|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
| ... products without technical information |
| |
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
|
This WOLFANGEL® unit was conceived for the vacuum infusion process, where, at the beginning of the process, a great amount of material is required. The capacity is 50 kg/min. Resin, catalyst and accelerator (or inhibitor) are delivered by 3 material pumps. The particular advantage of this plant is that it can process preaccelerated resin. The reaction process of the resin system can be adjusted to an optimum to the temperatures of the environment so that the possibilities of adjustment are improved compared to a preaccelerated system. This concept can also be used for epoxy dosing units.
|
|
Technical Data:
-Steel frame, zink plated
-Rollers
-Balancer
-Mixing block
-Pneumatic control
-Stainless steel piston pump
-Swivel boom made out of stainless steel
|
|
| ... products without technical information |
| |
|
|
|
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control
|
|
Gas Mixers
WITT gas mixers are available as mechanical or electronic systems for different types of gases, capacity ranges and areas of application. The gas mixtures produced are either variable or pre-set. For local or remote monitoring and control extensive sensor technology and electronics are available. Gas mixers are also supplied with integrated analysers. WITT are happy to design and build equipment to meet special requirements.
|
|
KRAL Volumeter® for research and production test stands. Laboratory measurement precision is achieved despite fast flow changes and fluid oscillations.
The ideal conditions at the Bureaus of Standards however show the potential of KRAL precision. The screw spindle-metering from the KRAL Volumeter is on one hand very robust and handles the oscillation from pressure waves. On the other hand, the spindles are very quick and can follow fast changes of the flow velocity. Optional pressure pulse compensation is available that detects transient fluid waves.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
Model: 24MP
Diameters: 3 to 23 mm
Max lenght: 9999.9 m
Cable guidance: 360º
Reset: Push button
Weight: 536 g
Measuring of cables, pipes, rods ... etc.
Manual handle grip.
Clamp subjection.
Ropes measuring, model: 24MPK
|
|
HOLSTER BAGS
Practical in every detail.
Made-to-measure openings for easy access to controls, keypads or connectors.
Belt holsters can be rotated on the belt and can be removed quickly when required.
Ideal for small data entry devices. Also available in washable material.
|
|
EMGZ 306A Series
The EMGZ 306A Series is a single channel analogue tension measuring amplifier. There can be two force sensors connected. All settings are done with 20-turn trimmers which are easily accessible from the front. The amplifier outputs are
standardized ± 10 V tension output and 0…20 mA or 4…20 mA current output (switchable by jumpers).
For filtering of the output signals capacitors can be added. As options 10 VDC sensor supply voltage and compound-filled versions with additional vibration protection are available. The compound-filled version is used for rotating applications such as stranding machines, etc.
EMGZ 306A.CAL
This version provides a pushbutton to simulate 50% of the nominal sensor
load. This allows to do the calibration of the amplifier by calculation instead
of physical simulation of the tension. www.fms-technology.com
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe.
|
|
FMS Force Measuring Bearings are design to combine the live shaft bearings with the tension sensors to minimise machine space requirements. They can be mounted
in any orientation directly to the machine frame or with supports. The red point on the outside of the sensor indicates the positive measuring direction. The high
accuracy design ensures that even with low material wrap angles and high roller weights, tension can still be measured accurately.
|
|
●Functional description
The FMS DMGZ 300 Series compression / tension load cells utilize four foil-type strain gauges in a full wheatstone bridge configuration mounted on the sensor sleeve. This accurate and robust measuring method is ideal to work in harsh
environments.
● Applications
– Compression or tension force measurement
– Nip pressure measurement
– Punching forces
|
|
|
Strain Measurement Devices provides a seemingly infinite variety of sensors to accurately measure force, pressure, acceleration, and other physical parameters. Approximately 90% of SMD products are custom designed, these sensors meet the more specialized needs of OEM’s.
|
|
|
Our load cell uses proprietary sputtered thin film strain gauge technology to create a rugged sensor with exceptional long term stability. These highly sophisticated sensors are manufactured in high quantities using state-of-the-art equipment.
|
|
|
The S400 range of 'button' style load cells was designed for those force measurement applications where space is at a premium. Constructed from 17-4PH stainless steel, the devices are available in full scale capacities from 50 lb to 1000 lb and are complete with shielded cable to custom lengths.
|
|
|
Strain Measurement Devices provides a seemingly infinite variety of sensors to accurately measure force, pressure, acceleration, and other physical parameters. Approximately 90% of SMD products are custom designed, these sensors meet the more specialized needs of OEM's. SMD's Peerless engineering team designs sensors for unique requirements and aggressive cost targets. Typical specialized requirements include small sizes, high temperature, low capacities, “Cenelec” dielectric, and overload proof sensors. SMD's familiarity, especially with state-of-the-art medical products, has led to the development of complete, value-added, SMD produced subassemblies, which incorporate one or more sensors, signal conditioning, electronics, and other features.
|
|
|
SMD can manufacture a load cell or force sensor to measure anything, even something as complex as the human eye! Our load cells are designed and manufactured using our own proprietary thin film strain gauge process for greater stability and accuracy. Our load cell applications include weighing scales, non-invasive medical sensors, pharmaceutical testing, aerospace and industrial measurements. Whether you need an "off the shelf" load cell or custom engineered load-cells, let SMD design an ultra low profile, button style or overload proof sensor for you. We are the world leader in miniature load cells and low profile load cells.
|
|
The S251 Miniature Platform Load Cell is a low profile, single point OEM load cell offering high accuracy. Only 3/4" high, the S251 is ideal for medical instruments, low profile scales and other low profile, high resolution applications.
A 3,000 ohm thin film strain gauge bridge provides extremely low power consumption for battery and current loop applications. Capacities range from 200g to 10kg-force full scale (0.4 to 22 lb-force).
|
|
|
|
see the results for the following category : 
