|
|
The EH-HV Series is specifically designed to accurately feed high viscosity chemicals.
* Tested with a 20,000 cps polymer verified with a Brookfield viscometer, Model LVF, at 25° C, #4 spindle at 12 rpm.
Equipped with rugged, machined PVC liquid ends and spring loaded stainless steel valve balls, the HV series is designed for superior valve action and performance. Rated to 20,000 cps*, the HV Series is available in four feed ranges from 1 to 4 GPH (at 50 PSI). Sophisticated design and backed with the industry's only full 2-Year warranty, the EH-HV Series is the perfect solution for high viscosity feed applications.
|
|
|
The EF- 2000 is a high pressure piston dosing pump with one or two injection heads and electronic regulation through an inverter. The avaliable heads goes from 500 L/H (132 GPH) to 2000 L/H (634 GPH).
|
|
|
|
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Hydraulic injector pump for the injection of liquid or soluble fertilizer into irrigation network.
It is self contained, with no externals parts other than the connection hoses, and with no water pressure lost in the irrigation pipes
A controller ca be connected that acts upon an electrical valve to start and stop the pump in the desired moment
|
|
* Aluminum pump housing: 12.9" x 8.3" x 10"
* Variance in each cycle of less than 1%
* Flow rate range from 1.56 ml to 457 ml per minute
* Applications: laboratories or filling operations of intermediate volume requiring precision.
|
|
MacRoy D
Multi-function discharge valve for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
|
The gamma/ L is the world's first calibrateable pump of its performance class. The metered quantity is directly displayed in l/h. The large illuminated LC display makes sure that all displayed variables are simple to read. The integrated 2-week Process-Timer (optional) offers an extremely wide range of application possibilities.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Triple Diaphragm Design
Double Ball Check Valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675
|
|
DOSING PUMPS AND VALVES
Serie PDP
Pneumatic dosing pumps in stainless steel AISI 316L (1.4404).
Serie VD
Double stage dosing valves in stainless steel AISI 316L (1.4404) standard and pneumatic version.
|
|
The DOSTEC dosing pumps are heavy duty, high precision piston pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
GENERAL SPECIFICATIONS
Designed for continuous operation in industrial applications
Hydraulic "by-pass" mechanism actuates PTFE diaphragm
Very compact package with small footprint
Capacity adjustment from 0 to 100% of rated flow with ±1% steady state accuracy over a 10:1 turndown ration
High performance single and double check valves
Integral over-pressure safety valve
AVAILABILITY Simplex and Duplex available (on most models)
Liquid end materials available: cast iron, 316 stainless steel, alloy 20, alloy C22, PVC, & PVDF (on most models)
Multiple stroking speeds available to cover intermediate flow ranges
Motor mountings available: various integrated motors; API & close coupled NEMA 56C, 48 can frame; API & close coupled IEC 71 B5; and, API 143/145 TC (on most models)
Manual, pneumatic, or electronic capacity control available (on most models)
Double diaphragm rupture detection available (on most models)
ANSI flanges available for suction & discharge connections
|
|
- ORP controller and dosing pumps in one compact unit.
- ±5 mV accuracy with unbeatable performance.
- Isolated 4 to 20 mA recorder output.
- Proportional dosing slows the pump down when the measured ORP level approaches the set value which avoids over dosage of oxidizing or reducing agents.
- Alarm contact is activated whenever the ORP reading varies more than 200 mV from the set point.
- Auxiliary contacts allow the user to attach a mixer or priming pump that is activated only when the pump is dosing.
- High Quality materials are used for all parts that come into contact with liquid.
|
|
- Solenoid-driven Diaphragm Metering Pumps
MAGDOS LT
MAGDOS LC
MAGDOS DE/DX 01...12
MAGDOS DE/DX 20...100
- Motor-driven Diaphragm Metering Pumps
MINIDOS A
MIDIDOS E
MEMDOS E / DX 4...150
MEMDOS E / DX 160...380
MEMDOS GMR
MEMDOS MR
- Motor-driven Piston Metering Pumps
FEDOS E/DX
REKOS KR
KARDOS KN
KARDOS N
|
|
High Fashion Flowing Apparel:
Viscose and Polyester Silk made with Feinpruef Spinning Pumps by Mahr Metering Systemsvon Mahr Metering Systems
Application
Your Filaments are Our Business Your production depends on exact metering of the materials you process, and your Spinning
Pumps must be precisely tuned
to the specific requirements
of your manufacturing process. Mahr Metering Systems has a wide product range that covers virtually all applications – including yours.
- Filaments for highly elastic stretch fabrics
- hollow fiber for medical and filter purposes
- fibers for high strength applications such as safety belts
- fine denier fiber for the finest of haute couture
|
|
LMI Pump : ELECTROMAGNETIC dosing pumps, the LMI range is electronically operated. Flow rates up to 76 l/h and pressures up to 135 bar.
G™ Pump : Motor-driven dosing pumps with mechanically actuated diaphragms. Flow rates up to 1200 l/h and pressures up to 12 bar.
mROY® Pump : HYDRAULICALLY actuated diaphragm dosing pumps. Flow rates up to 310 l/h and pressures up to 123 bar.
MAXROY® Pump : ELECTRIC MOTOR-driven hydraulically actuated diaphragm dosing pumps. Flow rates up to 1100 l/h and pressures up to 28 bar.
