|
|
Designed for controlling a broad range of flow rates of liquids and gases, AALBORG®'s Barstock/CV™UTILITY VALVES are available in three conveniently overlapping orifice-needle sizes.
These versatile, rugged and reliable VALVES are suitable
for laboratory instrumentation, bench top or OEM flow
control purposes.
VALVES are offered in straight (T) and 90 degree (L) flow
patterns. All valves are supplied with 1/8" FNPT inlet and
outlet ports. Valve cartridges are also interchangeable with built-in valves of AALBORG®'s series of P, T, S, and G Flow Meter product lines.
The VALVE body is precision machined chrome plated
brass or type 316 stainless steel.
DESIGN FEATURES
. Panel mountable.
. Bubble tight shutoff.
. Straight or 90 degree flow patterns.
. Brass or 316 stainless steel.
SPECIFICATIONS
MAXIMUM PRESSURE: 500 psig (3792 kPa).
MAXIMUM TEMPERATURE: 180º F (82º C) (brass valves); 250º F (121º C) (stainless valves).
MATERIALS OF CONSTRUCTION
CONNECTIONS: 1/8" female NPT.
O-RINGS AND PACKING: PTFE and Buna-N® (brass valves).
PTFE & Viton® (stainless valves).
|
|
Precision needle valve applies low-viscosity fluids in accurate, repeatable amounts. Because the stainless steel needle seats in the tip adapter, there is virtually no dead fluid volume between shots.
For use with:
- Accelerators
- Marking inks
- Silicone oils
- Solvents
- UV-cure adhesives
|
|
Mediajet – the automated Petri dish filler
Two applications – one system: MEDIAJET is a compact, automated Petri dish filler that requires only minimal bench space in the laboratory. It can easily be converted into a test tube filler.
Incorporating a new mechanical dish guidance system, monitored by a set of sensors throughout the filling process, the compact MEDIAJET is the first system to provide truly reliable, walk-away operation. Operational downtime and media loss due to 'dish jams' resulting from variations in the diameter, shape and rim profile of the disposable plastic Petri dishes are completely eliminated.
For every lab involved in culture media production, the TUBEFILLER option is the perfect expansion to the functionality of MEDIAJET, as it allows conversion into a test tube filler in just a minute. This unique solution from INTEGRA Biosciences is making MEDIAJET the most versatile system for media dispensing in the market. TUBEFILLER is the alternative to the tedious and time consuming work of manual tube filling. It is designed for the continuous processing of racks for test tubes of various diameters and therefore suitable for a wide range of dosing applications including the production of agar slants, broth cultures or NaCl dilutions.
|
|
The dispensing table-top robot TR300 designed and produced by mta automation ag is controlled by an industrial PC allowing the automation of dispensing operations for liquid or viscous products. The increasing demands of customers in term of quality, precision and repeatability lead to increasing levels of automation. However, when production batches are small or products widely dissimilar, the cost of sophisticated equipment can place automation beyond the reach of many would-be users. In order to satisfy this need, mta developed a table-top robot which combines flexibility with required high levels of process quality and repeatability, all at a reasonable cost.
The 3 or 4 axes can be fully programmed, as are the dispensing parameters for each dispensed point.
|
|
APS300
Automated Pourer Stacker
The APS300 is a compact automated pourer/stacker designed to provide an efficient hands-free plate preparation. Easy to use, the APS300 ensures a high level of productivity, traceability and security at a moderate cost. All user interfaces and features will help to increase productivity and provide optimal working conditions. For total traceability, the optional ink-jet printer prints directly on the side of the petri plates.
Single carousel with a capacity of 320 plates Ø 55 or Ø 90 mm
Pouring rate up to 750 Petri dishes per hour
Hands-free and automated operation
Easy programming, alphanumerical display and keypad
Store up to 40 user programs
Easy-Load pump for fast tubing loading
Intelligent alarm management
Optional ink jet printer for perfect traceability on the side of the Petri dish
Optional ticket printer
Specific versions for the food, water and clinical laboratories available
The APS300 has been designed to pour and stack automatically up to 320 Petri dishes without any operator intervention once the carousel has been loaded and the programme started. Inverted plates are simply ignored and stacked empty without any operation interruption.
The transfer disc can be easily removed for cleaning
|
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
|
|
Stainless steel balanced spool valves apply uniform amounts of thick materials like greases and silicones at pressures up to 2500 psi.
