|
|
|
Ranging from simple quench fluid tanks to highly complex buffer fluid set-ups, our systems generally have a modular structure and are tailored to individual requirements. Depending on their design, these systems cool or lubricate, circulate, apply pressure, protect against icing and ensure that mechanical seals work reliably, last longer and do not allow any leakages to escape into the environment.
|
|
DATRON PR 0500
High-capacity and multifunctional!
With the new generation of constant-volume dispensing systems DATRON sets the standard in the field of industrial dispensing for small and medium-sized components. At the heart of the dispensing system there are different, exchangeable dispensing heads which can apply a large range of dispensing and materials and adhesives. With the special DATRON accessories, e.g. module clamping systems or CAD/CAM software, set-up times are drastically reduced and productivity significantly increased. Further features such as the automatic nozzle compensation or the XYZ sensor lead to very high process reliability and repeatability also when dispensing critical components.
|
|
|
|
|
|
Ci-DMS is a highly configurable, standard product used to weigh and dispense pharmaceutical raw materials. It is designed to ensure efficient and consistent dispensing of excipient and active materials in a secure data environment with full audit traceability.
As a pioneer in this field, our first such system being installed in 1976, we have always sought to provide the best in system scope and depth by applying the most advanced software tools and practices, always retaining a sharp focus on the practical solution.
Key features include:
- Fully object oriented, modular 3-tier (user, business and data layer)
- Designed to GAMP standards
- Compliant to 21 CFR part 11 for electronic signatures and records
- Fully validated
- Secure access, e.g. complies with NT security procedures
- Secure data, fully relational database
- Configurable interface module to allow MES/MRP/ERP compatibility
- Full electronic lot traceability and audit trail
- Operator friendly screen layouts and prompts
- Multi-lingual facility
- Maintenance and Upgrade contracts
|
|
|
|
|
|
Series E Hand Held Test Measures:
The Seraphin® Series E test measure is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 40 liters (10 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available. Seraphin® no longer manufactures terneplate test measures (see news and events). Our hand held measures provide a true standard of comparison for verifying the metered output of liquid dispensing equipment. They are ideally suited for fuel dispensing and other precision liquid metering applications.
A Seraphin® test measure is easy to use, reliable, low cost way to measure the output accuracy of liquid metering equipment. They are built and calibrated to the latest OIML R-120, API and NIST handbook 105-3 standards. Seraphin's® test measures have served as the filed standard used by most Weights and Measures authorities since 1915.
The Seraphin Advantage:
Whether you need to ensure compliance with Weights and Measures requirements, or are looking to support ISO requirements for meter calibration, or simply wish to maximize the economics of your metering application, Seraphin® volumetric test measures offer a proven solution. Many Seraphin® test measures remain in use today, decades after first being placed in service. The de facto industry standard for fuel metering applications, Seraphin® boast unsurpassed quality, accuracy and reliability. Each Seraphin® measure is backed by decades of solid performance and reputation.
|
|
Description:
The CO.RA. DOSING SYSTEM allows the discharge of the product in a closed cycle drum. It is composed of an electronic weighing system and a DOUBLE VALVE. The vane of the latter transfers a large quantity of product while the rotor completes the requested dosage.
|
|
|
|
|
|
Controlled Discharging System for Iris Diaphragm Flow Control Valves
Features / Benefits:
Actuation of iris valves where individual valve actuators are not cost effective or efficient.
Eliminates reliance on manual tools to open valves.
Eliminates worker direct exposure to the product.
Increases worker safety in situations where access to the iris valve requires an operator to climb up a ladder/platform or reach on the ground.
Can be installed as an independent discharge station for bins, drums, bulk bags, or retrofitted to existing equipment, (lifters, tablet press, bottle fillers, etc.), including integration controls.
Can be set to work on a variety of containers and valve sizes in one package.
Control packages range from simple powered open/close to fully automated systems with preprogrammed open/close, and dosing systems.
