|
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
Stainless steel balanced spool valves apply uniform amounts of thick materials like greases and silicones at pressures up to 2500 psi.
To keep dots and lines consistent and prevent drooling between shots, the 736HPA valve uses an adjustable stroke control to regulate opening surge and closing snuffback.
|
|
Corrosion-Proof Six mm PTFE Needle Valves
Aalborg® has announced the release of its VT6 6mm PTFE Needle Valves. Simplicity of
design (only 6 components) assures minimal sources of leakage, quick disassembly, and
easy maintenance.
Ideal for relatively high flow ranges while maintaining linear, repeatable flow rate
performance, the VT6 can be used in pressure, non-critical vacuum service, or as shut-off
valves. The unique radially compressed PTFE o-ring feature allows quick compression
adjustments without disassembly.
PTFE and PCTFE materials make the VT6 Valves reliable choices for laboratory and
industrial applications requiring corrosive gas and liquid regulation or high-purity service.
Design Features Include:
- Rigid PCTFE valve spindles virtually eliminate "creeping."
- Panel Mountable.
- 3/8" FNPT ports.
- Fluids contact only PTFE/PCTFE materials.
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
|
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
|
|
|
The 754 aseptic valve features a smooth fluid flow path that is free of entrapment areas. FDA-compliant wetted parts are made of 316L Stainless Steel and Teflon(*), making the valve suitable for Clean-in-Place and Sterilize-in-Place processes.
|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
The model DV509 diaphragm valve is designed for precise flow control of low to medium viscosity liquids with a minimum shot size of 0.0001cc. The diaphragm separates the wetted parts from the air supply which makes it suitable for dispensing cyanoacrylates, reagents, anaerobics, UV adhesives and resins, paint, ink, solvents, glue, electrolytes, alcohols, and other volatile substances.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Minimum shot size 0.001cc
• Suitable for machine integration
• Will dispense hazardous materials
• Has a high cycle rate of 500 shots a minute
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
The Dispensit® Model 4104a dispense valve controller operates a dispense valve by controlling time, cycle speed, cycle sequencing, system pressure, and reservoir pressure.
Features:
- Electronic dispense cycle counter
- Automatic mode
- Purge mode
|
|
When a precise automatic dispensing timed shot is required, these popular units provide a simple and economic solution to liquid dispensing. The JB1113-LF can be activated by a foot pedal or finger switch to dispense materials supplied in syringes, such as SMT solder pastes, no-clean flux, adhesives, welding creams, thermo-conductive adhesives, etc.
Features
• Manual or Timer Operation Modes
• Foot Pedal or Finger Switch Controlled
• Programmable Digital Timer 0.01 - 31 seconds
• Suck-Back feature ensures no dripping
• Wide range of applications
• Low-cost system with high reliability
• Complete with an accessory dispensing kit
|
|
|
EFD offers a wide range of valve systems for dispensing accurate, repeatable amounts of almost any assembly fluid, from thin solvents and adhesives to thick RTV sealants and brazing pastes.
|
|
General-purpose valve for use with a wide variety of medium to high-viscosity fluids. A slight snuffback at the end of the dispensing cycle prevents dripping between shots.
For use with:
- Brazing pastes
- Epoxies
- Greases
- Paste fluxes
- RTVs/sealants
|
|
Handheld dispense valves are a good choice for manual assembly applications where a timed shot is not required and a relatively large amount of fluid is being consumed.
Operation is simple and straightforward. Fluid is supplied to the valve from a pressurized 1 liter or 5 liter tank. To apply fluid, the operator places the dispense tip in position and presses a lever on the side of the valve. Releasing the lever stops the flow with a fast clean cutoff.
725-HL Handheld piston valve for medium to high viscosity fluids
752V-HL Handheld Diaphragm Valve for low-to medium-viscosity fluids like cyanoacrylates and anaerobics
740V-HL Handheld needle valve for low-viscosity fluids like solvents and MEK
|
|
Stainless steel balanced spool valves apply uniform amounts of thick materials like greases and silicones at pressures up to 2500 psi.
To keep dots and lines consistent and prevent drooling between shots, the 736HPA valve uses an adjustable stroke control to regulate opening surge and closing snuffback.
For use with:
Greases
RTV's
Sealants
Silicones
|
|
The VC-1195A is a 4-way dispensing valve controller that can be used to control one or two dispensing valves with dual air ports for 4 way pneumatic operation simultaneously. The secondary air input will close a valve faster than using the valve's internal return spring, providing an increase in speed and suck-back.
