|
|
|
|
|
|
Series E Hand Held Test Measures:
The Seraphin® Series E test measure is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 40 liters (10 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available. Seraphin® no longer manufactures terneplate test measures (see news and events). Our hand held measures provide a true standard of comparison for verifying the metered output of liquid dispensing equipment. They are ideally suited for fuel dispensing and other precision liquid metering applications.
A Seraphin® test measure is easy to use, reliable, low cost way to measure the output accuracy of liquid metering equipment. They are built and calibrated to the latest OIML R-120, API and NIST handbook 105-3 standards. Seraphin's® test measures have served as the filed standard used by most Weights and Measures authorities since 1915.
The Seraphin Advantage:
Whether you need to ensure compliance with Weights and Measures requirements, or are looking to support ISO requirements for meter calibration, or simply wish to maximize the economics of your metering application, Seraphin® volumetric test measures offer a proven solution. Many Seraphin® test measures remain in use today, decades after first being placed in service. The de facto industry standard for fuel metering applications, Seraphin® boast unsurpassed quality, accuracy and reliability. Each Seraphin® measure is backed by decades of solid performance and reputation.
|
|
|
DOPAG single component pumping and metering systems are assembled from DOPAG pumps, components and high-performance electronic computers, producing systems that will pump and meter single component media with maximum precision.
|
|
|
|
|
|
Parker’s RB9 Multi-Function Flare Valves are used as service valves in mini-split heat pumps. The valves isolate sections of a system for servicing and provide a means for charging refrigerant into a unit. The valve also holds a restrictor and screen to meter refrigerant and filter debris, increasing system efficiency.
* Inclusion of a restrictor into the valve provides precise refrigerant metering to increase efficiency.
* Noise and vibration through the unit are reduced by inclusion of the restrictor into the valve.
* Inclusion of a screen into the valve filters dirt and debris prior to entering the restrictor, maintaining full flow and enhancing performance.
* Captivated stem-design holds the stem within the valve to prevent it from releasing when the cap is removed or the unit is serviced, reducing the potential for injury.
* Combined functionality of valve, restrictor, and screen reduces component inventory (shut-off valve, field-access gage port, expansion device, filter screen or strainer, line-set connector, check valve, by-pass circuit, & capillary tubes) leading to a reduction in overall installed cost.
* Combined functionality of valve, restrictor, and screen also reduces space requirements within a unit and eliminates braze joints to reduce potential leaks paths.
|
|
|
This WOLFANGEL® unit was conceived for the vacuum infusion process, where, at the beginning of the process, a great amount of material is required. The capacity is 50 kg/min. Resin, catalyst and accelerator (or inhibitor) are delivered by 3 material pumps. The particular advantage of this plant is that it can process preaccelerated resin. The reaction process of the resin system can be adjusted to an optimum to the temperatures of the environment so that the possibilities of adjustment are improved compared to a preaccelerated system. This concept can also be used for epoxy dosing units.
|
|
Technical Data:
-Steel frame, zink plated
-Rollers
-Balancer
-Mixing block
-Pneumatic control
-Stainless steel piston pump
-Swivel boom made out of stainless steel
|
|
| ... products without technical information |
| |
|
|
|
|
Precision High Voltage Measurement Instruments VOLTpoint is a family of precision instruments designed for measuring a wide range of voltage inputs; ideally suited for cell-by-cell battery testing where sources range from millivolts to ±400V. Available in both USB and Ethernet (LXI) versions, VOLTpoint can be configured with 8, 16, 24, 32, 40, or 48 input channels. Each VOLTpoint instrument ships with a ready-to-measure application, allowing you to view, graph, and export your data. VOLTpoint uses ISO-Channel™ technology to eliminate connection problems by using galvanic isolation methods to guarantee 1000V isolation between sensor grounds.
VOLTpoint USB Instrument
DT9873: Precision Voltage Measurement Instruments for USB
* Dedicated 24-bit, Delta Sigma A/D converter for each voltage input channel for simultaneous, high-resolution measurements
* ISO-Channel™ – 1000V galvanic isolation channel to channel and to the host computer to protect signal integrity
* Sampling rates up to 10 Hz per channel
* Measurement Instruments Application and programming examples included
|
|
|
|
|
|
TEMPpoint™ is a series of temperature measurement instruments designed for high accuracy and industrial robustness. TEMPpoint utilitzes ISO-Channel™ front end architecture to eliminate common mode noise and ground loops through 1000V channel to channel galvanic isolation. These instruments allow direct thermocouple, RTD, and precision voltage or resistance measurements with a PC. Temperature and voltage values can be viewed, graphed, or exported to Excel, and allow limit checking for control or monitoring of a manufacturing process. USB and Ethernet (LXI) versions are available with 8, 16, 24, 32, 40, or 48 channels
TEMPpoint Ethernet (LXI) Instruments for Thermocouples
DT8871U: Highly Accurate Thermocouple Temperature Measurement Instruments
* 8 to 48 simultaneous differential inputs per instrument
* Connect any thermocouple or voltage directly at the front panel
* Galvanic Isolation Channel-to-Channel ±500V
* TEMPpoint datalogger application, programming examples, and web-based application included
|
|
USB 1MS/s, 16-bit multifunction module with BNC inputs
- 1 MS/s 16-bit A/D converter
- 16 BNC differential analog inputs, with 7 programmable input ranges from ±100 mV to ±10 V full scale
- Over-sampling mode, including line-cycle rejection for low-level voltage measurements, even in the presence of AC power line noise
- 1 MS/s, 16-bit analog outputs
- 16 digital I/O
- 4 counter inputs capable of measuring frequency, period, pulse width, or quadrature encoders up to 20 MHz
- 2 timer outputs
|
|
|
The E-PDISO16 has one built-in 10/100 BASE-T auto-negotiation, high-speed communication port. With the Ethernet interface, you can remotely access and configure your E-PDISO16 from anywhere on the network. Only one computer can control the E-PDISO16 at one time. The networking protocol is TCP/IP. You can send your data over 100 meters at data speeds of up to 100 Mbps using only one Ethernet cable connected to your computer.
