|
|
Model Number MCP-50
Dimensions（mm）φ26xH63.5
Maximum Pumping Volume 50μl/cycle
Adjustable Pumping Volume Range 5～50μl
Maximum Operating Frequency 4Hz
Repeated Pumped Volume Accuracy ±1%(15～50μl),±2%(5～15μl)
Port Connection M6 , 1/4-28UNF
Ambient Temp. Range 10 - 40
Fluid Temp. Range 10 - 40
Voltage 12VDC , 24VDC
Power Consumption 4.4W
Duty Cycle Continuous
Insulation Class B
Dielectric Strength AC1500V 60s
Wetted Materials PTFE (POM or PP) , FPM
|
|
Process metering pumps
Process metering pumps are used in all applications where corrosive, toxic and flammable liquids are metered under very high pressures and extreme temperatures. They are e.g. used in the chemical industry, petrochemical industry, refineries as well as oil and gas production or as special metering pumps in the process industry.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
Kloehn Ltd. syringe pumps are known throughout the industry for their performance and quality. No other family of pumps offers the designer/user as many capabilities and so much flexibility at a great value. Kloehn Ltd. pumps offer the highest resolution and syringe driving forces, giving users the ability to work with the largest syringe range possible. Add the versatility to choose many different valve options, including the newest ceramic face valve, and you have a pump/valve module that is ready to work for virtually every application requiring precision fluid metering.
Features include:
- Standard 24,000:1 or 48,000:1 resolution
- Syringe sizes from 25ul through 50ml
- Valves; 3,4,5,6 & 8-way configuration in both Distribution and Non-Distribution form
- Stepper motor driven precision ball screw coupled with ball nut.
|
|
The neMESYS high pressure syringe pumps are made for the precise injection of fluids into high pressure systems or for working with viscous fluids. They bring the approved high precision neMESYS dosing technology into pressure ranges up to 250 bar.
The powerful, highly precise and PID controlled drive unit of this high pressure pump ensures an extremely smooth movement of the syringe piston. This enables the pulsation free generation of precise fluid streams in the range of nanolitres (depends on syringe size) and the dosage of micro volumes. By using rugged stainless steel syringes the force of the drive unit can be converted into pressures up to 250 bar.
The integrated pressure sensor (measurement range 0 - 250 bar) enables continuous monitoring of the actual pressure and may help to increase the safety of your high-pressure applications.
|
|
The neMESYS syringe pumps are ideal for generation of extremely smooth and pulsation free fluid streams in the range of millilitres or even nanolitres per second. They are also perfectly suitable for high precise dosage of micro volumes in the range of nanolitres.
The PID controlled drive unit of these syringe pumps ensures an extremely smooth movement of the syringe piston and prevents stick-slip-effects of the piston inside of the syringe tube. This guarantees a very high precision and the absence of pulsation in the generated fluid streams.
The universal syringe holder offers an outstanding flexibility in choice of the proper syringe for your application. Now the selection of the right syringe only depends on your application and not on any syringe manufacturer. Single syringe pumps can be equipped with 3-way-valves optionally. This allows take-up of reagent and delivery without drawing the syringe from the holder or changing the tubes.
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
Highest precision up to 195 bar
The neMESYS mid pressure syringe pumps are made for the precise injection of fluids into systems with higher pressures or for working with viscous fluids. They bring the approved high precision neMESYS dosing technology into pressure
ranges of up to 195 bar.
Technology
By simple assembling of single neMESYS mid pressure syringe pumps (click system) or by linking them via bus cable you can build up a high-performance multi-channel dosing system. The powerful, highly precise and PID controlled drive unit of this mid pressure pump ensures an extremely smooth movement of the syringe piston. This enables the pulsation free generation of precise fluid streams in the range of nanolitres and the dosage of micro volumes.
|
|
# Holds small or big syringes up to 60 mL
# Pump continuously until you stop the pump
# Infusion rate can be changed while pumping
# Remembers previous settings on power up
# Power failure mode allows pump to continue pumping after a reset
# Syringe purge mode
# Displays total volume dispensed in mL or µL units
# Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
# Precise reproducible flow rates
# Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min
# Pictured Syringe is for Demonstration purposes only
|
|
Description:
* Holds 2 syringes up to 60 cc
* Continuous infusion mode allows one pump to infuse as other withdraws
* Dual pump mode allows for simultaneous operation with one pump mirroring the second pump
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
|
|
|
|
DosiPump DP1000
The Dosi-pump system was designed to be flexible and reliable versus current pumps in the market. The unit is user friendly and engineered for batch or continuous operation with minimal down time.
Dosing pumps are convenient expulsion pumps that are used to introduce fluids into any vessel. Dosing pumps are frequently use for dosing rough materials, acids, adhesives, chemicals, hazardous materials, liquid , agar or lubricants. Dosing pumps are also used to move gasoline, diesel fuel, and oil sludge, slurry gas and rendering wastes.
Dosing pumps are obtainable with lots of features and can transport media / agar either upright or parallel. Adjustable speed pumps can operate at speeds selected by an operator nonstop & maintain performance specifications at 100% cycle.
Features and Benefits
> Easy operation software operates with a touch screen.
> Anti-Drop, drip suppression by retraction of pump movement
> Dual head pump for smoother liquid / agar filling
> Pump offers high flow rates of up to 1,000 ml/min.