To keep dots and lines consistent and prevent drooling between shots, the 736HPA valve uses an adjustable stroke control to regulate opening surge and closing snuffback.
|
|
|
EFD offers a wide range of valve systems for dispensing accurate, repeatable amounts of almost any assembly fluid, from thin solvents and adhesives to thick RTV sealants and brazing pastes.
|
|
EFD’s Radial Spinner System makes it easy to apply neat, consistent bands of low-to mediumviscosity fluids inside cylindrical parts between 0.4” and 5” in diameter.
Compact size and precise control make the Radial Spinner System ideal for processes where fluid must be applied inside small cylinders or confined to specific locations and kept off surrounding areas. Inert wetted parts make the system ideal for use with reactive fluids like cyanoacrylates and anaerobic adhesives.
The Radial Spinner System includes a precision dispense valve, air motor, bracket, valve/motor controller, disc assembly and dispense tip. Disks and tips are available in different sizes to meet a wide variety of applications.
|
|
Millennium® M-2010 Dispensing System
The high-performance Millennium® M-2010 system incorporates field-proven Millennium process control of fluid delivery and software-managed temperature control. The platform%u2019s low-inertia, closed-loop, 3-axis motion system offers fast, smooth acceleration and the dispensing precision to handle the most challenging dispensing applications. The Millennium® M-2010 dispensing system delivers unparalleled high speed and accuracy for today%u2019s most demanding surface mount adhesive (SMA) applications.
Features
- Asymtek%u2019s exclusive Fluidmove® for Windows XP® (FmXP) software provides quick and accurate programming control
- Non-contact jetting reduces time spent programming standoff locations, as well as time between assistance
- Fast motion acceleration (2g peak), with up to 1 m/s X-Y velocity for high throughput with ± 0.025 mm repeatability
- Compact footprint (1.65 m2) conserves factory floor space
- SMEMA-compatible Multimove Conveyor software conveys parts simultaneously, not sequentially, enhancing yield
- Improved throughput using pipelined fiducials
- Data-driven, offline programming with the CAD Import program using CAD-generated data
- Network interface card included, allowing connection to a local Ethernet network
- SEMI-S2 compliant, ergonomic flat-panel display and integrated keyboard
Recommended Applications
- Solder Pastes
- Silver Epoxy for Die Attach
- Surface Mount Adhesives
System Pumps
DJ-9000 DispenseJet® The Latest Jet Technology
DV-7000 Heli-Flow® Pump
|
|
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke.
|
|
Jetting is the best way to dispense many fluids quickly and accurately. It is non-contact and has a high shot-generation rate. . Jetting offers many advantages over traditional needle dispensing to deliver speed, quality, and low cost of ownership. The DispenseJet DJ-9000 can be cleaned in a few minutes, and has fast changeover of wetted parts The DispenseJet DJ-9000 is for use exclusively on Asymtek automated dispensing systems.
Features
- Jets a wide range of fluids including underfill, SMA, encapsulants, conformal coating, UV adhesives and silver epoxy
- Fast - jetting eliminates z-axis motion
- Accurate - jetting is highly repeatable
- Easy to use and maintain
- Small wetted path so less fluid is wasted
- One model handles multiple applications
- Dot diameter as small as 200 micrometers (0.008 in.), compatible with typical 0402 components
|
|
DATRON dispensing systems
High precision and process security at short set-up and cycle times
The increasing economic demands in the area of dispensing require precise, process-sure and flexible system engineering. DATRON dispensing systems were specially developed for industrial adhesive, sealing or EMC applications and have earned customer confidence with their high performance and high volume consistency.
DATRON dispensing systems offer the highest possible process security and flexibility with its combination of electronic dispensing head with the patented control engineering. The use of special software technology allows speed-independent dispensing, which ensures high dispensing speeds and short cycle times. Also, these systems work independently of pressure and viscosity, so that process parameters don't need to be adjusted due to modified manufacturing conditions. In connection with the accessories developed for dispensing tasks, DATRON offers system solutions from one source to guarantee optimum quality for your manufacturing.
|
|
Chlorine gas dosing
VACUTROL
Change-over device (CHANGOMAT)
DOSITROL
Vaporator with safety device CSE
Our chlorine gas dosing systems are based on the vacuum safety principle and comply with the latest German safety regulations. Qualities such as the state-of-the-art standard of safety and corrosion resistance combined with only little maintenance to be done, contribute to the most distinguished reputation of our systems in the entire world.
|
|
We offer storage and dosing stations for all kinds of chemicals and application.
For example:
Dosing systems for phosphate elimination
Neutralization systems
Water treatment systems
Waste water treatment systems
Cooling water treatment systems
|
|
|
The ‘Alchemist’ dosing system is a fully automated stand-alone device which is designed to create mixtures totaling 1g or 10g, out of 200+ single ingredients. All of this functionality comes in a compact size.
|
|
|
Designed as a "Plug and Spray" machine, the Magic Flow is the best System to ensure repeatability whilst complying with the toughest EPA legislation. The mixing ratios can be stored in a wide range of up to 50 recipes and the icon guided touch screen allows easy communication between operator and machine. The precise dosing will always ensure a perfect finish. MagicFlow for all applications - including high and low pressure with solvent or water based paint and materials - Binks MagicFlow is the best solution.
|
|
The indicator of weighing TAD3 is primarily directed towards applications of weighing "Process".
Out of standard, Two exit RS485 MODBUS, Two entry TOR and two exits completely skeletal relays.
In option "Hardware", external modules DIO3 with 8 Entries TOR & 8 Exits relay; external modules ANA3 with analogical exit/16 bits.
In option "Software", a software of proportioning and formulation of 30 receipts and 24 sequences; a software of flow per weight loss for ponderal batchers...
|
|
The M.V.P. Patriot™ Standard Output System delivers power, versatility and unprecedented precision to the composites production process.
The secret to Patriot’s unprecedented precision is the unique pumping system. Patriot™ is a versatile pumping system that addresses many of the problems experienced in composites material application.
|
|
High-capacity metering unit for the processing of adhesives PolyMix 1000 up to 10 kg/min., PolyMix 2000 to 20 kg/min.
Gear metering unit for the processing of pasty/tixotrophic resins as filling station or via an external bracket directly at the component.
|
|
|
Complete MACT-compliant cart mounted system featuring a internal mix PC LEL chopper gun and Binks Unison precision catalyst metering pump. This outfit uses a 207-12240 internal mix LEL chop gun.
|
|
|
The 754 aseptic valve features a smooth fluid flow path that is free of entrapment areas. FDA-compliant wetted parts are made of 316L Stainless Steel and Teflon(*), making the valve suitable for Clean-in-Place and Sterilize-in-Place processes.
|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
|
The valves to membrane are planned in order to distribute material of lower-middle viscosity with a high degree of precision and doses of varied form and dimensions till fractions of microliter. The closing to motivating force assures the compatibility of the valves with the telephones exchange time/pressure. The short race of opening concurs the positive and fast closing of the valve. The metal ring of regulation of the race allows specifies settaggi of the dimension of the dose to distribute. The compact design with assembly geometries is horizontals that vertical concur great flexibility and facility of integration in the automated applications. The room of the fluid is in polyethylene to highest molecular weight (UHMWPE) for the majority of the applications, but he is available also in Teflon® for requirements of chemical compatibility and in Delrin® for UV. A version in stainless steel is moreover available (5622VU-DVD), with circuit of the fluid optimized specifically for the adhesive ones to polymerization UV, rendered of it and enamels used in the production of DVD and CD. The valves demand little maintenance, are easy to use and concur a fast substitution of pieces of reciprocation. The valve is available also in the palm version with commando to manual lever.
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
iVD - Pasty
Dispensing head for highly viscous media
The dispensing head is the essential part of every dispensing machine. It distinguishes itself by its highly precise, digitally controlled gear wheel pump, which is controlled by the DATRON iServo motor. A DATRON dispensing head is well suited for dispensing all conventional 1C materials, such as silicones and MS polymers in the viscosity range of 100,000 - 1,000,000 mPas. With the special pump design, filled abrasive media can also be optimally dispensed, up to a grit size of 50 µm. The digitally controlled iServo motor is able to position the gear wheel pump to a precision of 1 / 40 000 turn. This allows the smallest amounts to be dispensed in a process-sure way. Non-linear flow properties of the material can be compensated with the software.
|
|
Located in Rochester Hills, Michigan with additional offices around the world, Ingersoll Rand Dispense Systems creates turnkey systems for automatic and manual dispensing applications. Our complete dispensing solutions are configured from standard components to meet customer specific requirements for applications within many different industries.
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
|
