|
|
* DC/DC Displacement Transducers :
inductive, for the measuring of displacements or magnitudes that can be converted into displacement, integral measuring amplifier, robust, vibration and shockproof, special versions by request.
* LVDT Transducer with IN-LINE Amplifier :
small sensor with a diameter of only 8 mm for installation into restricted structures, vibration-proof and wear resistant, internal IN-LINE amplifier, for direct measuring of displacement and indirect measuring of convertable mechanical values.
* DC/DC Displacement Transducer :
Detailed English product information will be available shortly.
* DC/DC Displacement Transducer :
Detailed English product information will be available shortly.
|
|
ATLAS, POLARIS and ANTARIS laser displacement sensors work by the triangulation principle of measurement.
Single sensors measure displacement, depending on combination and placement you may measure thickness, width, height, length, straightness, flatness, profile or diameter.
Based on a Digital Signal Processor (DSP) the intelligent sensor controls the exposure of the CMOS and the output power of the laser source.
Due to this, LAP laser sensors measure extremely precise and fast, even if surface characteristics like color or reflectivity are changing.
Parameter like measurement speed or filters are handled directly in the sensor's DSP.
Digital workflow from CMOS to evaluation software eliminates the error sources of analog measurement. Still, ATLAS, POLARIS and ANTARIS sensors offer an analog output 4-20 mA.
ATLAS sensors can be connected by RS485, e.g. to further LAP sensors, to I/O modules, encoders ... .
Optional you may use interfaces to Ethernet UDP, Profibus DP or RS232.
|
|
|
The non-contact displacement sensors in the optoNCDT series operate according to the triangulation principle. Different models are suitable depending on the requirement. From the low-cost model to the ultrafast precision sensor. Measuring ranges from 2 mm to 750 mm are available. The product group is distinguished by resolutions from 0.03 µm to 300 µm and linearity between 1 µm and 1200 µm. Sensors for special surfaces such as shiny metals round off the range. The many times proven function for real-time surface compensation of changing reflection characteristics, RTSC, provides maximum signal quality in the market.
|
|
Laser triangulation position sensors
RF60X Series
The sensors are intended for measuring and checking of position, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for measuring levels of liquid and bulk materials.
The series includes three lines of models: RF603 - quick-response sensors with 2 to 1000 mm operating range, RF600 – wide-range sensors and RF605 – inexpensive compact sensors.
|
|
High resolution, noncontact, capacitive sensors.
Available in compact, embedded systems or modular cabinets.
Ranges: 10µm to 10mm
Resolution: as low as 0.4nm
|
|
Cable displacement sensors are based on an extremely simple operating principle, transforming the linear displacement of the cable into a rotary displacement by means of a drum connected to a return spring.
The sensor outputs a signal proportional to the cable displacement through a hybrid potentiometer or an encoder fixed to the drum shaft.
The signal is then an analogue signal (voltage or current) or a pulse signal.
|
|
Designed to complement today's advanced data acquisition/control systems, Solartron's S-Series brings new levels of accuracy, reliability and flexibility to the sharp end of displacement measurement technology...
- Digital, AC, DC and 4-20mA options
- <0,2 % linearity FSO analogue option
- 19 mm diameter stainless steel body
- Rigid stainless steel carriers
- Improved stroke to body length ratio
- IP 67protection
- Wide range of accessories
|
|
AC operated Linear Variable Differential Transformers (LVDT’s) contain no electronics and are therefore the first choice when small size, hostile environments or low cost are required. AC LVDT’s when used in conjunction with Measurement Specialties Signal conditioners (see Instrumentation) offer the maximum amount of flexibility for outputs and scaling. Ranges from +/-0.005” to +/-10.000” are available.
