|
|
|
|
|
|
The 1000D is the largest of the Isco D-series pump modules, with 1-liter nominal cylinder capacity. It delivers precise, positive, pulseless flow over a range of 0.1 ml/minute to 400 ml/minute, at pressures from atmospheric to 2,000 psi.
Improved displacement resolution on this new model gives finer control over motor movement. Coupled to our patented servo circuit, this means the 1000D can deliver excellent flow accuracy without the need for external flow meters. You get low-flow precision at any pressure, plus the high speed smoothness and power of a DC motor.
The 1000D features 1/4" NPT fittings on inlet and outlet ports for less restriction in filling with viscous materials and for easy connection in pilot plant and other common applications. It also has a special piston wash gland that lets you rinse the cylinder wall behind the primary seal, reducing or eliminating corrosive or abrasive effects of the fluid being dispensed. The result is a longer lasting pump with lower maintenance costs.
|
|
The 260D was the first Isco D-Series pump module, and our first syringe pump designed specifically for refilling under high pressure and pressure programming to handle supercritical fluids. With pressure control to 7,500 psi (517 bar) and a flow rate range from sub-microliter to 100 ml/min, the 260D offers exceptional versatility for almost any type of R&D or method development with supercritical CO2 and other fluids. Dual-pump systems can provide the capability to meter solvent modifiers into the flow stream, or to deliver non-stop continuous flow.
The 260D is also used for a variety of other applications matching its flow and pressure specifications. For applications requiring pressures up to 10,000 psi and/or greater low-flow precision, see the 100D models.
|
|
FMI's V300 is a variable stroke rate metering pump system that drives FMI pumps from 5% to 100% of their rated flow with 0.1% adjustability. Typical speed rates for the direct drive system are 90 to 1800 strokes per minute. The system repeatability is 1%.
Features:
- Membrane Switches for manual Flow Rate Settings and Start / Stop functions
- 3 1/2 Digit LCD Flow Display
- Selectable 4-20 mA, 0-5 VDC, & 0-10 VDC input for communication with process instrumentation
- Start, Stop & Reverse Flow while maintaining flow settings
- Universal Power Input accepts 100-240 VAC 50/60 Hz
- Rugged, anodized aluminum enclosure designed for both bench-top & wall mounting
|
|
|
|
|
|
Stroke Adjuster is made more compact and adjustment is simplified with an internally threaded design. The positive locking device to hold stroke length is readily accessible and easy to operate.
The Pneumatic Piston and Fluid Plunger Assembly is guided at both ends on TFE composite bearings ensuring concentric movement of the plunger though the seals.
The clearance between the return spring and plunger has been optimized to eliminate any possible contact.
A true double sealing arrangement is used so that secondary seal containment is provided.
Lubrication has been simplified with the use of synthetic grease. The lubrication chamber is filled once over the life of the seals.
The bleeder is equipped with a barbed fitting for plastic tubing so that the fluid bled from the fluid chamber can be collected.
Both the discharge and suction check valves have tough TFE composite seats for long life and positive sealing.
Threaded port after the secondary seal provides for the indication, collection or containment of any seal leakage.
|
|
Model 88 Gemini Series
More Than Two Pumps in One
KD Scientific offers the NEW Gemini 88. This unique pump is really two
pumps in one. Each side of the Gemini 88 has its own syringe rack,
motor and leadscrew. The pump can infuse simultaneously at different
rates, or infuse with one syringe and withdraw with the other. When
combined with a valve box it provides continuous delivery.
The KDS GEMINI SERIES Syringe Pump offers continuous infusion or
withdrawal, 24 hours a day, 365 days a year with the accuracy and
low flow of a KD Scientific syringe pump.
The KDS GEMINI SERIES Pump is a breakthrough in pumping technology.
The KDS Model 88 has two independent pumping channels linked
through hardware and software. When combined with a valve box, it
provides the continuous delivery of a peristaltic or piston pump with the
accuracy, absence of pulsation and low flow rates of a syringe pump.
|
|
Compact and Economical
CHEM-FEED Metering Pumps are suitable for a variety of water and wastewater treatment applications. CHEM-FEED pumps feature Blue-White's exclusive Heavy Duty Pump Head with, double ball inlet and outlet cartridge type ceramic check valves, constructed of tough PVDF. Each valve has two ceramic checks, and is double sealed with Viton and TFE/P o-rings. The double ball valve design provides enhanced priming, and is exceptional for purging air and gas. Several models are offered in a wide range of output capabilities, voltage options and material variations. In addition, CHEM-FEED pumps can be customized for volume purchasers with purchase order contracts.
|
|
The DOSTEC dosing pumps are heavy duty, high precision diaphragm pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
The Series DOSITEC dosing pumps are heavy duty, high precission, electric diaphragm pumps for dosing liquid products.
