|
|
Series E Hand Held Test Measures:
The Seraphin® Series E test measure is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 40 liters (10 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available. Seraphin® no longer manufactures terneplate test measures (see news and events). Our hand held measures provide a true standard of comparison for verifying the metered output of liquid dispensing equipment. They are ideally suited for fuel dispensing and other precision liquid metering applications.
A Seraphin® test measure is easy to use, reliable, low cost way to measure the output accuracy of liquid metering equipment. They are built and calibrated to the latest OIML R-120, API and NIST handbook 105-3 standards. Seraphin's® test measures have served as the filed standard used by most Weights and Measures authorities since 1915.
The Seraphin Advantage:
Whether you need to ensure compliance with Weights and Measures requirements, or are looking to support ISO requirements for meter calibration, or simply wish to maximize the economics of your metering application, Seraphin® volumetric test measures offer a proven solution. Many Seraphin® test measures remain in use today, decades after first being placed in service. The de facto industry standard for fuel metering applications, Seraphin® boast unsurpassed quality, accuracy and reliability. Each Seraphin® measure is backed by decades of solid performance and reputation. |
|
Complete mobile systems can be trailer or truck mounted. This is a general purpose type prover presently being used in the gas and petroleum industries. It could be adapted or modified for use in other industries as well. A range of sizes, up to 1500 gallons, can be produced.
An example of a trailer mounted prover is the 100 Gallon Volumetric Liquified Petroleum Gas Prover. This prover is in use by a State Bureau for the purpose of accurately measuring and checking flow meters and gauges. It is mounted on a trailer for maximum mobility and convenience for transporting the unit to inside or outside mounted meters. It can be used to check meters measuring LP (liquid petroleum gas) being loaded into the truck and or those meters measuring the gas as it is dispensed from the vehicle.
Any standard, or custom measures, or provers can be trailer or truck mounted to your specifications and for all industries whether it's for in-yard or over-the-road purposes.
Custom trailers meet all I.C.C. regulations. They can be equipped with brakes and can be leveled by jack screws or hydraulic jacks. Dual axles are available where required.
Benefits of the CMS Prover Systems are directed towards manpower and human resource savings which provide increased productivity, safety, visibility and ease of operation. Added results, improved customer relations. |
|
Damped oscillatory waves are phenomena associated with the opening and closing of High Voltage (HV) busbars in power transmission stations. The physical environment influences the fundamental oscillation frequency and repetition of the impulses. Repetition frequencies are dependant on the power frequency and distance between contacts. For gas insulated stations this could be up to 5kHz.
The new IEC61000-4-18 standard introduces additional fast damped oscillatory waves at frequencies of 3MHz, 10MHz and 30MHz. These are for testing of signalling and control equipment installed in Gas Insulated Substations (GIS) where the transients occur in metallic enclosures containing SF6 gas.
MIG-OS-OM-EXT has been designed to add fast oscillatory wave capability to existing EMC Partner generators.
MIG-OS-OS1 and MIG0603OSI generators deliver 100kHz and 1MHz slow damped oscillatory waves that were previously included in the IEC61000-4-12 standard.
As the application is for power distribution stations, the equipment to be tested is generally connected to 3-Phase power lines. CDN3000-06-25 (manual) and CDN3000A-06-25 (automatic) enable coupling of both fast and slow oscillatory waves. |
|
Simply the best HARMONIC and FLICKER test system available today. HAR1000 does not require expensive and bulky AC sources, it uses a novel technique to provide active compensation of distortion on the national power mains.
Featuring dual analysers, the input and output signal are constantly monitored to ensure compliance. HAR1000 conforms to the latest IEC61000-3-2 Edition 2 but also allows testing to previous standard editions.
HAR1000 can be enhanced with the following accessories.
HAR-EXT1000, three phase system
Adds two further phases to the HAR1000. Simple connection without any hardware modifications mean this powerful extension can be added at any time to an existing single phase system.
HARCS Immunity software
This package can be added to both the single and three phase systems. It extends the system’s emission capability to include power line immunity tests such as harmonic immunity according to IEC61000-4-13, voltage fluctuations according to IEC61000-4-14 and ripple on DC according to IEC61000-4-17.