MILROYAL® / PRIMEROYAL® Pumps : These HIGH FLOW and HIGH PRESSURE dosing pumps present a huge capacity of adaptation to meet the specific requirements of your industrial processes. Flow rates up to 50,000 l/h and pressure up to 500 bar.
Automatisms - Regulation : A range of systems for flow rate automation.
Accessories : A wide range of accessories to round off any dosing pump facility
|
|
|
|
|
|
Motor Driven Pumps Spring Series
Plunger Piston Metering Pumps PS1 Series
PS1 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 1,5 to 304 L/h
Max pressure: 20 BAR
Stroke rate: 58 • 78 • 116 strokes/minute
Motor: standard 0,18 and 0,25 Kw (IP 55)
Stroke length: 15 mm
Plunger Piston Metering Pumps PS2 Series
PS2 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 40 to 1000 L/h
Max pressure: 20 BAR
Motor: standard 0,25 • 0,37 • 0,55 • 0,75 Kw (IP 55)
Stroke length: 25 mm
Mechanical Diaphragm Metering Pumps MS1 Series
MS1 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 5,5 to 460 L/h
Max pressure: 10 BAR
Motor: standard 0,18 • 0,25 • 0,37 Kw (IP 55)
Stroke length: 2 mm • 4 mm • 6 mm
Mechanical Diaphragm Metering Pumps
MS0 Series
MS0 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in a plastic housing.
Capacity: from 17 to 47 l/h
Max pressure: 5 bar
Diaphragm diameter: 50 mm
Motor: standard 0,08 kw (IP55)
Stroke length: 2 mm
|
|
Features
- Individual control board for each pump Programmable duration of each injection
- Self-Priming Pump Continuous Run Setting
- On-Board Prime Button Stackable Pump Head
- Variable Speed Adjustment
- Watertight and Durable Enclosure
- Selectable Cycles per Day
- Pump Inication Light
- External On/Off Switch
- 2.8 gal/hour Maximum Rate
The SF-4000 and SF-6000 dispensers are ideal for applicactions requiring daily chemical maintenance. The SF-4000 is a single drive system and the SF-6000 is a dual drive system that can be used for two separate chemicals or for two separate locations. These can be used as stand alone units for periodic injection of maintenance chemicals or can be used in conjuction with an automatic controller.
|
|
* Hydraulic diaphragm pumps AX series
The highest riliability system metering pump
Max. discharge capacity: 51.6/49.7 L/min
Max. discharge pressure: 5.0 MPa
Main materials: PVC, SUS316
more
* Mechanically-driven diaphragm pumps LK series
Applicable to the many diverse needs of chemical feeding
Max. discharge capacity: 45/54 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
more
* Mechanically-driven diaphragm pumps SK series
Answer to wide-range application from inclusion into a system to plant facilities
Max. discharge capacity: 1.1/1.32 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
|
|
Serie LK
Compact and light weight metering pump
The specific feature of the LK series ist the dual-cam driving section with a highly reliable worm gear type speed reducer. Achieving maximum wear resistance in continous operation was a goal of the construction. The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible.
Various Typs and material
Fitting for nearly any application a various number of pump sizes are available. Moreover six different material combinations can be choosed for the pump heads. So most applications can be covered. To select to best fitting connection, flange, hose and pipe connections are available as standard.
|
|
The EW Series is the flagship of the E-Class with capacities up to 6.7 GPH (25.4 l/h) and a maximum pressure of 150 PSI (10 bar). Compact, powerful and packed with a variety of innovative design features the EW can enhance any feed application.
IP65 Construction
The rugged Polyphenylene Oxide (PPO) enclosure is equipped with a durable clear cover to protect the membrane switches and stroke control of the pump, which are mounted opposite the liquid end. The display utilizes a high temperature LCD that provides extra protection from sunlight in outdoor applications.
|
|
General description:
ELADOS EMP metering pumps are reciprocating positive-displacement pumps with a special electrical motor drive which has been tried and tested in the field. The use of various types of controller means that the pumps can be adapted to any operating procedures for quantitative and proportional metering.
Features :Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
|
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely.
|
|
|
Metering pumps with mechanically linked diaphragms are almost universally applicable in the low pressure range. They offer a favourable cost/performance ratio at minimum service effort.
|
|
* Aluminum pump housing; 4 5/8" x 5 3/8" x 4 3/16"
* Internal stainless steel components
* Available in fixed speed, mechanical speed control, air drive,Variflow DC, and explosion proof assemblies.
* Positive displacement pump with flow rates of .95 GPM(3.6 LPM)
* Applications: Industrial, Pulp & Paper, Ink, Food, Metering, Solvents, Slurry, Pulp and Paper, and Laboratory
|
|
Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
Features
• Air-free dispensing
• Snuff-back prevents post-dispense dripping
• Simple load mechanism also provides easy cleaning
• Manual or Timed modes
• Large digital LED display
• Clean room compatible
|
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements.
|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
|
|
|
|
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
Beinlich is now supplying a customer with high-precision metering pumps for applying beads of silicon sealant and for bonding housing components together. In two-component systems, the pumps are used for media with viscosities from 5 mPas up to a highly viscous 1,000,000 mPas and reach precisions of over 90 percent at high pressure after just two revolutions. This precision, which even Swiss watchmakers can only dream of, is achieved using the latest Beinlich gear technology.
In the two-component systems, two of these metering pumps ensure the ideal mixture ratio using different volumetric displacements and different speeds for bonding plastic parts, filling with resins, or applying sealing compound.
|
|
|
|