These metering pump are capable of injecting flows from 0 to 2.80 GPH and work at maximum pressures of 145 PSI. It also allows connecting a level switch.
DOSITEC SERIES:
DOSITEC-MP: Adjustable manually, between 0-100%, through a potentiometer.
DOSITEC-MD: Adjustable manually, between 0-100% through a keyboard.
DOSITEC-Q: Adjustable proportionally through a digital signal (pulses).
DOSITEC-mA: Adjustable analogically through a 4/20mA signal.
DOSITEC-PRC: PH-ORP (Redox) control through a on/off relay.
|
|
The Electro Osmotic Pump is of small size but high
pressure performance. It has no mechanical moving parts and so it does not
produce any noise or pulsation in the liquid when operating. It is self
priming and orientation-free. It can be powered by battery or DC power
supply.@It is suitable for applications such as uTAS, Lab-on-a-chip,
dispensing, diagnostics, micro-fuel cells, micro-electronics and
drug-delivery.
It can directly pump de-ionized water methanol and ethanol. Other fluids can
be pumped by indirect pumping. Complete solutions and working systems
incorporating this pump are also provided.
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
|
The EF- 2000 is a high pressure piston dosing pump with one or two injection heads and electronic regulation through an inverter. The avaliable heads goes from 500 L/H (132 GPH) to 2000 L/H (634 GPH).
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
High pressure pump for viscous fluids or other applications.
|
|
|
"BR" type hydraulic diaphragm metering pumps are suitable for use when the liquid to dose contains small suspended solids and when piston lackage are not accepted. Is included on the pump a safety valve for guarantee the diaphragm security against over pressure .The gearbox is a standard wormwheel reduction system coupled with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specification. The mechanism for variation of the stroke length is a positive stroke spring return operated by an eccentric. Stroke adjustment can be done manually, electrically (4-20mA; Profibus) and pneumatically. Different multiple head units are available on request. All the series can be ATEX certified.
|
|
Hydraulic injector pump for the injection of liquid or soluble fertilizer into irrigation network.
It is self contained, with no externals parts other than the connection hoses, and with no water pressure lost in the irrigation pipes
A controller ca be connected that acts upon an electrical valve to start and stop the pump in the desired moment
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
|
|
|
|
Verderflex Scientific Easy Tube Loading IP66 Programmable AU.UPC.EZ.IP66 .
Single or repeat dose
Calibration facility
Brushless motor for 24 hr duty
Variable speed / flow rate
Manual, analogue or digital control
Easy tube change
Intelligent pump fitted with the Verderflex Easy Tube Load Pump Head change the tube size and the pump re-calculates flow rate and dose parameters. Dispenses doses singularly or as batch with speed ramp non drip feature.
Features:
User friendly keypad control
Two line alpha numeric display
Manual, analogue and digital control
Vary flow rate, speed & tube size
Tube size selector
Single or repeat dosing
Non-drip run back feature with speed ramp
Calibrate for viscous liquids
Low maintenance brushless motor
Easy tube load stackable pump head with three roller rotor
Washdown IP66 Enclosure
Technical:
Flow rates 0.8 to 1312 ml/min
Speeds from 10 to 250 rpm
Six tube sizes
Five tube materials
Remote speed control
0-10v dc, 4-20mA or 10K Pot
Remote Stop/Start/Reverse
Volt free contacts or 3-36v dc
RS232 computer signal interface
115/230v 50/60 Hz supply
|
|
Verderlab pump heads distinguish themselves because of the highly perfected detail of construction and geometric design, achieved through an exacting engineering and design review process.
A tube bed is sized specifically for every tube dimension. This ensures that the pump head remains fixed in place inside the pump head without needing any additional clamps.
