|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
The model DV509 diaphragm valve is designed for precise flow control of low to medium viscosity liquids with a minimum shot size of 0.0001cc. The diaphragm separates the wetted parts from the air supply which makes it suitable for dispensing cyanoacrylates, reagents, anaerobics, UV adhesives and resins, paint, ink, solvents, glue, electrolytes, alcohols, and other volatile substances.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Minimum shot size 0.001cc
• Suitable for machine integration
• Will dispense hazardous materials
• Has a high cycle rate of 500 shots a minute
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
Description:
The CO.RA. DOSING SYSTEM allows the discharge of the product in a closed cycle drum. It is composed of an electronic weighing system and a DOUBLE VALVE. The vane of the latter transfers a large quantity of product while the rotor completes the requested dosage.
|
|
|
|
|
|
Controlled Discharging System for Iris Diaphragm Flow Control Valves
Features / Benefits:
Actuation of iris valves where individual valve actuators are not cost effective or efficient.
Eliminates reliance on manual tools to open valves.
Eliminates worker direct exposure to the product.
Increases worker safety in situations where access to the iris valve requires an operator to climb up a ladder/platform or reach on the ground.
Can be installed as an independent discharge station for bins, drums, bulk bags, or retrofitted to existing equipment, (lifters, tablet press, bottle fillers, etc.), including integration controls.
Can be set to work on a variety of containers and valve sizes in one package.
Control packages range from simple powered open/close to fully automated systems with preprogrammed open/close, and dosing systems.
All contact materials are T-316L stainless steel with a mirrored polish. All non-contact exposed parts are T-304 stainless steel.
Control system allows for repeatability of activities that can be validated.
Standard Packages:
iValve™ Dosing System - basic package:
This package includes the powered opening system with a control package of powered open/close that is manually controlled with pushbuttons and joysticks. This system is configured to work on a single size and type of iris valve that is oriented in the same location on each container.
|
|
The metering task becomes increasingly easier. Pre-mounted complete solutions made by ProMinent are immediately available and ready for the use in important applications. Sensor technology, controllers and metering pumps form a unit with the necessary tanks and are ready for operation without installation work.
Metering systems have three main advantages compared to single components:
* Only one supplier and contact partner
* No interface problems between single components
* No own mounting works necessary. On demand, the whole system will be supplied as premounted and ready for operation or it will be commissioned by our technicians at the spot.
|
|
Superior resist handling
The use of high-torque, stepper motor technology results in a consistent controllable discharge volume. The discharge volume is not affected by changes in viscosity or by filter performance. Repeatable accuracy of 0.3% of the discharge volume is maintained at all times.
* Repeated precision: ±0.3% (F.S.)
* Linearity: ±0.5% (F.S.)
* Resolution: 0.01 ml or below
High Purity
The pump end utilizes a tubephragm design eliminating dead volume and low velocity areas where resist can stagnate. This prevents the collection of particles and allows the pumps to maintain the highest purity possible.
Flexibility in Applications
The discharge velocity as well as volume are easily adjusted to expand the capabilities to many resist-coating processes, including the application of small amounts of resist in a short period of time.
|
|
|
EFD offers a wide range of valve systems for dispensing accurate, repeatable amounts of almost any assembly fluid, from thin solvents and adhesives to thick RTV sealants and brazing pastes.
|
|
General-purpose valve for use with a wide variety of medium to high-viscosity fluids. A slight snuffback at the end of the dispensing cycle prevents dripping between shots.
For use with:
- Brazing pastes
- Epoxies
- Greases
- Paste fluxes
- RTVs/sealants
|
|
Handheld dispense valves are a good choice for manual assembly applications where a timed shot is not required and a relatively large amount of fluid is being consumed.
Operation is simple and straightforward. Fluid is supplied to the valve from a pressurized 1 liter or 5 liter tank. To apply fluid, the operator places the dispense tip in position and presses a lever on the side of the valve. Releasing the lever stops the flow with a fast clean cutoff.
725-HL Handheld piston valve for medium to high viscosity fluids
752V-HL Handheld Diaphragm Valve for low-to medium-viscosity fluids like cyanoacrylates and anaerobics
740V-HL Handheld needle valve for low-viscosity fluids like solvents and MEK
|
|
The M.V.P. Patriot™ High Output System offers a positive displacement pump design that delivers highly accurate ratio control of ±0.1%.
