|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
| ... products without technical information |
| |
The environmentally sealed converter reduces truck battery volts to a 12 V output to supply power for vehicle lighting and accessories, including head lights, warning lights, blowers, windshield wipers and horns.
- Voltage Input Range : 24 to 48 and 72 to 80 volts
- Voltage Output : 12.5 volts DC
- Current Rating : 16 amps continuous
- Frequency : Constant - 15 kHz
- Ambient Temperature : 0° to 40° C
- Input Filter : Included for use with SCR and transistor traction controls
Features and Benefits :
- Terminals and circuitry are isolated from the converter cover - not isolated from battery input
- Thermal protection within the converter will cause the converter to operate at a reduced output in cases where it sees excessive loads, such as a continuous current draw above 16 amps, until the load is reduced
- Converter is normally energized when the key switch is closed, and ceases operation when the key switch is open
|
|
|
Designed for optimum efficiency and power density, this module achieves an ultra high efficiency rating of 91% at 3.3V full load, eliminating the need for a heat sink in most applications. Thanks to the ultra high efficiency of this converter, the power dissipation is such that for most applications a heat sink is not required. In addition, the QRW series supports future migration of semiconductor and microprocessor supply voltages down to 1.0V.
|
|
|
World-class open-frame power modules, such as the Austin Lynx and Austin Lynx II, deliver up to 10A of output current with a wide range of bonus elements. These non-isolated power modules are offered in both SIP and SMT packages and feature small footprints that are pin to pin compatible with the Austin Super Lynx and the Austin SuperLynx II modules that deliver up to 16A of output current. Extra features include remote On/Off control, programmable output voltage, over-current and over-temperature protection. The Austin Lynx II series also includes positive logic On/Off control and EZ-SEQUENCE which enables designers to implement cascade, tracking or ratio-metric power sequencing on a board.
|
|
| ... products without technical information |
| |
|
|
|
|
MC AUTOMAZIONI is glad introducing you a new machine allows to fold the top of the bag made by a vertical machine integrated with the line, here below described :
Station 1 : The bag comes fully of the products from the vertical ffs integrated with the line, bag with the top side open (not welded), the system keeps the bag on stand up position and progresses through a line with cups
Station 2 : a cold jaws takes the top of the bag and shake it in order to adjust the product inside the bag
Station 3 : A device such the air inside the bag then seal the top side of the bag
Station 4 : a rotating double-head performs the double folding of the top of the bag already welded
Station 5 : label applicator to apply a reclosable label on the top side of the bag, keeping the double fold top seal close to the bag
Details :
• Length (high) of the bag : Min 150 mm – Max 350 mm
• No pillow bag workable with this kind of machine
Optionals on request :
1. Label applicator : here above included;
2. Printer unit : not included
3. Bottom side bag label applicator : not included
4. Front / back side bag label applicator : not included
|
|
JBC2
Packaging machine JBC 2 is used for packing of tea into the flat bags with thread and label. Ready tea bags are automaticly inserded into a box. Machine drive is electomechanic. For tea preparation the cutting machine RC1 or RC 2 can be used.
Machine speed : 120 cykles/min
Bag width : 50 mm
Bag length : 60 mm
Machine weight : 450 kg
Power requirement : 1,9 kVA
|
|
Machine HV1 with one-lane linear wiegher DV1
The vertical hose packaging machine HNXB is appointed for packing the stick and cross pack. The bag is made in the machine from the roll of printed heat sealable packing material. The foil is cut up in accordance with number of tubes, after the bag forming on the tubes, and product is filled into the bags.
Machine output: max.18 cycles/min.