Precise manufacturing tolerances provide constantly maintained clearances between the ball bearing rotor and the tube bed, preventing back flow. Therefore higher volumetric efficiency can be achieved, which sets the standard for delivery capacity.
|
|
|
"FM" type mechanical diaphragm metering pumps are suitable for use when the liquid to dose contains small suspended solids and when high pressure is not required. The gearbox is a standard wormwheel reduction system coupled with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specification. The mechanism for variation of the stroke length is a positive stroke spring return operated by an eccentric. The pump body is in plastic material.
|
|
The DOSTEC dosing pumps are heavy duty, high precision piston pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
High Fashion Flowing Apparel:
Viscose and Polyester Silk made with Feinpruef Spinning Pumps by Mahr Metering Systemsvon Mahr Metering Systems
Application
Your Filaments are Our Business Your production depends on exact metering of the materials you process, and your Spinning
Pumps must be precisely tuned
to the specific requirements
of your manufacturing process. Mahr Metering Systems has a wide product range that covers virtually all applications including yours.
- Filaments for highly elastic stretch fabrics
- hollow fiber for medical and filter purposes
- fibers for high strength applications such as safety belts
- fine denier fiber for the finest of haute couture
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Introducing the Verderflex Aura, a low flow, high pressure dosing tube pump. Specifically designed to offer high performance in the smallest of packages, this pump is ideal for use in swimming pools, spas, saunas and leisure centres.
The Aura is extremely user friendly and requires no special training.
Features include an easy to access pump head with simple tuble load faccility for addional safety. THere are no moving parts to touch - the tube is loaded by the touch of a button.
Pump Features Include
Flows up to 79 ml/min (0.02 US GPM)
Pressure 0-4 bar (58 PSI)
IP66 / NEMA 4 enclosure
Start/Stop button
Fixed speed timer control
Timed dose - dose for up to 20 minutes with the touch of a button
Timed lock out - disable repeat dosing within a specific time, up to 20 minutes
Tamper evident plugs prevent unauthorised adjustment
Manual priming function
Easy tube load facility
2 rollor rotor
Easy to see LED and electroluminescent lighting
|
|
|
|
|
|
KD Scientific is proud to offer our new Pico Pump. It has infusion and
withdrawal capabilities with accurate deliveries of picoliter, nanoliter,
microliter and milliliter flow. It is especially designed to hold microliter
syringes ranging from 0.5ul to 10ml. Applications include cellular injection,
micro flow for drug infusion, capillary liquid chromatography and
micro reaction deliveries.
The KDS Pico pump combines smoother flow and updated features to
create a high performance pump at affordable prices. The Pico has a
bright display and easy to use interface. A new two line 16 character
fluorescent display and 6 membrane keys for ease of use and require
only two entries to start pumping. Select syringe diameter and flow rate.
The flow rate can be changed while the pump is running.
The KDS Pico pump will operate continuously in rate mode or accurately
dispense a specific amount of fluid in volume mode. The microstepping
pump delivers very smooth and constant flow over the entire
flow range. The Pico pump feature non-volatile memory. The pump
remembers its last syringe size, flow rate and configuration settings. It
meets all the relevant European EMC and Safety requirements for laboratory
use.
KD Scientific also offers a family of syringe pumps to meet all applications.
The full line of KDS pumps include a simple syringe dispense only
pump, a multi-syringe infuse and withdrawal pump, push and pull
pumps, continuous pumps for uninterrupted fluid delivery, nanoliter
pumps, emulsifier, high pressure and custom OEM pumps.
|
|
The MultiFertic dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
Moyno 1000 Pumps
Economical, high-efficiency Moyno 1000 pumps offer an unparalleled combination of features other positive displacement pumps cannot match.
|
|
Moyno Metering Pumps
Precise Moyno Metering Pumps deliver economical, efficient performance for metering liquids under low flow conditions in process applications for industries including chemical processing, pulp and paper, general industrial, wastewater treatment and many others!
|
|
|
New KDS 270 Legato Push Pull syringe pump has an advanced mechanical design for superier flow performance. broad dynamic flow range from pl/min to ml/hr. Accuracy to 0.35%, adjustable linear force to 75 lbs (35kg). High resolution color touch screen enables the user to quickly create configurations and recall them for easy use. Also available in Programmable version.
|
|
GA series is a small range but versatily of solenoid dosing pump. The design ensures a high degree of accuracy and reproducibility commensurate with the requirements of the water treatment.
All the series is supply with a complete set of accessory including Filter, injection valve, suction & discharge pipe.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
|
|
