|
|
The product featured on the photo is a CSTN display.
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
DF30 is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
The new SI 3000 range of Controllers are specifically designed to operate with Solartron's extensive range measurement transducers, and/or third party transducers, such as pressure and temperature.
One of the main features is an intuitive menu-driven display, which can be programmed to display readings, set Limits/Alarms, Peak Hold, Track, or act as a Data Logger for inputs from one or two transducers
The SI 7500 is a multi axis metrology display that connects to a Solartron Metrology Orbit Network and accepts up to 16 Orbit Module inputs; such as Digital Probes, Linear Encoders and Analogue Input Modules. It features intuitive displays, helpful audio cues and user defined formulas. The SI 7500
also reports dynamic Min/Max measurements, provides SPC analysis from an integrated database and offers connectivity to PC's and other peripherals.
|
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A +Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
Looking for a way to trim cost and save space? Check out Red Lion's CUB5 Panel Meters. The meters are less expensive and less than half the size of most standard 1/8 DIN panel meters. Less panel space and the ability to utilize smaller enclosures make these meters the perfect solution for any budget.
Don't let the size fool you...these meters are packed full of features! The large .48" (12 mm) display, optional single or dual set point control output modules, and optional RS232 or RS485 communication modules allow these meters to handle even the most demanding applications.
CUB5 Counter/Rate Indicator
CUB5I DC Current Meter
CUB5P Process Meter
CUB5RT RTD Meter
CUB5T Preset Timer and Cycle Counter
CUB5TC Thermocouple Meter
CUB5V DC Voltmeter
Optional cards:
- CUR5RLY (1 relay output module)
- CUR5SNK (module 2 NPN transistors - only for analog models)
- CUB5COM1 (communication RS485)
- CUB5COM2 (commnunication RS232)
|
|
Bright LED display with 15 mm size
Master- and Slave operation with Baud rates up to 1 MHz
Easy to set up by two front keys and menu dialogue
Programmable scaling of display and free zero definition
Programmable bit blanking, round-loop mode and more
Aux. 24 V output for encoder supply
Standard housing 96x48x150 mm
115/230 VAC or 17-30 VDC power supply in one unit
|
|
|
|
|
|
The EL display is ideal for medical, transportation, military, and industrial applications that need to highlight important information under extreme conditions. Planar's EL displays endure extreme temperatures (-50-+85 celsius) and high vibration environments.
EL320.240-FA3 is 320 column by 240 row flat-screen, multi-colour display based upon thin film electroluminescent (TFEL) technology. Ted and green sub-pixel elements are formed on an amber, ALD-based substrate by applying an organic filter to a glass cover panel. Offering the same high performance, visual characteristics, and “at-a-glance” viewability of Planaräs monochrome EL-product line, the EL320.240-FA3 will add critical colour capabilities to the inherent ruggedness of this proven display technology.
Model: EL320.240 FA3
Technology: Thin Film Electroluminescent (TFEL)
Diagonal: 4.9” (12,3cm)
Pitch: 0,31 mm
Brightness (typical): 85 cd/sq.m
Viewing angle: > 160
Response time: < 1 ms
Operating temperature: - 50 - +85 celsius degrees
Video interface: 4 bit AMLCD
Other features: Red/Green/Yellow, multi-colour, 16 colours
Dimming
RoHS compliant
www.planar.com
www.planarembedded.com
|
|
|
ADOS manufactures a wide range of weight serial repeaters that allow to find the best solution for all different industrial environments. Versions with current or voltage analog input are also available.
|
|
NOT RECOMMENDED FOR NEW DESIGNS.
Hexadecimal display containing a four-bit latch, decoder, driver, and 4 × 7 light-emitting-diode (LED) character with two externally-driven decimal points in a 14-pin package. The LED driver outputs are designed to maintain a relatively constant on-level current of approximately 5 mA through each LED that forms the hexadecimal character. This current is virtually independent of the LED supply voltage within the recommended operating conditions. The decimal point anodes are connected to the LED supply; the cathodes are connected to external pins.
|
|
Features
- 0.2INCH DIGIT HEIGHT.
- LOW CURRENT OPERATION.
- EXCELLENT CHARACTER APPEARANCE.
- I.C. COMPATIBLE MECHANICALLY RUGGED.
- GRAY FACE,WHITE SEGMENT.
- PACKAGE : 650PCS / REEL.
- MOISTURE SENSITIVITY LEVEL : LEVEL 4.
- RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
|
|
Example:
MONOCOLOUR OUTDOOR DISPLAY ED 40
Technology LEDs
Number of lines 1 to 4 lignes
Brightness Outdoor
Brightness adjustment Yes
Colour Red (option Amber ou Green)
Operating modes 18 modes
Character set 12 types
Built-in animations Yes (100)
Programming mode TC3 programming keyboard or Software
Interface communication RS232, RS485, Ethernet (option)
Temperature probe Yes
Type of case Aluminium, IP 54 RAL 5004
Operating temperature range -10° to +45°C
Power supply 230 VAC / 50-60 Hz
Mounting support Wall mount support Included
TECHNICAL SPECIFICATIONS
Pixel diameter 5 mm
Nombre de LEDs par pixel 1
Microprocessor 16 bits
Message capacity 128 kb
Angle viewing +/- 30°
Front face Polycarbonate
Baud rate de 2400 à 38400 Bauds
|
|
TYPE: LCD-COG-module LCD-DATA:FSTN-mode transflective / positiv graphic
BACKLIGHT: LED edge amber CONTROLLER: SSD1815 ; FEATURES: COG module with special shaped glass + special shaped FPC ; REFERENCE NO. 123 ; TYPE: LCD-module LCD-DATA:FFSTN-mode transmisive / negative
alphanumeric + segment BACKLIGHT: bicolor LED red and yellow-green
CONTROLLER: KS0066 FEATURES: LCD + Backlight + tact switches +
customers circuitry REFERENCE NO. 090
|
|
|
Edwards Message Centers and Edwards lamp annunciators have proven themselves as the standard of reliability for commercial and institutional applications.
|
|
Series S102/SX102
Digital displays for panel mounting
Numeric and alphanumeric displays
4-, 5-, 6-, 8- or 14-digit LED display
Character height: numeric 14 and 25 mm, alphanumeric 18 and 30 mm
Interfaces: Profibus, Modbus, serial, parallel, analog
Comfortable setting of operation modes and parameters via menu
Bright red LED displays
Reduced mounting depth
Addressable
|
|
At airports and car-parks, production lines and inside buildings, ANKA® large displays by Wöhrle are essential everywhere for rapid and direct information.
Not only do they display text and figures in sizes configurable by the user. Icons and graphics can be displayed clearly, and in many colours too, thanks to the dot matrix LED displays. This considerably increases the attention-getting value.
ANKA® large display units are housed in solid enclosures of protection type IP 65.
The modular and flexible system design provides a number of different expansion options:
- LED large displays, single colour (red, green, yellow, or mixed configuration)
- character height 50 mm, up to 15 lines, up to 40 characters per line.
- LED large display units, multi-colour (red, green, orange). Character heights can be altered:
• at 120 mm character height : one line display 3-20 characters per line
• at 50 mm character height these values are doubled.
|
|
New Series SX502
Alphanumeric large size displays
Multifunctional text display
Standard fixed text memory
Character heights 33 and 50 mm, switchable to 66/75
or 100/120 mm respectively
Red or multi-color LED (switchable between red/green/orange)
Extremely bright SuperBright LEDs for outdoor use
2, 4, or 8 lines with 20 or 40 characters per line
Interfaces Profibus, Modbus. serial, Ethernet TCP/IP, further interfaces
Different kinds of presentation: marquis text, paging, blinking etc.
Protection type IP54 and IP65
Presentation types can vary within a line
Convenient control with an optimized and ergonomic
command set
Optional proportional lettering
Setup menu for setting parameters and operating modes
Degree of protection IP54 and IP65
Equipment packages for outdoor applications
Unit versions readable from one or both sides
Downloadable/uploadable fonts and character sets
|
|
- Product designed and produced by Topway ourselves.
- Character (Alpha Numeric) display.
- Characters x Line (5x8 format):
8 x 1, 8 x 2, 16 x 1, 16 x2, 20 x 2, 20x4, 24 x 2, 40 x2
- LCD Mode: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option
- LCD Controller: KS0066 or Equivalent
- We have full product line with different module size, display model, 3v/5v power supply as options.
|
|
* STN Character Display Modules in the size 8x1 to 40x2.
* STN Graphic Display in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
* STN Graphic Display in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
|
|
- We have 3.5" and 5.7" TFT LCD Module for Industry application
- Display Mode: Color TFT
- Pixels: 320(RGB)x240
- White LED Backlight, Digital interface
- Outline Dimension (mm): 126.08x101.54x4.74mm ---5.7"
76.9 x 63.9x3.2mm ----3.5"
- We also have optional control board for MCU interface directly and Touch panel for your choice.
|
|
Visualization with TFT :
MICRONOR work with the largest manufacturer in visualization together. By our own designing and assambly line we can offer a total solution to you, according to your requirements. In the following overview you can see the different vizualization techniques and products.
* TFT - Small Size in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
* TFT - Medium Size in the sizes of 3,5" to 10,4" with Backlight LED and Transmissive Display mode.
|
|
COMPACT ELECTRONIC DISPLAY UNIT
Quick Read family is made up of three slim, compact versions, each complete with analog and digital displays, and easily programmed via local keypad.
The 3-colour (green, yellow and red) analog display and 8-digit alphanumeric display provide clear definition and easy reading of the measurement results.
|
|
|
As we have solid experience on LCD module design, we also can support you on customized LCD module per all kinds of your request (either TN, STN, FSTN module), just send us your techinical specification, let us assist you on the following.
|
|
Digital indicators Type AN41-44
Fields:
Chemical and Petrochemical Industry, Food and Beverage Industry,
Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
Digital indicators Type AN 42
Fields:
Chemical and Petrochemical Industry, Food and Beverage Industry
Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
|
|
LED display
Type LED-0201/D025
Segment height: 25 mm
|
|
1/8 DIN Advanced Digital
This range consists of rotary pulse, timer interval and up-/down-counting pulse indicators. These indicators with digital input feature a clear and easy-to-use colour-change display and all have an IP66 housing. K3HB series consists of rotary pulse, timer interval and up-/down-counting pulse indicators. Extra functionality can be added using option boards (max. 3): sensor power supply/output (incl. communication and linear voltage output), relay/transistor output (incl. DeviceNet) and event input.
|
|
|
The VM500 vibration monitor offers incredible versatility and functionality in a small 1/8 DIN package, for an attractive price. It provides fully scalable 4-20 mA output for your control system, and also includes two form C relays for a variety of uses. The VM500 is available in dis-placement, velocity, acceleration and even temperature models for 10, 100, and 500 mV/g accelerometers and "J" type thermocouples. Options include RMS or Peak display, as well as a wide range of high pass and low pass filters to focus on frequencies of interest.
|
|
Digital-displays in a field-housing or switchboard-housing are easy to install on site and to increase the transparency and overview.
Characteristics:
- Easy installation because no supply is needed
- Adjusting scalable
- Digit free choose
- Automatic zeropoint and polarity compensation
- Different variations
|
|
MRR-841
- Digital Display / Converter
- Output: 0 to 5 Vdc
- Input: 0 to 999 Hz
MRR-900
- Digital Display / Converter
- Output: Digital Display; High & Low Alarms
- Input: 0 to 1 kHz
|
|
The FAGOR 8055i MC Turnkey Package is a pre-engineered CNC & Servo System Package.
Specifically designed as a low cost solution for upgrading or retrofitting small and mid-size Milling machines to a fully controllable very powerful CNC Milling machine.
Every Turnkey Package is built to your machine specifications, fully tested and ready for immediate integration to your machine upon arrival.
The CNC 8055i MC utilizes a Dual Operating System. The unique and very powerful operating system consists of 2 systems within 1 control.
Utilizing a 100% very easy to program Icon Key based conversational programming system or a Conventional ISO G-code programming system within the same control.
The Fagor “Icon Key” programming method greatly simplifies the programming process even compared to more conventional conversational systems. Graphic assist is utilized within all programming screens thus enabling “true” fill in the blank programming.
|
|
TFT COLOR LCD
HIGH CLARITY VIEW FROM ANY ANGLE
SOLID GRAPHICS
3D SIMULATION
DISTANCE TO GO
UL APPROVAL
- Radius / diameter display
- Mm / inch conversion
- Fine / coarse resolution
- Absolute / Incremental
- Axis preset / reset
- Display-off mode
- Angular axes
- 20 reference points
- Linear compensation
- Tool compensation
- Multi-point compensation
- (40 points per axis)
- Scaling factor
- Feedback pulse monitoring
- Software limits
- Hysteresis factor
- Machining axis rotation
- PC communication via USB adapter
- Auto shut-off after 30 minutes
|
|
|
|