The E Series of LVDTs is economical and satisfies numerous applications where LVDT performance and reliability are desired, but where budgets are limited. Linearity is 0.5% of full-range for all units except the E2000. The E series is particularly suitable for moderate operating temperatures. Its rugged construction will resist the shocks and vibrations encountered in most industrial applications. The E series is housed in magnetic stainless steel for protection against electromagnetic and electrostatic interference.
|
|
|
Eddy current transducers detecting contactless all metals with high accuracy and are not influenced by non-metallic media between target and probe tip. Oscillating applications can be realised with high measurement frequencies up to 10 kHz.
|
|
Non-contact displacement sensors using eddy current technology measure distances, displacements, or positions of any electrically-conductive target. These objects may have both ferromagnetic and non-ferromagnetic properties. Due to the high insensitivity to oil, dirt, dust, moisture, interference fields, etc. the eddy current principle is ideally suited to applications in harsh industrial environments.
Eddy current sensors designed for industrial use in factory automation, for machine monitoring, for inspection and for measuring and testing.
|
|
|
Microprocessor chips have found their way into a surprisingly high number of products that are around us every day in our home, car and office. This explosion in worldwide demand has forced semiconductor manufacturers to enhance quality and throughput in ways never before imagined. Capacitec's microinch level positioning sensing systems assist chip processing and handling equipment manufacturers to sense silicon wafers for exact positioning prior to deposition, etching and other processing where generating unwanted particles is preferred. This is accomplished without coming into contact or damaging their highly sensitive surfaces. Other industries where sensitive surfaces must be measured damage free are printing presses, photocopier rollers, computer hard disc drives and molten materials.
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Differential Variable Reluctance Transducer
- Available with sub-micron resolution
- Operating temperature to 175°C
- Frequency response up to 20 kHz
- Stainless steel and high-performance polymer design suitable for extremely harsh environments
- Waterproof, suitable for submersion in corrosive media such as brake fluid and hot saline
- Non-contact design suitable for high duty-cycle applications
- Easily customized to suit specific application
|
|
|
The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications.
|
|
|
|
|
|
|
The program of ODS Black-line laser sensors are a series of sensors based on optical triangulation, with different measuring ranges and resolutions, used in various environments, from the very hot and harsh applications in the heavy industry to the delicate applications in laboratories. Potential applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to milling marble, stone and cast iron – everywhere a non-contact precision measurement is valued. Seven different measuring ranges are available, the smallest covers 16 to 25 mm and the largest 400 to 1100 mm. Furthermore all ODS Black-line sensors are available with measuring frequencies of 2 kHz and 5 kHz. Higher measuring frequencies give shorter distance between the individual measuring points on a moving target, and increase the possibility for averaging over a sufficient number of measuring points to obtain a required high resolution. Apart from the standard models, all ODS Black-line sensors are supplied with a Select functionality, allowing the sensor to be programmed to calculate a user defined running average. Software with every sensor provides easy setting of the Select parameters. For more detailed information please study the PDF/datasheet on our website www.sensor.dk
|
|
Type: ISAG
Stroke: 2 .. 50 mm
Transducer: external
Operation: Swivel heads
Connection: Cable
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
Type: ISAT
Stroke: 2 .. 50 mm
Transducer: external
Operation: Spring return
Connection: cable/plug
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
Type: ISAL
Stroke: 2 .. 200 mm
Transducer: external
Operation: Unguided armature
Connection: cable
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
|
|
|
The Series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision-machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. There are three basic models. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120 PLC Transducer Module.
|
|
|
These sensors have size, weight, and installation advantages over traditional rod-and-cylinder transducers such as LVDTs and linear potentiometers. They offer easier mounting than rotary synchro and RVDT sensors. Tested to DO-160D/ED-14D successfully.
|
|
The Celesco SP1 and SP2 String Pots and SE2 String Encoder, are compact, economical and durable.
These sensors are designed for tight spaces, high-cycle applications and generously allows cable misalignment. With 4 different measurement ranges and handy mounting brackets, the S Series is a perfect solution for many applications, from light industrial to OEM.
Output Signal Options: Voltage Divider (potentiometer), Incremental Encoder
Measurement Range Options: 0-4.75 in., 0-12.5 in., 0-25 in., and 0-50 in.
|
|
|
The FOD is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement. The FOD is well suited for difficult to reach locations and hazardous environments such as those containing explosive materials
|
|
- World's Fast Sampling Speed of 50 kHz
- Industry Best Accuracy of ±0.03% (LK-G10/15)
- Class Best Resolution of 0.0004 Mil (0.01 µm)
- Multifunctional Controller
- Simple, Menu Driven Software
|
|
|
|
|
|
The ODS Red-line program is a series of sensors based on optical triangulation, with different measuring ranges and resolutions. All made to be used environments, ranging from the very hot and harsh applications in the heavy industry to delicate applications in the laboratory. Some models are particularly appropriate for cold or hot rolling of steel and metals. The ODS Red-line sensors are used either for larger measuring ranges or for applications where a long stand-of distance is needed along with high resolution.
Nine different measuring ranges are available, the smallest cover 450 to 550 mm and the largest 2000 to 4000 mm. ODS Red-line sensors are available with measuring frequencies of 1 kHz, 2 kHz and 5 kHz. Higher measuring frequencies deliver shorter distance between the individual measuring points on a moving target, and also increase the possibility of averaging sufficiently to obtain the required high resolution.
All ODS Red-line sensors are supplied with a Select functionality, allowing the sensor to be programmed to calculate a user defined running average. Free software provides easy setting of the Select parameters.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
The MX1C is a self contained laser displacement sensor. Featuring a small size and high resolution of 50 microns (0.002"), the MX1C is perfect for small mounting areas with delicate applications. The MX1C is easy to align with its visible Red laser.The MX1C offers a 4-20mA analog output, and, a discrete transistor output for displacement determination.
The MX1C utilizes triangulation to determine object displacement. The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
|
|
The MX1C is a self contained laser displacement sensor. Featuring a small size and high resolution of 50 microns (0.002"), the MX1C is perfect for small mounting areas with delicate applications. The MX1C is easy to align with its visible Red laser.The MX1C offers a 4-20mA analog output, and, a discrete transistor output for displacement determination.
The MX1C utilizes triangulation to determine object displacement. The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
|
|
The MX1A and MX1B laser displacement sensors feature high precision laser beams which can detect infinitesimal displacements of up to 0.0004" (10 microns). These laser sensors provide extremely accurate results with a linear relationship between analog output and detected distance. For example, they can detect objects with very low surface reflection characteristics, such as black rubber.
The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
The MX1A and MX1B laser sensors can be combined to determine the thickness of an object. Uniform production results can be obtained when layering materials by providing a precise calculation of the finished thickness. The MX1B also provides a digital readout for easy setup and monitoring.
|
|
The non-contact Gemco LPS Linear Position Sensor
uses fi eld proven and reliable magnetostrictive
technology to deliver accurate, absolute and
continuous machine positioning.
|
|
|
|
|
|
Description for pictured GEL 176 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 177 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 220 Incremental Linear Scale:
* 5-year-guarantee on production defects
* Robust system for harshest conditions
* Ideal for application in wood and metal manufacturing (plate shears, presses, cylinders)
* Ideal for application in food and chemical industry
* Anticorrosive and wear-resistant measuring system
* Dirt wipers on the encapsulated measuring system
* Simple mounting
* Maintenance-free
* Dew-point-proof
* The measuring rods may be shortened to any length
* Reference mark integrated (zero signal)
|
|
Standard industrial applications:
Gage head diamètre 8 mm, short stroke.
stroke to (until) 300mm Diameter 9, 12 and 20 mm
Rugged environment applications:
Watertight, submersible up to 600 bars, transducer for hydraulic actuators. ATEX environment.
Rugged environment, sensors with guide and ball joint.
|
|
High accuracy, rugged gauges.
Suitable for installation on machines.
Magnetic principle
Excellent resistance to workshop conditions (BP:IP64). Resistant to oil, water, dust, vibration, and shock.
Accuracy: ±1 µm
Resolution: 0.5µm
Measuring range: 10 mm/0.39" and 25 mm/0.98"
High measuring force (BP/BS)
Low measuring force (BN/BL)
Easy installation
A variety of accessories available
|
|
Rugged environment applications
Watertight, submersible up to 600 bars, transducer for hydraulic actuators.
Rugged environment, sensors with guide and ball joint
Application : radioactive, offshore (ex ATEX), sensors for servo-actuators
|
|
|
|
