|
|
2400 Series dispensers bring exceptional process control to a wide variety of benchtop dispensing processes where adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material
|
|
|
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories
|
|
|
|
|
|
EFD's new Ultra® 2400 workstation is a precision dispensing system that applies accurate, consistent amounts of adhesives, lubricants, silicones, epoxies and other fluids used in benchtop assembly processes - from neat, controlled beads to uniform dots as small as 0.004 inches in diameter.
Several accessories are available to enhance productivity and customize the Ultra 2400 workstation for different applications. Options include a flexible task light, a 1.7X magnifier for precision closeup work, a flexible syringe barrel holder that acts as a convenient "third hand," and an ergonomic barrel grip with a touch-sensor finger switch and LED spotlight to illuminate the dispensing area.
Standard features include
- Simultaneous digital display of dispense time, air pressure, vacuum, shot count and mode, for greater process control than standard analog gauges
- A unique internal pressure reservoir that reduces cycle time and improves deposit control
- Multilingual display in English, German, French, Spanish, Italian, Chinese, Korean and Japanese
- Automatic voltage regulation from 85 to 265 volts, with universal power plugs
- Automatic U.S./metric conversion of all dispensing parameters
- Security lockout with tamper-proof password control
|
|
|
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
|
|
|
|
|
|
Ramsey Loss-in-Weight Feeders from Thermo Electron Corporation maintain quality and weighing accuracy, reduce material waste and improve blend consistency for increased profits. They accurately control the flow of powders, pellets, flakes or granules to critical processes. They handle hot, floodable and difficult material and are unaffected by dust and material accumulation.These feeders can increase your profits by maintaining quality and weighing accuracy, reducing material waste, and improving blend consistency.
Product Detail
The accurate feeding of dry bulk material is often critical to maintaining product quality. A feeder that weighs accurately and reliably can reduce material waste, improve blend consistency and increase profits.
Ramsey Loss-In-Weight Continuous or Batch Feeding Systems from Thermo measure the mass flow rate and total mass of various bulk materials, such as powders, pellets, flakes and granules. We incorporate the standard, low capacity and sanitary versions of our volumetric feeders into a complete gravimetric feeding system, providing accuracies of ±0.25% to 1.00% and more reliable process control over typical volumetric feeding systems.
There are many advantages to utilizing loss-in-weight feeders. They can handle hot, floodable and difficult materials; are unaffected by dust and material accumulation; and are well suited for low feed rate applications. The entire feeding system is weighed, so there are no errors caused by belt tensioning or tracking. No transportation lag time exists, ensuring precision second-to-second accuracy. Feed accuracy can always be checked during normal operation without the need for sampling.
The Ramsey Micro-Tech 2104 Loss-In-Weight Feeder Controller is specifically designed for continuous or batch loss-in-weight or gain-in-weight applications. It's easy to operate and calibrate with the aid of large easy-to-read displays; straightforward, tactile-touch keyboards; and software that prompts you through proper set-up and operational procedures. A single Ramsey Micro-Tech 2104 is capable of operating two independent loss-in-weight systems, which ultimately contributes to cost savings. A UL-approved version is also available.
|
|
|
Thermo Electron Corporation's Ramsey weighbelt feeders are designed for demanding industrial applications and provide accurate monitoring and control.
|
|
LDM080 Manual Lever Label Dispenser
- Heavy-duty manual feed label dispenser with hand lever
- Up to 3.15" (80mm) in width
- Dispenses from 0" to infinity in length
- Dispenses labels with one hand stroke
- Adjustable stroke to dispense labels at proper length
- Works with die cut and butt cut labels
- Made in the U.S.A.
|
|
Easy label dispensing…
The manual label dispensers from MR are a convenient and cost-efficient solution for dispensing selfadhesive labels on rolls.
By pulling the backing paper forward, a label is peeled off and is ready for application.
Decorative labels or special offer labels are easily dispensed in this way wherever you are – at manual work stations, counters, booths or other points of sale.
Your benefits:
- Easy to move
- Small and compact
- Simple handling
- Fast label change
- Quick and easy label peel-off
- According to size: up to five label rolls in one dispenser
|
|
HERMA 100 - manual dispensers
The convenient HERMA 100 manual label dispenser is ideally suited for low volume applications. Efficient and easy to use, it offers a very economical solution for small batch hand labelling. The units are widely used where the investment in automatic labelling machines cannot be justified, for example in post room environments and despatch areas.
Reel width: 80mm and 160mm
|
|
2 models of autonomous saddle jib cranes thanks to a refillable integrated battery :
HALLO EM21:
To pose your labels without efforts at high speed.
Format of the labels minimum:23mm (width of the siliconé support) lx17mm; maximum 52mm (width of the siliconé support) x100mm; with or without removal of caterpillars.