Features
• Improves a valve's operational speed and suck-back
• Increases shot size accuracy
• Simultaneous control of two valves
• Timing interval from 0.01 to 31 seconds
• Fast response internal pneumatic solenoid
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
|
|
|
|
Parker’s RB9 Multi-Function Flare Valves are used as service valves in mini-split heat pumps. The valves isolate sections of a system for servicing and provide a means for charging refrigerant into a unit. The valve also holds a restrictor and screen to meter refrigerant and filter debris, increasing system efficiency.
* Inclusion of a restrictor into the valve provides precise refrigerant metering to increase efficiency.
* Noise and vibration through the unit are reduced by inclusion of the restrictor into the valve.
* Inclusion of a screen into the valve filters dirt and debris prior to entering the restrictor, maintaining full flow and enhancing performance.
* Captivated stem-design holds the stem within the valve to prevent it from releasing when the cap is removed or the unit is serviced, reducing the potential for injury.
* Combined functionality of valve, restrictor, and screen reduces component inventory (shut-off valve, field-access gage port, expansion device, filter screen or strainer, line-set connector, check valve, by-pass circuit, & capillary tubes) leading to a reduction in overall installed cost.
* Combined functionality of valve, restrictor, and screen also reduces space requirements within a unit and eliminates braze joints to reduce potential leaks paths.
|
|
|
Porter Metering Valves are designed for extremely precise control in low flow gas and applications. They are available as valve cartridges, integrally mounted in flowmeters and inline valve assemblies with straight or angle patterned valve bodies. All inline valve assemblies have 1/8" female NPT inlet and outlet ports.
|
|
The Dispensit® Model 1055/1095 is a controlled-flow metering rod valve, designed to produce precise beads of materials of nearly any viscosity.
Features:
- Controlled flow positive displacing metering valve
- Simple control
- Precision hydraulic flow control
|
|
60% smaller and 70% lighter than typical dispense valves, the 702 Series is ideal for applications where space is tight or installation on movable arms where size and weight must be considered.
For use with:
- UV- and light-cure adhesives
- Resins
- Solvents
- UV coatings
|
|
The MV-0810NM-A needle valve is designed for precision dispensing of all types of fluids in minute to moderate shot sizes. Its pencil-type grip makes the valve suitable for either hand held or automatic applications. Shot sizes may be fine tuned by turning the adjuster at the top of the needle valve.
Features
• Available in Stainless Steel and Plastic
• Stroke adjustment to fine-tune shot size
• Lightweight design for hand-held dispensing
• Positive shut-off
• Micro-shot deposits
|
|
Precision needle valve applies low-viscosity fluids in accurate, repeatable amounts. Because the stainless steel needle seats in the tip adapter, there is virtually no dead fluid volume between shots.
For use with:
- Accelerators
- Marking inks
- Silicone oils
- Solvents
- UV-cure adhesives
|
|
The VDP150 precision volumetric dispensing pump is a pneumatically operated positive displacement valve designed for constant volumetric dispensing of low to medium viscosity fluids. The double acting metering valve has a volume range of 0.005cc to 0.015cc.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Suck-Back eliminates post-dispense "dripping"
• Dispenses accurate micro-shots of 0.005 to 0.015cc
• Integral inlet/outlet check valves
• Positive Displacement metering
|
|
EFD’s Radial Spinner System makes it easy to apply neat, consistent bands of low-to mediumviscosity fluids inside cylindrical parts between 0.4” and 5” in diameter.
Compact size and precise control make the Radial Spinner System ideal for processes where fluid must be applied inside small cylinders or confined to specific locations and kept off surrounding areas. Inert wetted parts make the system ideal for use with reactive fluids like cyanoacrylates and anaerobic adhesives.
The Radial Spinner System includes a precision dispense valve, air motor, bracket, valve/motor controller, disc assembly and dispense tip. Disks and tips are available in different sizes to meet a wide variety of applications.
|
|
Spray rinse valves are used to clean the inside of vessels or reactors without having to open or close them. Water, steam, solvents and anti sticking agents can be used and are sprayed in a distinct and efficient manner in the vessel.
Fetterolf Corporation invented the Spray Rinse valve in 1983 and since then has become a world market leader in this segment. The valves are frequently used in the Plastics and Polymer (especially PVC) industries and by pharmaceutical companies
SchuF Fetterolf provides two separate types of spray rinse valves - with spray slots in a rotating head or with nozzels in a linear head.
|
|
Deltrol Controls Boiler Dispense Valves are direct-acting, gravity fed (up to 0.2 bar) valves designed primarily for vending applications. They are used to dispense water or similar media from a boiler tank.
Deltrol Controls offers an extensive standard product line, as well as the ability to design custom models for unique applications.
Contact one of our sales engineers to discuss your specific application
Phone: (01) 414 671 6800
Fax: (01) 414 671 6809
Email: brian-cahill@deltrol.com
Website: www.deltrol-controls.com
|
|
| ... products without technical information |
| |
|
|