All contact materials are T-316L stainless steel with a mirrored polish. All non-contact exposed parts are T-304 stainless steel.
Control system allows for repeatability of activities that can be validated.
Standard Packages:
iValve™ Dosing System - basic package:
This package includes the powered opening system with a control package of powered open/close that is manually controlled with pushbuttons and joysticks. This system is configured to work on a single size and type of iris valve that is oriented in the same location on each container.
|
|
The metering task becomes increasingly easier. Pre-mounted complete solutions made by ProMinent are immediately available and ready for the use in important applications. Sensor technology, controllers and metering pumps form a unit with the necessary tanks and are ready for operation without installation work.
Metering systems have three main advantages compared to single components:
* Only one supplier and contact partner
* No interface problems between single components
* No own mounting works necessary. On demand, the whole system will be supplied as premounted and ready for operation or it will be commissioned by our technicians at the spot.
|
|
Superior resist handling
The use of high-torque, stepper motor technology results in a consistent controllable discharge volume. The discharge volume is not affected by changes in viscosity or by filter performance. Repeatable accuracy of 0.3% of the discharge volume is maintained at all times.
* Repeated precision: ±0.3% (F.S.)
* Linearity: ±0.5% (F.S.)
* Resolution: 0.01 ml or below
High Purity
The pump end utilizes a tubephragm design eliminating dead volume and low velocity areas where resist can stagnate. This prevents the collection of particles and allows the pumps to maintain the highest purity possible.
Flexibility in Applications
The discharge velocity as well as volume are easily adjusted to expand the capabilities to many resist-coating processes, including the application of small amounts of resist in a short period of time.
|
|
DATRON PR 1750
Versatile and flexible
With the volumetric dispensing systems PR 1750 DATRON offers a precise 3 axes portal system of a modular and compact set-up. Innovative axial systems combined with a special control system result in high dynamics. Dispensing speeds up to 20 m/min (333 mm/s) can be achieved. The user-friendly set-up as well as special dispensing accessories ensure minimum setup and programming times and thus high economic efficiency.
|
|
Located in Rochester Hills, Michigan with additional offices around the world, Ingersoll Rand Dispense Systems creates turnkey systems for automatic and manual dispensing applications. Our complete dispensing solutions are configured from standard components to meet customer specific requirements for applications within many different industries.
|
|
|
|
|
|
In the perfume and aroma industries there has been no satisfactory solution up until now for the accurate mixing of substances in powder form. When powders clot or form dust, this can lead to weighing errors, blocked valves etc. resulting in frequent production downtimes. And this is not even including the problematic conditions for safety at work due to the dust emissions.
With increasing frequency we were being asked by customers for powder dosing systems that would apply the dosing technology know-how for which our company is renowned, since FRICKE systems were mainly developed up until now for use with liquid substances.
Thus, the FRICKE PD1 powder dosing system was especially designed for use with the powders of the perfume and aroma industries. The system is equipped with a 4 kg scale (dissolution per 1 mg) and automates the production of 20 powder components.
The powders are stored in tightly sealed stainless steel containers with a 10 litre capacity. The containers can be equipped with different dosing elements and agitators according to the various powder characteristics. This allows a clot-free as well as dust-free processing of the powders - neither personnel nor machine systems are subjected to emissions.
|
|
Powder feeders can be supplied in all size ranges to suit the individual application.
The design incorporates an anti 'bridging' devise to ensure uniterrupted flow.
Additives such as iron oxide, starch, vein seal, etc. have been successfully applied with this unit.
Capable of feeding various powders into the mixers such as iron oxide, vein seal, starch, etc.
|
|
|
|
|
|
Economical, Easy-to-Use Quick Disconnect Chemical Dispensing System
The DrumQuik® PRO chemical dispensing system from Colder Products Company provides safe, easy and economic extraction of chemicals from drums, jerry cans and other bulk transfer containers while helping to reduce costly spills, contain hazardous fumes and enhance workplace safety. The easy-to-use, closed-system design combines into one integrated unit a recyclable bung closure and dip-tube with a reusable quick disconnect coupler, ensuring that both sides are sealed from point-of-origin to point-of-use.