The secret to Patriot’s unprecedented precision is the unique pumping system. Patriot™ is a versatile pumping system that addresses many of the problems experienced in composites application.
|
|
EFD's unique high-pressure dispensing tools make it easy to apply RTV silicones, epoxies, medical-grade adhesives and other very thick fluids through dispense tips as small as 0.004" in diameter.
These tools are designed to work with EFD air-powered dispensers, and will multiply the output of a standard 100 psi dispenser up to 7x, producing a maximum dispensing pressure of 700 psi. They provides fast, fatigue-free application of thick assembly fluids, minimize the risk of repetitive stress injuries and increase yields by helping workers produce more consistent parts in less time.
These compact, lightweight tools are available in two versions: the HP4x uses 10cc EFD syringe barrels and pistons and produces a maximum pressure of 400 psi. The HP7x unit uses 3cc EFD syringe barrels and provides up to 700 psi of dispensing pressure.
|
|
Stainless steel balanced spool valves apply uniform amounts of thick materials like greases and silicones at pressures up to 2500 psi.
To keep dots and lines consistent and prevent drooling between shots, the 736HPA valve uses an adjustable stroke control to regulate opening surge and closing snuffback.
For use with:
Greases
RTV's
Sealants
Silicones
|
|
The VC-1195A is a 4-way dispensing valve controller that can be used to control one or two dispensing valves with dual air ports for 4 way pneumatic operation simultaneously. The secondary air input will close a valve faster than using the valve's internal return spring, providing an increase in speed and suck-back.
Features
• Improves a valve's operational speed and suck-back
• Increases shot size accuracy
• Simultaneous control of two valves
• Timing interval from 0.01 to 31 seconds
• Fast response internal pneumatic solenoid
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
The DLQ family comprehends a variety of systems particularly suitable to treat liquids with low density. THE PRE-STORAGE TANKS are planned to satisfy the different requirements; they can be installed on loading cells to control always the level or to function like a real weighing balance.
THE MIXERS are equipped with stirrer devices in accordance to the liquids to dose, they are controlled by an electric motor reducer or by a pneumatic motor. This last one is particularly suitable for application in accordance to the norms ATEX. THE FEEDERS are made in different sizes and are equipped with types of pumps having a power according to the feed rates to make; They can be installed on loading cells ( DLQW ) and be equipped with proper electronic instruments to realise gravimetric dosing logics both in continuous and batch.
|
|
|
Measuring valves are the essence of dualine lubrication systems. They are munted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each pressurisation cycles, they indirectly discharge fixed volume of lubricant to the bearing etc.
|
|
Two ranges of line mounting adjustable metering units for use with a dualine system, which discharge a fixed volume of lubricant to half the lubrication points on pressurisation of one line and to the remaining points on pressurisation of the second line.
Benefits:
* Each measuring valve can have from one to four independent operating sections.
* Two normal discharge connections for each operating section reduce the overall cost of the system.
* Any section of the valve can be modified to one discharge, allowing a double sized discharge or an odd number of outlets on the valve.
* Wide stepless adjustment bands for each size of valve allow optimum lubrication delivery to every bearing.
* Positive hydraulic operation with visible indicator of operation.
|
|
|
|
|
|
Parker’s RB9 Multi-Function Flare Valves are used as service valves in mini-split heat pumps. The valves isolate sections of a system for servicing and provide a means for charging refrigerant into a unit. The valve also holds a restrictor and screen to meter refrigerant and filter debris, increasing system efficiency.
* Inclusion of a restrictor into the valve provides precise refrigerant metering to increase efficiency.
* Noise and vibration through the unit are reduced by inclusion of the restrictor into the valve.
* Inclusion of a screen into the valve filters dirt and debris prior to entering the restrictor, maintaining full flow and enhancing performance.
* Captivated stem-design holds the stem within the valve to prevent it from releasing when the cap is removed or the unit is serviced, reducing the potential for injury.
* Combined functionality of valve, restrictor, and screen reduces component inventory (shut-off valve, field-access gage port, expansion device, filter screen or strainer, line-set connector, check valve, by-pass circuit, & capillary tubes) leading to a reduction in overall installed cost.