> Easy Volume and speed calibration
> Backlight graphics display for easy reading
|
|
Suitable for Gas-forming liquid such as Sodium Hypochlorite and Hydrogen Peroxide.
To prevent unstable operation owing to these gases, the suction port is located in the upper position and the vent connection is furnished at the top of the pump chamber.
|
|
|
Reciprocating controlled volume pumps are widely used in the petrochemical and water treatment industries where a high degree of accuracy and reliability under a range of conditions are required. Various types are available to meet the diverse demands of many processes.
|
|
|
|
|
|
* Doubled walled stator design eliminates need for a universal joints or coupling rod.
* Available in Cost effective, portable-closed coupled (Motorised) design or Bare shaft design for flexibility of use of drives e.g. Mechanical speed variators, Diesel engine etc.
* Can be adopted for solar power motors.
* Suitable for metering, dosing with 90 to 95 % accuracy.
* Ideal Pump for the Australian and New Zealand Market.
Fluids Handled / Applications
Domestic – Cellar drainage, septic tank cess pit emptying, garden sprinkler systems, garden reticulation, water supply sampling from spears, wells, streams, dams, creeks, shallow bores and rivers and especially if the water is silted or sandy.
Industrial – General purpose pump for Wine, Beverage, Weak Acids & Alkalis transfer, sump duties, septic and sullage disposal, brine injection, spear point, Diesel, Lubricating Oil, Water Based Inks, Vegetable Oils, Plating Solutions, Fluids with suspended solids e.g. Dirty water from cesspools, Domestic water transfer.
Agriculture – Irrigation, Cattle Manure and like.
|
|
Description:
* Holds 2, 4, or 6 syringes of up to 140 cc each
* Infusion rates from 0.568µL/hr ( 1 cc syringe) to 1337 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Higher flow rate models available
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
* Computer controllable: networkable up to 100 pumps
* Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
* Add the OEM Starter Kit to run as a fully functional, stand-alone pump
Description:
* Does not have a built-in user interface
* Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm)
* Operates from a 12V DC power source
* Holds 1 syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
|
|
Pulseless series is designed to be almost nothing of any pulsation with high accuracy by special cam and check valves.
Compact design achieved by the cylindrical cam which drives two plungers.
|
|
|
|
|
|
Salient Features
* Positive displacement, inherently self-priming and capable of handling entrapped gases.
* Inherently non clogging and capable of handling high percentage of solids.
* Continuous pulsation free flow with minimum turbulence and low internal velocity within the pump.
* Doubled sealed articulation joints for longer service life of critical components.
* Temperature range upto 120OC.
* Simple maintenance, sturdy construction, no valves needed which would impede the flow.
* Low NPSH, higher suction with up to 8.4 meter of water column and capable of developing high pressure up to 24 bar even at low pump speed .
* Efficiently handles Non-Newtonian media, slurries and fibrous contents up to 1 million centipoise.
* Capability of variation in flow rate by just changing the pump speed.
* Capability to work on uneven/inclined surfaces.
* Elimination of gearbox.
* Simple construction and high reliability of operation.
* Energy conservation and minimum installation space requirement.
|
|
Description:
* Holds 2 Syringes up to 60 cc* each, can be different sizes
* Infusion rates from 1.459 µL/hr ( 1 cc syringe) to 7635 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Gradient Pumping Features:
* Smooth linear increasing or decreasing gradient
* Set the starting rate, ending rate, and the time
* Pre-program multiple gradients plus any other NE-1000 programming feature
Description:
* Holds 1 Syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Description:
* Holds 1 Syringe up to 60 cc*
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Our new SELF SERVICE diesel fuel dispensers have been designed on the basis of in-depth studies of users' requirements.
Here is what users are looking for:
- Sturdy make and attractive design. The dispenser should be solid, but that doesn't mean it has to be unsightly.
- Fast refuelling.
- Accuracy and reliability. The on-board flow-meter must be precise and consistent over time.
- Must allow data management and select authorized users.
- Must be connectible to a PC for exporting data files and capable of running programmes that keep track of all refuellings performed.
- On-board printer for issuing receipts.
- Level-gauge showing current tank levels.
- Filter for separating any water contained in the diesel fuel.
- Competitive prices.
In reply to these needs we have produced a complete range of newly-designed fuel dispensers. Modern and attractive, they are compact and sturdy, and thanks to a lockable front door on hinges, the internal organs can be easily accessed for maintenance.
|
|
The QDX High Flow Hazardous Duty pump is designed for use in commercial, industrial, and laboratory hazardous applications. Accommodates flows up to 2200 ml/min. The QDX utilizes the FMI Adapter Kit P56C and a Class I, Group D, Class II, Groups E, F, and G, NEMA frame 56 face-mount motor.
The QSYX Low Flow Hazardous pump is coupled to Class I, Group D, synchronous motor for the ultimate stroke to stroke accuracy. Accommodates flows up to 92 ml/mim.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
The DA35 Autocan pump extrudes high viscosity material under pressure directly from a pre-filled can. Suitable for automatic and semi-automatic controlled dispensing applications which require a constant supply of air-free material.
DA35 features
• Material delivered air-free
• Low noise air pump
• Electrical sensing
• Simple load mechanism also provides easy cleaning
• Teflon, Viton and PEEK seals for wetted parts
• No need to transfer material which avoids waste
• Easy hook up to automatic systems
|
|
| ... products without technical information |
| |
|
|