With DrumQuik PRO, users easily dispense chemicals by removing a shipping plug and then locking the coupler in place. This eliminates the need to install, remove or clean a dip-tube, minimizing the potential for fluid or vapor contact while allowing fast changeovers.
No special tools are required to connect the coupler to the system. Clean-up and disposal are easier, because the low-cost drum insert and dip-tube are recyclable. The quick disconnect coupler can be easily rinsed and cleaned for reuse.
Ideal for single-use applications, DrumQuik PRO is made from FDA-approved polyethylene material that is compatible with most general chemical uses.
|
|
|
DOPAG single component pumping and metering systems are assembled from DOPAG pumps, components and high-performance electronic computers, producing systems that will pump and meter single component media with maximum precision.
|
|
|
|
|
|
Micro feeders Fine dosing SPA are probably the first on the market to reach such levels of excellence in term of accuracy, short dosing time and flexibility.
The ingredient is dosed in a small swiveling bowl fitted on an accurate load cell. Sensitive parts as motor reducer and scale are installed in a protective casing.
The integrated batch controller optimizes coarse and fine feeding with automatic tolerance control.
Fine dosing concept allows a ratio between coarse/ fine feeding over 30. This figure is a key point to reach fast dosing process and accuracy.
In automatic version, at the end of dosing stage the bowl rotate 360°. The ingredient is then emptied to the application point.
Fine dosing SP A
Quality of measure : 0.02 gram
Standard deviation of dosing : around 0.05 g
Dosing time : from 3 sec.
Fine dosing SP AA
Quality of measure : 0.001 gram
Standard deviation of dosing : around 0.02g
Dosing time : from 3 sec.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more details see pdf data sheet
|
|
Economy models in the 111 Series hold from 30 to 90 cubic feet of loosefill. Heavy-duty 211 Series deluxe models have 60-160 cu.ft. capacity.
Dispensing valve choices are the Square Valve® with a 49-square-inch opening and the six-inch Scissor Valve which rotates 360 degrees. Additional valves and tubing are available.
Streamline packing operations. A FLO-PACKER® dispenser eliminates loosefill waste by automatically returning overflow material into its storage bag for reuse. The FLO-PACKER dispenser's 140 cu.ft. capacity means fewer refills, and the auto return lets dispenser bags be filled without lowering. Stand-alone unit adapts to any packing line. Just put it in place, plug it in and it's ready.
|
|
DX-250 Series Digital Dispensers/Controllers
The DX-250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and material waste control. User friendly firmware provides quick and easy setup function.
|
|
Mikros™ Dispensing Pen
The Mikros Dispensing Pen minimizes waste when making microdeposits of 2-part epoxies and other assembly fluids with short working lives.
The unique 0.25cc reservoir tips are smaller than standard dispensing components and reduce production costs by allowing fast-curing materials to be mixed in smaller batches and consumed before pot life expires. The tips are available in three different sizes to handle a range of fluids and dispensing applications.
When used with an EFD air-powered dispenser, the Mikros Pen will produce consistent fluid deposits as small as 0.007" in diameter.
|
|
Patented FoamMix systems produce foamed material from a variety of flowable sealants, incuding silicones, urethanes and plastisols at elevated or ambient temperatures.
|
|
The Mikros Dispensing Pen minimizes waste when making microdeposits of 2-part epoxies and other assembly fluids with short working lives.
The unique 0.25cc reservoir tips are smaller than standard dispensing components and reduce production costs by allowing fast-curing materials to be mixed in smaller batches and consumed before pot life expires. The tips are available in three different sizes to handle a range of fluids and dispensing applications.
