|
|
Specifically designed to overcome the challenges of reliable and accurate pumping at high-volume capacities. Every revolution of the 420 pumps more than 1½ gallons; the 520, more than 2 gallons. Ideally suited for tomato, vegetable and pet food industries and for chemical/industrial applications.
- Rotor/shaft connection sealed from the product zone
- 316L stainless steel pump body
- Exclusive, non-galling Waukesha "88" alloy rotors;
316L stainless steel rotors optional
- Bi-directional flow
- Mechanical seals standard; O-ring seals or variety of
standard commercial seals optional
- Seal replacement from the front without removing
pump body
- Maximum pressure: 150-200 psi (10.3-13.8 bar)
- Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)
|
|
Waukesha Cherry-Burrell's traditional "Can-Do Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.
- Easy cleaning and disassembly
- Flexible, three-way mounting
- Field interchangeable single and double "O" ring and mechanical seals
- Exclusive, non-galling Waukesha "88" alloy rotors
- 3-A and BISCC approved
- Maximum pressure: 200 psi (13.8 bar)
- Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
Description:
* Holds 2 syringes up to 60 cc
* Continuous infusion mode allows one pump to infuse as other withdraws
* Dual pump mode allows for simultaneous operation with one pump mirroring the second pump
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
# Holds small or big syringes up to 60 mL
# Pump continuously until you stop the pump
# Infusion rate can be changed while pumping
# Remembers previous settings on power up
# Power failure mode allows pump to continue pumping after a reset
# Syringe purge mode
# Displays total volume dispensed in mL or µL units
# Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
# Precise reproducible flow rates
# Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min
# Pictured Syringe is for Demonstration purposes only
|
|
Description:
* Holds 2, 4, or 6 syringes of up to 140 cc each
* Infusion rates from 0.568µL/hr ( 1 cc syringe) to 1337 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Higher flow rate models available
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
* Computer controllable: networkable up to 100 pumps
* Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
* Add the OEM Starter Kit to run as a fully functional, stand-alone pump
Description:
* Does not have a built-in user interface
* Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm)
* Operates from a 12V DC power source
* Holds 1 syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
|
|
Description:
* Holds 2 Syringes up to 60 cc* each, can be different sizes
* Infusion rates from 1.459 µL/hr ( 1 cc syringe) to 7635 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Description:
* Holds 1 Syringe up to 60 cc*
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Gradient Pumping Features:
* Smooth linear increasing or decreasing gradient
* Set the starting rate, ending rate, and the time
* Pre-program multiple gradients plus any other NE-1000 programming feature
Description:
* Holds 1 Syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
| ... products without technical information |
| |
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
NOVAPLEX pumps are powerful diaphragm process pumps for a variety of applications. They are best suited for critical high pressure installations. Additionally, they can be used when the capability of classical metering pumps is exceeded.
Features of the pump
- Double diaphragm pumpheads with positive diaphragm position control
- Double diaphragm pumpheads with built-in pressure relief valve
- Crank gears with integrated lubrication system
- Crank gear bearings executed as anti-friction bearings
- Modular concept
|
|
|
|
|
|
Hygienic Diaphragms for Hygienic Diaphragm Valves
To achieve optimum diaphragm performance, only the highest-grade specially engineered materials are used in our diaphragm production. Steam cycle testing is performed on all grades of Top Line diaphragms to ensure the best possible life span of the diaphragms. Compliant and registered ISO 9001-2000 Quality Management System (QMS).
Reliability, availability and low pricing are key features that make our replacement diaphragms attractive to reducing the total cost of ownership and minimizing costly downtime. Top Line diaphragms are interchangeable with key industry manufacturers when a threaded or bayonet type connection is required.
EPDM elastomer diaphragm features:
•Proprietary low extractable steam grade material
•Superior cycle life
•FDA compliant & USP Class VI certified by NAMSA
Viton elastomer diaphragm features:
•High chemical resistance with the life cycle benefits of an elastomer
•FDA compliant material
TFM faced high pressure molded diaphragm features:
•Steam grade material
•Superior cycle life
•Better density
•Virtually non-permeable
•FDA compliant & USP Cladd VI certified by NAMSA
Certifications & Approvals
Top Line Grade 1KS & 2KS diaphragms are manufactured utilizing a proprietary unique high pressure molding technique that ensures better density and is virtually non-permeable. More importantly, this process significantly increases the cycle life of the diaphragm under harsh conditions.
|
|
| ... products without technical information |
| |
The G2000 is a fixed flow, heavy duty, transfer pump. It is available in a variety of materials to suit various fluid types.
Capacity up to 500 M3/hr 2200 USGPM
Pressure up to 40 Bar 580 Psi
Viscosity up to 1,000,000 cSt 4,630,000 ssu
Temperature -40 to +300 C 570° F
|
|
Magmo pumps are designed principally to handle high viscosity abrasive sugar products, such as Molasses, Massecuite and Magma. The ellipse and scraper principle it uses was originally devised by the sugar industry itself to overcome the problems associated with pumping these difficult liquids.
The current design includes the best features from previous pumps and successfully deals with the problems common to pumping liquids such as massecuite.
|
|
The P2000 rotary pump is specifically designed for space constrained installations, or where a simpler belt-driven design is preferred. The P2000 rotary pump is available in two different designs :
Inboard roller bearing configuration with single mechanical sealing for duties involving lubricating liquids, such as Fuel Oils, Vegetable Oils, Lube Oils, and Additives.
Inboard plain bearing configuration with gland packing for duties involving non-lubricating liquids, such as Molasses, Resins, and Polymers.
|
|
|
The U2000 rotary pump is specifically designed for systems or processes where infinitely variable flow from 0-100% of the rated pumps capacity is required. The U2000 achieves this with a variety of Control Types,without the need for speed variation devices, bypass lines/loops or control valves. Our patented Constant Pressure Control (CPC) pump will operate against a closed valve.
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
 see the results for the following category : Screw pumps |
|
|