|
|
|
|
|
|
Measurement Computing today announced the release of three new 1-MHz, 16-bit multifunction USB data acquisition devices, and a cost-saving expansion module for high channel count applications. The USB-1616HS, the USB-1616HS-2, and the USB-1616HS-4 deliver outstanding performance with synchronous analog, digital, and frequency I/O in one compact package. The AI-EXP48 plug-in expansion module coupled with any of the USB-1616HS series modules can quadruple the analog input channel count.
The USB-1616HS series modules have a unique, low-latency control output mode, whereby any input—analog, digital, or counter, can control an output—digital, analog, or timer, based on pre-defined limits, including hysteresis. The outputs are controlled directly from the USB-1616HS series module, and do not require PC intervention. This results in response times that are measured in microseconds instead of milliseconds
The USB-1616HS series offers extensive trigger options, ranging from analog trigger with 1 µs max latency, to multichannel triggering, where any combination of analog, digital, and counter input channels can be combined to initiate the trigger. Other trigger modes include digital pattern, level, edge, inside/outside window, and pre- and post-trigger.
|
|
Prover
For all flow meters and volume meters
Inspection cycles
Master meter test equipment
Calibrated vessels
Stationary and mobile versions
Equipment for calibration and inspection authorities
Skid-mounted units for field service operation
Automatic sequencing and report generation
|
|
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
| ... products without technical information |
| |
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are “Made in Germany”
|
|
Alcatel Vacuum Technology is proud to introduce the Adixen 2000 vacuum measurement series, blending experience and innovation.
The 2000 gauge series provides pressure measurement from atmosphere down to 4.10-10 mbar. The Adixen gauges and controllers give you more than a simple pressure measurement, connected to a network with 2 set-points, 0-10 V or RS 485, the gauges can drive a production process or record the pressure trend and more.
|
|
Many vacuum applications operate only in a specific pressure range. Analog and digital total vacuum or pressure measurement instruments are employed to measure and control the total pressure in a vacuum system. Pfeiffer Vacuum offers you three different lines of total pressure gauges.
|
|
|
Spring-pressing automatic equipment. It can be combined with different elements: vibrator, further pressing systems, camera for image analysis, dynamometer measuring both power and/or position, multi-way sorter.
|
|
|
|
|
|
Optical metrology equipment for climatologists and meteorologists
The laser ceilometer from JENOPTIK Laser, Optik, Systeme GmbH measures such atmospheric parameters as cloud height, visibility and the height of a planetary boundary layer. The product provides the first ever metrological device to safely detect also cloud layers and cirrus clouds at height levels up to 15 kilometers. This marks a major progress in the science of meteorological and climatologic forecasting. Measurement is accomplished with an opto-electronic laser sensor that relies on the LIDAR principle, an optical version of radar: A solid-state laser emits light pulses into the atmosphere. The light which is scattered by air and aerosol molecules is collected with a specific optical setup to be detected by a highly sensitive photo receiver (APD). By analyzing the pulse transit time and the intensity of backscattered light portions, smart algorithms compute a high-resolution aerosol height profile along with other related measurement readings. With integrated heating and cooling functionality and designed for autonomous operation, the CHM 15k can be relied to perform in any weather conditions.
|
|
| ... products without technical information |
| |
The Electrical Instrumentation Tester, (EIT) is ideal for testing:
• Multi-Functional Testers
• Loop Testers
• Insulation Testers
• Continuity Testers
• Multi Meters
• Voltage Indicators
• 16 & 17th Edition Instruments
EIT Features:
• Continuity Test: (resistance measured in ohms Ω)
• Voltage Test: (line AC voltage check)
• Insulation Test: (resistance in MΩ Applied Voltage 100V to 1KV)
Features cont: EIT has a LCD Display to indicate the selected test
• Loop Test: (phase to earth & P-E +1 Ω)
• RCD Test: (LCD indicates Over current and mA Trip value, RDC
Tests are 15mA/30mS, 100mA/45mS, 30mA/100mS,
10mA/150mA)
|
|
|
|
|
|
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|