* Combined functionality of valve, restrictor, and screen also reduces space requirements within a unit and eliminates braze joints to reduce potential leaks paths.
|
|
|
Porter Metering Valves are designed for extremely precise control in low flow gas and applications. They are available as valve cartridges, integrally mounted in flowmeters and inline valve assemblies with straight or angle patterned valve bodies. All inline valve assemblies have 1/8" female NPT inlet and outlet ports.
|
|
The Dispensit® Model 1055/1095 is a controlled-flow metering rod valve, designed to produce precise beads of materials of nearly any viscosity.
Features:
- Controlled flow positive displacing metering valve
- Simple control
- Precision hydraulic flow control
|
|
For applications that do not require the flexibility of a robot, mta automation ag proposes a simple dispensing station.
The modularity of our slides and standard elements enables to find a solution adapted to the application.
The programmable electronic control allows the dispensing axes and values to be set.
The stations can be integrated into production lines for various dispensing applications.
|
|
60% smaller and 70% lighter than typical dispense valves, the 702 Series is ideal for applications where space is tight or installation on movable arms where size and weight must be considered.
For use with:
- UV- and light-cure adhesives
- Resins
- Solvents
- UV coatings
|
|
The MV-0810NM-A needle valve is designed for precision dispensing of all types of fluids in minute to moderate shot sizes. Its pencil-type grip makes the valve suitable for either hand held or automatic applications. Shot sizes may be fine tuned by turning the adjuster at the top of the needle valve.
Features
• Available in Stainless Steel and Plastic
• Stroke adjustment to fine-tune shot size
• Lightweight design for hand-held dispensing
• Positive shut-off
• Micro-shot deposits
|
|
Characteristics of the numerical volumetric dispenser for two-component products (NBD):
- Simple setting of the dispensing parameters via numerical controller
- Adjustable dispenser volume of 2 x 0.1 mm³ to 1250 mm³
- Volumetric dispensing without valve
- Ceramic dispensing piston and cylinder (Al2O3)
- Repeatability of the dispensed volume > 99%
- Liquid or viscous products dispenser - No seals (no wear)
- Mixing by dynamic or static mixer
- Low-volume dynamic mixing chamber (interchangeable)
- Programmable dispensing ratio
|
|
The VDP150 precision volumetric dispensing pump is a pneumatically operated positive displacement valve designed for constant volumetric dispensing of low to medium viscosity fluids. The double acting metering valve has a volume range of 0.005cc to 0.015cc.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Suck-Back eliminates post-dispense "dripping"
• Dispenses accurate micro-shots of 0.005 to 0.015cc
• Integral inlet/outlet check valves
• Positive Displacement metering
|
|
EFD’s Radial Spinner System makes it easy to apply neat, consistent bands of low-to mediumviscosity fluids inside cylindrical parts between 0.4” and 5” in diameter.
Compact size and precise control make the Radial Spinner System ideal for processes where fluid must be applied inside small cylinders or confined to specific locations and kept off surrounding areas. Inert wetted parts make the system ideal for use with reactive fluids like cyanoacrylates and anaerobic adhesives.
The Radial Spinner System includes a precision dispense valve, air motor, bracket, valve/motor controller, disc assembly and dispense tip. Disks and tips are available in different sizes to meet a wide variety of applications.
|
|
Engineered to specifically address the waste and discomfort that result from dispensing materials in collapsible tubes. A comfortable, balanced design that safely protects the tube from damage and the operator from contamination.
First time users are recommended to supply a tube sample.Features
• Eliminates waste
• Avoids material contamination
• Improves operator safety
• Prevents tube damage
|
|
The development of robotics has led Matrasur Composites to widen its equipment offer, manual and automatic by integrating an internal Robotic Service in the company, completely dedicated to the design of robotic solutions.
The new generation of spray-up robots from MATRASUR Composites covers various stages of composite part production: gelcoat spray-up, resin spray-up, simultaneous spray-up of resin and fibreglass, and spray-up of demoulding agent.
Two programming technologies are available: Self learning (ROBOMAT series); the robot memorizes and reproduces the best operator’s movements endless number of times, or In-line programming based on a simulation software (ROBOSTRAT series).
|
|
|
|