When used with an EFD air-powered dispenser, the Mikros Pen will produce consistent fluid deposits as small as 0.007" in diameter.
|
|
Chlorine gas dosing
VACUTROL
Change-over device (CHANGOMAT)
DOSITROL
Vaporator with safety device CSE
Our chlorine gas dosing systems are based on the vacuum safety principle and comply with the latest German safety regulations. Qualities such as the state-of-the-art standard of safety and corrosion resistance combined with only little maintenance to be done, contribute to the most distinguished reputation of our systems in the entire world.
|
|
We offer storage and dosing stations for all kinds of chemicals and application.
For example:
Dosing systems for phosphate elimination
Neutralization systems
Water treatment systems
Waste water treatment systems
Cooling water treatment systems
|
|
The SILCO-MIX range of systems are compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to continuously apply medium to high viscosity multiple component silicones with a fixed mixing ratio of 100:100.
The material can be abrasive as well as filled.
The material is supplied by feed pumps from original drums.
|
|
|
|
|
|
“HIGH-PRESSURE DOSING MACHINES”
The use of high-pressure technology offers many and significant advantages:
· chlorinated solvents are no longer required
· improvement in working conditions
· safeguarding and protection of the global environment
· more efficient production processes
· foams with higher quality and better physical and mechanical properties
· significant raw material saving.
“LOW-PRESSURE DOSING MACHINES”
Cannon low-pressure machines can solve the production problems of the small and medium-size business, being very well conceived and at the same time having advanced technical and technological content.
Their use has certainly been shrunk by the advent of more modern techniques and equipment, however the specific nature of some applications (low outputs, small production volumes) requires features, that only the low-pressure foaming process can offer.
For those reasons and also thanks to the development of alternative and more ecological washing systems based on chloride-free solvents, the low pressure technology it is still nowadays the most suitable, competitive and some times, the only possible solution.
Cannon basically offer a complete range of machines, which can be used in a wide range of different foaming processes:
· general purpose low pressure units
· micro shots and low output units
· high output units
· specialties - specific application niches do not only require to meter and mix polyurethane formulations, to meet these particular needs Cannon engineered dedicated mixing heads, dosing equipment and processes able to pour other type of mixture with different physical properties such as silicone, elastomers and epoxy resins.
|
|
|
|
|
|
All the different types of FRICKE dosing systems are based on the same high quality technology and equipped with a uniform Software. This guarantees maximum compatibility and, as a result, high profitability.
Each machine offers you the most varied possibilities and combinations to improve your production process. One system can be equipped with different size valves to achieve a maximum in speed and accuracy. Productivity is further increased by the use of several scales in one system.
- dosing valves with a 60 l/min. flow speed
- up to 16 fully automatic mixing recipes during the unattended night shift
- scale sizes: 300/600 kgs
- parallel dosing on several scales
- valve sizes from DN 15 to DN 32
- fast adaptation to dosing containers between 75 litres and 600 litres
- barcode assisted dosing
- individual container transport systems
- integrated, environmentally sound extraction system directly at the dosing point
- various storage concepts
- stainless steel pipework
- stainless steel storage tanks
|
|
Dosing Computers Types EK
- Dosing computer for the addition of EXADOS dosing solutions against corrosion
and to prevent scaling
- Volume-controlled
- Dosing capacity 100 ml/m³
- Pipe-mounting or wall-mounting
- Displays for operation, dosing and empty-alarm
- Type EK 6 complete with 3-liter-bottle
- Types ES and EGS with suction lance
- Nominal pressure PN 10
- DVGW-certified
|
|
ECO
Micro-jet dosing systems for:
- lubro-cooling substances for processes like shearing, drawing, drilling, tapping, cutting, etc.
- lubrication of particular kinematic mechanisms and/or components
Products: lubricating oils, evaporable oils, cooling liquids, detaching fluids, protective coatings, etc
|
|
Distik
Dispensing technologies for:
- volumetric or time-pressure-based micro-dosing systems for industrial adhesives on components, within automated and semi-automated assembling lines or processes.
Products: cyanoacrylate, UV, anaerobic, acrylate, polychloride, vinyl, etc.
Product lines:
- DISTIK
- DISTIK SILICONE
|
|
|
|