Bag dimension: max. width 203 mm/max. length 300 mm
Machine accessories:
- in feed conveyor PV1 with the hopper
- out feed conveyor PO1
- printing device
- device for gas flushing
- euro-hole
- dosers integration
|
|
| ... products without technical information |
| |
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
|
WEIGHBATCH is a weighing and mixing dosing integrated system. This machine is suitable to treat in particular granular plastic polymers and with other specific accessories can be used also for plastic re-grounded materials having different and not regular sizes. The construction is compact to minimize the overall dimensions and satisfy the higher feed rates. This system has been planned to serve both the extrusion processes and also the injection and moulding ones. This machine is very easy to install thanks to its self supporting structure, which allows both to fix it directly on the plasticizing well and to earth in order to serve different points. It can treat up to a maximum of 8 ingredients; The principal ingredients are dosed through electro-pneumatic controlled slide gates, while the additives are dosed through screw feeders to obtain the maximum precision.
|
|
|
|
|
|
WEIGHBLEND is an ideal system to feed in continuous extrusion lines (blown film , cast, pipes and profiles ). This system is capable of dosing in continuous up to 5 polymers having a regular particle –size and checking in automatic mode the feed rate.
The use of this system is suggested starting from very low productions of 50 Kg/h and up to productions of 800 Kg/h and more. WEIGHBLEND can be equipped with an automatic weight/meter control. This has the purpose to keep constant in the time the weight of every meter of product which comes out from the line. WEIGHBLEND is constituted by a central gravimetric hopper for the principal ingredient and maximum 4 gravimetric dosing zones for the other ones. The machine has a self supporting structure which allows to fix it directly on the feeding well of the extrusion line.
Each dosing zone has its pre-storage hopper with interception slide gates electro-pneumatically controlled by the gravimetric logic.
The principal ingredient feeds directly for gravity the extrusion line, while the other ones are fed through screw feeders directly in to the feeding flow of the principal ingredient.
|
|
|
The feeders of the range “BH” are particularly suitable to dose with accuracy powder and granular materials. Their configuration make them in particular fit for materials with a great fluidity, preventing any possible “ siphon” effect; with the simple use of self-cleaning dosing screws,which are present in the standard range of accessories, is also possible the dosing of materials which are particularly sticky and plasticizing ones.
|
|
| ... products without technical information |
| |
BC10 IQv Series Battery Charger
Universal Battery Charger
IQv Series
The innovative IQv Series battery charger digitally communicates with every IQv Series lithium-ion or nickel cadmium battery, regardless of voltage, to identify its chemistry, voltage, and conditon - and then optimize the charging cycle. The unique Renew feature counters memory effect to extend the usable life of the battery.
|
|
The switches of sources of automatic feeding and without cut aim to ensure the automatic passage of a renewable energy source (solar or wind) on source EDF and vice versa without
interruption of food for the user.
These systems are addressed to any site equipped with a means of production of renewable energy (solar panel or wind mill) which is not connected to network EDF.
Consequently, no administrative authorization is obligatory for their installation.
|
|
| ... products without technical information |
| |
... see all the products in the category
Batteries
|
BC10 IQv Series Battery Charger
Universal Battery Charger
IQv Series
The innovative IQv Series battery charger digitally communicates with every IQv Series lithium-ion or nickel cadmium battery, regardless of voltage, to identify its chemistry, voltage, and conditon - and then optimize the charging cycle. The unique Renew feature counters memory effect to extend the usable life of the battery.
|
|
|
|
|
|
KSI provides power supplies specifically designed for driving X-ray tubes in static or rotating applications, configured using proven designs:
- Generators and Power Supplies to 450 kV and 20 kW, rack mount or modular design
- Omniblock™ integrated X-ray tube and power supply in a single enclosure
- Single and double-ended designs to accommodate a wide variety of X-ray tube designs
- Soft switching resonant topologies for high efficiency, compact size, fast dynamic response, and low stored energy
- Analog, RS-232, or custom I/O interface
CW or pulsed output
- Closed-loop emission current control
Single or dual filament; fine and/or coarse control
- Low ripple, tight output regulation, and highly accurate repeatability
- Protected against open and short circuits, tube and cable arc's, overtemperature, overvoltage, and other fault conditions
- Universal input and PFC available
- Mechanical designs for stationary and rotating applications
- UL, TUV, CSA agency approval available; CE mark and/or RoHS compliance available
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