Adding the EMC Partner PS3, allows testing to IEC61000-4-28 for frequency fluctuations.
|
|
SYS61K
Compliance Test System for Harmonics IEC 61000-3-2 and Flicker IEC 61000-3-3
Application:
Evaluation system for testing devices generating harmonics and flicker
according to IEC 61000-3-2 and IEC 61000-3-3 (CE-Conformity)
- Modular structure, 1 to 3 phases realisable with the LMG95 or LMG500
- Power sources up to 5kVA per phase
- Existing customer owned power sources may be implemented, even for systems wich are discontinued in availability and support by their manufacturer e.g. HP/Agilent and others
- Inputs to register additional process values
- Improved analysis by means of integrated statistical and regression algorithms
- Auxiliary measuring signals to find the reason for harmonics and flicker
- EN61000-3-2/A14
- Consulting partnership in standardization commitees assures precocious support of newest standards, to be upgraded via internet
- Easy to control with powerful evaluation software |
|
| California Instruments cabinet systems are carefully designed and manufactured to provide maximum system performance and reduce installation cost. The various elements that make up an integrated high power AC test system are carefully assembled in a high quality 19 inch cabinet. All input and output wiring is properly sized and routed for optimal performance and safety. Configuration problems or wiring mistakes are eliminated when ordering a cabinet based multi-box power system like the 15003iX or a three phase compliance test system like the 30003iX-CTS. This translates into faster setup time and reduced installation hassles upon receipt of your power system. |
|
UE RAS: REMOTE ACCESS SENSOR - When remote sensing or access is an issue. Easy to install & simple to use.
RAS-MT REMOTE ACCESS SENSOR - Magnetically mounted contact probe with cable and remote access module (RAM) for testing consistency and for hard to reach test points. RAS-MT is included with the Ultraprobe 10,000 Inspection System and is an optional accessory for the Ultraprobe 9000.
UE MMP-7, UE MMP-8 & UE MMP-2U: MAGNETIC MOUNT PROBES - Magnetic Mount Probe with transducers and male connecting pins for attachment to the STM-2, STM-9 or STM-1 stethoscope modules. |
|
| Testing of Electricity Metering equipment, takes many different forms. Apart from accuracy and stability, meters must also be tested against interference conducted on the elctricity cables. This can be in the form of impulses generated by lightning events, switching action in the mains network or insulation breakdown. EMC Partner specializes in designing test equipment to meet the international standards for impulse testing of energy meters. IEC61036 and IEC62052 are typical standards for class 1 and 2 metering equipment. |
|
| Self-adjusting fault indicator for system-wide application. Provides clear visual indication of fault path to line crews in the field to help reduce fault-locating time. Automatically adjusts its trip value based on the load current, eliminating the need to specify a trip value. Allows line crews to easily distinguish between temporary and permanent faults. The inrush restraint feature allows coordinated integration with automatic reclosing schemes. Patented Ramp Down Restraint feature prevents false activation after extended circuit outage. Distinct eight-hour temporary fault indication allows line crews to investigate the cause of self-clearing faults and successful trip and reclose operations to improve circuit reliability. |
|
| ... products without technical information |
| |
The multifunctional primary test system CPC 100, in combination with the coupling unit CP CU1, is a unique measurement system for: Line impedances and k-factors of overhead lines or power cables, Mutual coupling of parallel lines, Coupling of power lines into signal cables,
Ground impedances of large substations, Step and touch voltages.
The test system offered by OMICRON makes use of frequency shift techniques for accurate measurements regardless of electrical interference. |
|
Euro-Z 290 A adapter
High resolution and accuracy impedance measurement.
Test current up to 294 A, for testing impedance from 1 mW and Isc up to 400 kA. Euro-Z 290 A adapter is a professional portable test adapter.
In combination with one of the instruments EurotestAT, EurotestXA or Eurotest 61557 it performs high precision line and high precision fault loop impedance measurements. |
|
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software. |
|
| The ground resistance of substations can be measured with two auxiliary electrodes which are put into the ground. To avoid influences from the mains current and its harmonics, this measurement should preferably be carried out with 128 Hz.The high output power of the CPC 100 ensures a high ratio of the signal level to the noise level. Thanks to the signal processor technology, the measuring procedure is very selective and disturbances by ground currents are reduced to a minimum. |
|
Earth Testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.
|
|
Description:
Reads ground resistance down to 0.10Ohm.
- Fully autoranging with data hold to capture readings.
- Convenient alarm and 99-point memory functions.
- Measures up to 30A RMS ground or leakage current.
- Measures currents down to 1mA.
- Accessories included: (1) 9V battery, molded carrying case, test resistance loop. |
|
PART # SBS BCT-5000
DC RESISTIVE LOAD BANK (24, 48, & 120 VDC)
The only way to know your industrial batteries will perform to specification is to test them regularly. SBS's battery capacity testers enable you to test your wet or sealed batteries in a variety of ways and at three voltages. Load bank test 24V, 48V, or 120V DC systems with currents up to 171 amps. A built-in digital meter lets you read volts, amps, amp-hours, and elapsed time without having to hook up a separate meter. The display is accurate to 1% of full scale at the rated voltages. The unit also offers continuous operation, so there's no cool down needed after or between tests. Use the master load control switch to instantly apply or remove loads. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