HALLO EM22:
Model more specifically adapted to the labelling of the fruits.
Same design features with the difference of the format of the labels: minimum:23mm (width of the siliconé support) lx17mm; maximum 33mm (width of the siliconé support) x100mm.
|
|
Distributor of labels width 140mm.
Label : format min. : 10mm x 15mm; max. format : 140mm x 200mm.
Speed: 5m/mn.
The advance of the label is regulated by switch.
Side adjustment of the cell.
This model also exists in width 200mm.
|
|
Cold Glue Labeler: High Speed
The Top Brain is an automatic rotary cold glue labeling machine for applying multiple pre-cut front, back and neck/shoulder paper labels, foil, etc. on glass and plastic containers at elevated speeds.
Top Brain labelers are particularly suitable for the soft drink and beer markets, where the aggressive nature of the product and the heavy-duty working conditions require robustness, precision and insensitivity to external agents.
|
|
| ... products without technical information |
| |
A complete reliable, versatile and workable range of automatic and semi-automatic machines for the closure of American style cardboard boxes with a strip of adhesive tape or gummed paper. Operating since 1975 we have gained the trust of big and small companies alike both in Italy and in Europe. The unique and advanced characteristics that feature on our machines, above all on the taping machines for gummed paper, make them unrivalled and reliable up to the present day.
ICMI specializes in custom made machines, finding solutions to satisfy all our customers’ needs.
Among our many solutions, there could be one that is suitable for you and if not, we can all talk together to find a solution that is right for you.
To complete our range, we have a large selection of taping machines for adhesive tape by DNC (E), economical and competitive with others on the market today. Products produced by DNC (E) are only available in Italy.
|
|
|
|
|
|
Pearson Packaging Systems' CS40-G Case Sealer is the newest addition to the Pearson product line. This fully-guarded case sealer is available in either mild or stainless steel construction. The CS40-G will top seal a wide-range of case sizes with hot melt glue at speeds up to 40 cases per minute.
Designed to Perform
Pearson's CS40-G is a fully automatic case sealer that includes a host of new and innovative features. By utilizing continuous motion and Pearson's innovative Compensating Independent Roller System™ (patented) and our Synchronous Drive System™, the CS40-G will consistently and reliably seal cases weighing up to 65lbs (29.5Kg). Need to go faster than 40 cases per minute? As the length of the case gets smaller the machine will seal cases even faster. Plus, with the newly designed, externally accessible adjustment points, changing over to different case sizes is easier and quicker than ever.
Reliability Plus
The Pearson CS40-G Case Sealer is engineered for safe, reliable performance. Like all Pearson machines, the CS40-G is constructed using only the highest quality components. Plus, each design is rigorously tested by our team of Six Sigma quality experts before any machine is shipped. Our manufacturing and quality control processes ensure reliability in the most demanding production environments.
Every CS40-G is supported by Pearson's team of service and technical support professionals who are available 24-hours a day, 7-days a week-worldwide.
|
|
HM-1500
Gluing machine Freestanding
Output: 1500 cartons/hour
The automatic carton closing machine HM-1500, freestanding version, is used to close cartons with hot-melt glue.
The machine receives the cartons filled with the product directly to the carton packer Serie MEGA. This machine is linked with conveyor belts.
The introduction, the carton spacer, the closing of the superior layer and the hot-melt glue application are automatic operations.
The machine has got a closer-layer system that is suitable to close rigid carton.
The intervention of the machine operator is only necessary in order to regulate the machine to take cartons of different sizes. It is a very simple operation which does not required skilled labour.
|
|
Hot Melt Glue Case Sealer - Wexxar WSH
The WSH is a fully automatic hot melt glue case sealer. Compact, versatile case sealers for top seal only or top and bottom seal. Stationary major flap folding and internal platen-compression system ensures perfectly butt-jointed and aligned flaps.
- Heavy duty compliant side drive belt transport through the machine: gentle to the product yet powerful enough for the heaviest loads
- Excellent accessibility for operation, set-up and service with convenient centrally mounted electrical controls and adjustability from both sides
- Interlocked safety guarding
- Corrosion resistant finished throughout
- Equipped with choice of Nordson or ITW Dynatec hot melt system
- Space saving compact footprint
- PLC (Programmable Logic Controls) equipped
|
|
| ... products without technical information |
| |
« HOT-MELT » BOX SEALER
Top-Bottom sealing for a range of box formats. Semi-automatic HM 900
or automatic HM 1200
STANDARD FEATURES OF HM 900 & HM 1200 SEALERS
- top/bottom sealing, using the « MELTON » hot melt system
- programming of adhesive strip lengths
- « pistol purge » function
- integrated box squaring function
- adjustable output rollers
|
|
|
|
|
|
APPLICATION
The high efficiency AT-802 automatic rewinding machine is excellent for the rewinding operation of various industrial, electrical and packaging adhesive tapes.
