accurate amounts of liquid or extremely viscous products like honey, jelly, etc. The vital feature of the machine is its ability to attain exceedingly high rates of precision in ...
Tenco
A range of precise and reliable volumetric dosing machines Dosamatic Plus is a pneumatic dispenser for dosing several kind of products. The machine allows the filling of food, chemical, ...
Tenco
These air-operated volumetric fillers are specifically designed for products that make foam (detergents, cleanings). The machine can be equipped with materials compatible with different products (alimentary, chemical) When starting ...
Tenco
... of volumetric dispensing systems, DATRON sets exceptional standards in the field of industrial dispensing technology for small and medium-sized components. The heart of the dispensing ...
DATRON
DATRON's dispensing system PR0500-RT with rotary indexing table is the ideal solution for semi-automated production. It enables the loading and unloading of components during the dispensing ...
DATRON
... two dispensing heads can be in use simultaneously. Dispensing from cartridges or feeders (for example hobbocks or drums) is possible. Sensors for compensation of part height and needle deviation ensure ...
DATRON
Flow rate: 0.1 kg/h - 500 kg/h
... gravimetric feeding Whether integrated into our Gericke Formulation Skid GFS or as standalone loss-in weight feeder accurate metering of bulk solids is key to process control and ensures highest product quality standards. ...
... process, accurate metering of bulk solids is key to process control and ensures highest product quality standards. Loss-in-Weight Feeding Our gravimetric feeders and controllers are the perfect match for accurate ...
ThePen by START International is a refillable pen for controlled application of liquid solutions. It can be filled with many different kinds of liquids (fluxes, alcohol, protective coatings, lubricating oil, inks, etc.). The fine tip ...
DVM volumetric dosing units are particularly handy. The direct percentage setting simplifies programming, while use is very flexible thanks to the 100recipes storable. The inclined screwcontrols the accidental ...
Moretto
... DVM H is a screw type volumetric dosing unit suitable for temperatures up to 180° C. Thermally insulated dosing body Direct percentage setting 100 receipts on memory ...
Moretto
The volumetric screw dosing unit has been upgraded, featuring even simpler use thanks to a touch view control. Revised in both technology and design, this unit features innovative characteristics: ...
Moretto
2-component metering plant For Applying: epoxy resins polyurethane resins silicones adhesives Technical Data: •Stainless steel chassis •Rollers •2 x stationary containers 70/30 litres •Metering block with two valves •Metering ...
Power: 0.5 kW
... product, or to adjust the dosing parameters in each use. 3. Improved quality The high accuracy in the dosing and programming of the recipes enables the DMS solid dosing system to ...
Flow rate: 1,000 kg/h
Power: 3 kW
... automation Automation of dosing and recipes preparation processes avoids errors, increases the precision of the recipes and increases productivity and the quality of the final product. The POWDER DOSING ...
Power: 0.2 kW
... ideal for dosing sourdough and other liquids to add to the final recipe. 1.Maximum precision The POWDER DS dosing system enables recipes to be prepared with a precision of ≤ 2 gr. 2.Recipe automation The ...
The DOSER GDSA has the aim of extracting and adjusting well-defined quantities of product. In its standard type, it is made of an upper container where the product to be dosed is manually stocked or automatically loaded. Generally, ...
... level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre ...
... user-friendly and cost effective ink dispensing system that is also a comprehensive ink room management system, especially when supplied with our powerful ColorPoint Manager software. Your ColorPoint ...
Rexson Systems
... ColorPoint dispenser is flexible and easily configurable to suit your needs. Typical applications include - • waterbased ink dispensing • solvent ink dispensing • paste ink dispensing ...
Rexson Systems
ColorPoint systems can be supplied configured as TwinHead units. This technology allows your system to produce two batches at the same time - so double the output, but not double the price! Alternatively, one dispense head can be ...
Rexson Systems
Accuracy: 2 %
... • Dosing range: up to 500g • Scale readout: 0,1g • Hopper capacity: 5 kg • Storage of up to 100 different dosing formulations • User interface in English or other • Tea bag holder with adjustable ...
Alba d.o.o.
Accuracy: 2 %
Gravimetric dosing system for neonatal Hermetia illucens larvae, with a dosing range of 400 - 2000 mg and accuracy from 2% onwards. The coating of feeding and weighing surfaces prevents the sticking of ...
Alba d.o.o.
Accuracy: 1 %
Flow rate: 1 g/min - 200 g/min
Gravimetric system for continuous dosing of powders and granulates. With its intelligent self-learning software, the system provides high accuracy throughout the dosing range. Technical details • ...
Alba d.o.o.
... storage volume • Producing big volumes of tinted products on a compact dispensing system • Increasing flexibility and performance The FS XS is our smallest fully automatic dispensing ...
FÜLL Process Group
Dispensing plants provide highest reproducibility for each individual formulation component of any tinted product in desired quantity and shortest dispensing time. • Just-in-time manufacturing of any ...
FÜLL Process Group
Dispensing plants provide highest reproducibility for each individual formulation component of any tinted product in desired quantity and shortest dispensing time. • Just-in-time manufacturing of any ...
FÜLL Process Group
SUPREMA is the I-Tech dosing system for glazes and engobes, as well as inks, paints and varnishes that allows the creation of any type of coloured product with extreme precision and rapidity. The system can manage ...
... à 350 cc. • Mod. F/500 dosing range from 20 à 500 cc • Mod. F/600 dosing range from 20 à 600 cc. • Mod. F/1100 dosing range from 70 à 1100 cc. • Mod. F/2500 dosing ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining