|
|
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. The mechanically actuated diaphragm reduces the possibility of hydraulic oil contamination of process liquid which makes this an ideal pump for water treatment applications. DC variable speed drives are available for external control and automation.
The SD & SG metering pumps offer a high level of reliability with outstanding value for applications up to 175 psi (12 Bar). |
|
| Maintaining the same size footprint of previous models, the sleek new pump offers a number of product enhancements to provide longer life and product convenience, while the physical design signifies supreme quality. The newly redesigned housing improves the drives heat transfer properties, as it generates heat farther away from the electronic components to maintain the long-term integrity of the PC Board. Electrical connector attachments have been repositioned to the front of the pump for easy access. With a new clear cover the face of the pump is shielded from exposure to corrosive substances yet lifts easily for convenient access, allowing operators to view dial settings for fine-tuning output. In addition, the pump and liquid end mounting geometries have been improved for enhanced connections. For more information please contact LMI Milton Roy |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
High discharge accuracy
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : }0.5%) By changing the angle of the pump head it is possible to freely adjust the discharge amount between 0 and maximum discharge.
Excellent corrosion resistance
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.
Dispense into a vacuum condition and removal from a high-pressure condition
Since there are no suction and discharge valves, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a solenoid. Constant-volume dispensing is also possible if suction side is pressurized.
Capable of handling slurries and highly viscous fluids
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPa„s.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPa„s or greater. Contact this company for details.
|
|
The FEM diaphragm dosing pump has been specially developed
in order to accurately dose small quantities of liquid over a long
period of time whereby two of its most distinctive features are its
compact size and robustness (pump and electronics). The FEM
pump and electronics makes a complete dosing system which
is suitable for both simple as well as complex applications. With
the functions quasi continuous flow and batch dispensing the
FEM diaphragm pump differentiates itself from pumps based on
alternative technologies eg. piston, gear, syringe and peristaltic
pumps. Other interesting features are its high reliability, a
favourable purchasing price and low maintenance costs.
KNF has developed a specially programmed electronic control
module so that the integrated solenoid valve and the movements
of the diaphragm are exactly synchronised. This results in an
exact dosing which is gentle and low in pulsation. In addition
to these unique pump characteristics the control module also
allows a wide range of control possibilities to be used eg.
serial interfaces.
The dosing pump is self priming, maintenance free and can
be run dry |
|
| Lagoon filtration system provides the removal of foreign solids or organic impurities from chemical solutions or from baths of special treatments. The group is constitued by the filtration chamber with lid, injection-moulded fittings which contain the filtration system, positioned on the base. In the same base, well protected, is situated the mag drive pump, the pipeline equipped with valves and switch. Many chambers can be assembled together either in parallel or in series connected to a bathtub in order to filter using the carbon purification process. Thanks to the spacious basement all the parts can be easily inspected. Many different versions of filtration units are available: paper, meraklon cartridges, washable pleated cartridges. Filtrating grade: between 1 and 100 micrometers having 10 micrometers as standard. |
|
| ... products without technical information |
| |
The Crystic gelcoat range has products which have been developed, tested and approved specifically for different markets and to suit the various production techniques used to make polyester composite products:
Hand- lay brush grades Sprayable grades Low VOC emission grades |
|
| 1381PA Heat & Chemical Resistant Polyester Resin Water fillable polyester resin Low styrene thixotropic spray viscosity polyester resin Polyester resin for Solid Surface Casting |
|
Epoxy ortho cresol novolac used as formulating tool for Tg enhancement and to lower moisture absorption of other Resolution resins. Used in printed wiring board, adhesives and powder coating applications.
|
|
| ... products without technical information |
| |
| Magnetic drive chemical pump type MNK/F, heavy duty design, plain bearings made of SSiC/SAFEGLIDE ® PLUS, eddy-current-free double can of CFRP/PTFE, magnetic coupling, permanent magnets of SmCo and NdFeB, impeller closed with back vanes, bare-shaft, nuts and bolts made of stainless steel, high-quality epoxy coating, inclusive test run, housing material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), technical specification to ISO 15783 and DIN ISO 5199, dimensions to DIN EN 22858 / ISO 2858, flanges to DIN EN 1092-2, ISO 7005-2, housing end pressure PN 16 |
|
Materials
Wetted parts AISI 316 Bearings SiC Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to 1000m3/h Total Delivery Heads Up to 220m Temperature from -150° to a 450°C Pressure Rating Up to PN 100
Construction
Horizontal Centrifugal Pump Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Sintered Silicon Carbide Bearings Bearing Frame and Close coupled execution
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFE Bracket WCB
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Technical Data : Flow Rates up to a 15m3/h Total delivery heads up to 70m Temperature Ratings up to 90°C Pressure rating up to PN 10
Construction
Horizontal plastic peripheral Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
3M Sorbents can be used in a wide variety of applications ranging from simple maintenance to emergency spill clean-up. Sorbents help ensure your workplace is kept clean and safe and reduce damage to the environment.
3M sorbents are designed to be used for specific jobs and materials. Some can be used for general maintenance applications while others are designed to handle petroleum or chemical spills and clean-up.
|
|
Chemical absorbents are designed to absorb almost all industrial solvents, acids and alkalis including: acetic acid, ammonia, calcium hydroxide (limewater), hydrochloric acid, hydrofluoric acid, nitric acid, perchloric acid, phosphoric acid, potassium hydroxide (caustic potash), sodium carbonate (washing soda), sodium hydroxide (caustic soda), sulphuric acid, toluene, trisodium phosphate and xylene. Chemical absorbents are colour coded green.
|
|
3S Compactoc analyzer has been designed for the automatic measurement of total organic carbon in water, on different types of matrix.
The analyzer measures Total Organic Carbon in liquid samples using the
EPA approved method based on UV persulfate oxidation and detection of
generated carbon dioxide using a Non Dispersive Infrared Analyzer. This
method meets also the requirements of European ISO/CEN guidelines.
The analyzer provides this measurements on liquid samples ranging from
0-20 mg/l to 0-1000 mg/l. The analyzer is conformed to EPA, DIN, CE, ASTM, NAMUR regulations.
Applications:
- industrial wastewater
- industrial effluents
- laboratory
- effluent and influent monitoring
- boiler feed water
- condensate and cooling water
- drinking water
- surface water
- process water |
|
COD, chemical oxygen demand, by heat digestion plus
tritration or colorimetric measurement. Detection limit
10 ppm O2.
Total-N or Total-P by heat or UV-digestion plus colori-
metric measurements. Detection limits 0,3 ppb N and
1 ppb P.
Total-CN or Total-Phenol by distallation plus colorimetric
measurements. Detection limits 1 ppb CN and 6 ppb Phenol. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.
|
|
OPERATION PRINCIPLE
Operating by batch between 2 levels. The constant concentration is designed between 50 and 150 g/l, which ensures good homogeneousness of the slurry.
Equipment :
- Tank made of HDPE
- Agitator support
- Anti-vortex blades
- Inspection door
- Water inlet line
- Floating gauge level detection
- Overflow
- Version : 1 000 L or 2 000 L
Ų Standardised and optimised design
Ų Fully equipped compact unit
Ų Easy assembly
Ų Simple operating process
Ų Ready to use
|
|
|
|
see the results for the following category