FEATURES
Automatic Length Counting: The 2-step length counter provides accurate rewinding length control. Once the set length has been reached, the shaft will instantly, automatically change, ensuring ease of operation and a highly efficient performance.
Programmable Controller: The high performance programmable controller offers convenient control of the entire rewinding operation. Both length and tension are accurately displayed by LED readout. The motion sequence can be identified with a signal lamp for full control of the motion status.
The paper core is held firmly on the pneumatic shaft, which provides easy, fast loading and unloading and greatly increases efficiency.
Automatic Wipe Down Device (OPTIONAL): This wipe down device fully eliminates the problem of wrinkling and air bubbles in the product after rewinding. This device further ensures the extreme smoothness of product.
Hydraulic Material Loading Device (OPTIONAL): This device performs material loading jobs with ease for operational convenience and added efficiency.
The pressure roll is air cylinder operated and the pressure is adjustable. The pressure roll firmly holds down the semi-finished products to ensure extremely smooth, stable semi-finished products running during rewinding operations.
|
|
| ... products without technical information |
| |
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: Non abrasive flexible granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 65
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 20% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface.
Non slip covering flexible, comfortable and conformable.
Environment: In wet or dry conditions for risk prevention and security. Chemical characteristic: Elastomeric polyurethane complex very flexible. Thickness: 1.6mm Granule: Non abrasive flexible granules 200µ Weight: 2.4kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 66
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 11.5daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Extention = 75% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 in application glued on surface M0 non insulating (LNE).
|
|
| ... products without technical information |
| |
|
|
|
|
APPLICATION Suitable for cutting OPP tape/PVC tape/Electrical tape/Mask tape/Double-side tape/Kraft tape/Cloth tape.
FEATURES Every machine motion is programmable. Operation ease and flexibility.
Silicon lubricating system: Recirculated silicon lubricant prevents adhesives from clinging to the cutting blade, and ensures smooth cuts each and every time.
Silicon lubricating system prevents the blade from sticking on adhesives and allows smooth cutting at all times. Silicon liquid is recirculated.
Each cut is exactly where It's supposed to be cutting head is positioned by a servo motor-ballscren combination along precision slide-heaving rails. Every move is smooth, fast and every accurate-even extremely long moves.
Each cut has our full support: Hydraulic pressure holds upper and lower tape rolls firmly against the cutting blade for maximum stability-no matter how large or small the roll diameter.
Double roll with single circular knives to increase efficiency greatly.
MAIN TECHNICAL PARAMETERS:
Valid Width 1.0M/ 1.3M/ 1.6M
Max. diameter material :150mm
Max. cutting width:3mm
Inside diameter of paper core: 32-76.2mm
Main motor :3HP
Blade drive motor(Servo motor) :5HP
Blade diameter: 200mm / 250mm
Blade speed:1450KG
Machine Dimension(L*W*H) 3790mm*1550mm*1750mm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, which is compliant to the CE regulation.
|
|
|
|
|
|
APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films...etc.
FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically.
OPTIONAL PARTS:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
MAIN TECHNICAL PARAMETERS:
Valid Width:1000mm/1300mm/1600mm
Max. diameter material:270mm (300 mm)
Max. cutting speed:35cuts/min
Inside diameter of paper core:32-76.2mm
Main motor:5 HP
Blade drive motor(Servo motor):3 HP x 6 P
Blade diameter:150-350 mm
Blade speed:360-1800 rpm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
|
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
Magnalube-GX is an altered version of the original Magnalube-G formula that contains molybdenum disulfide {MoS2}. The proprietary blend of Magnalube-G and molybdenum disulfide results in a grease with unique qualities.
Magnalube-GX should be considered especially when you are working in extreme-pressure environments. Customers have also found that Magnalube-GX can dampen sound in loud industrial applications.
If you would like more information on the benefits of using Magnalube-GX for your application, please contact our Magnalube-GX staff at gxteam@magnalube.com.
|
|
Inspection of glue bead dispensing
The products of Cordia range inspect the conformity of beads or glue application whatever their colour: extruded and fiberised beads and on all supports (sheet metal, aluminium, cast iron, glass).
The bead is inspected on all its length and for all the following characteristics :
- Continuity (glue lack or air bubbles causing interruptions)
- Width
- Position relative to references (distance to an edge, a hole... or position relative in the part benchmark)
- Height (3D configuration)
These functions are performed by a unique Cordia system.
Independent from the colour of the bead and the nature of the support
Robustness and reliability
Easy integration and implementation
Discover our products
Cordia F2D
Cordia M2D
Cordia M3D
Weld inspection
|
|
|
|
see the results for the following category : 
