|
|
LH51/52
Digital Readout Displays
Compact display with numerous functions for milling machines (LH51) and lathes (LH52).
* Selectable display resolution
* Selectable absolute/incremental display
* Linear error compensation
* Reset, preset and recall
* Centerline and bolt hole* calculations
* Datum point memory
* Power loss data memory
* Radius/Diameter selection
* Self-diagnostics
* Direct inch/metric conversion
* 9 Tool Offsets**
* *LH51 only
* **LH52 only
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
|
The DS-3000 Four-Channel LED Display is an integral device incorporating display, interface device and a controller combined in one. It allows users to connect up to four of our iLoad & iLoad Pro Series load cells and view individual and/or total loads in three different units: Kilograms, Pounds and Newtons.
|
|
Complete Display Solutions
In a world where consumer demand for information is burgeoning, Densitron ensures that the display solution brings the product capabilities to life.
Densitron actively works with our client partners and consumer research organisations to deliver exciting product display solutions for the designs of tomorrow.
We have extensive experience in design and manufacture of customised display modules as well as standard colour and monochrome display solutions for electronic devices. We are also proactive in the development of the product and packaging to provide a complete turn-key solution.
|
|
|
|
|
|
Lumitex uses sheets of fiber optic cloth to create LCD backlights of custom shapes, sizes and configurations. In a typical design, we use two or more layers of Woven Fiber Optic Cloth to form a rectangular light emitting area. This product is typically 0.068” (1.7mm) thick and anywhere from 1 sq inch to over 100 sq inches. The fibers coming off one end are then bundled into a circular ferrule and coupled to one or more LED light sources. An alternatives technology is our thinner UniGlo technology to create backlights as thin as 0.013” (0.33mm).
Lumitex Fiber Optic LCD BackLighting provides long life, low power, inert, maintenance free backlighting for all LCD and Display designs.
Longer Life - Durable fiber optic panel never needs replacement. Remote light source offers 10,000 to 100,000 hours life and easy replacement.
Lower Power - Sources require less power than EL, CCFL, or LED Array and no inverter. As low as 10-20mA at 2vdc
Compact Size - Panels are thin and sources are smaller than EL or CCFL inverters.
Heat/EMI Free - Fiber optic panel adds no heat or EMI to interfere with switch operation
Durable - Optical Fibers are not affected by extremes in humidity (0% to 100%) and temperature (-40 to +85 deg C)
Very Low Startup Costs - Minimal Engineering charge and usually no tooling. Low prototyping cost with no minimums.
|
|
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
Series SGX500
Graphic boards
Graphic LED Matrix Displays for presenting texts,
graphics, videos, animations...
Standard sizes 1,0 x 0,5 m, 1,5 x 0,5 m, 1,5 x 1,0 m
and 2,0 x 1,0 m; further sizes on request
Multicolor (red/green/orange), 256 color shades
Embedded industrial PC with sound output
Single- and double-sided unit versions
Protection type IP54
HTML-compatible
|
|
TN, STN, FSTN Technologies
For segmented or alphanumeric / graphic displays; TN with colour segments and background other than B/W ;CSTN, TFT technologies
For graphic displays up to 5'' diagonal size
|
|
The product featured on the photo is a CSTN display.
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
General description:
Gill Wind Speed Indicators are compatible with WindSonic and WindObserver anemometers, enabling the display of wind speed and direction using high visibility LED technology.
Gill Wind Speed Indicators are available in two display formats (standard and marine) and 110 or 240 V ac operation with RS422 or NMEA inputs.
|
|
LED display
Mounting vertical
Segment height: 10 m
|
|
Series S302/SX302
Numeric and alphanumeric large size displays
Character heights 57, 100, 160, and 250 mm
Displays with brilliant red LEDs (optional blue, green, white)
Light reflecting display elements in LRD®-technology
Interfaces Profibus, Modbus, serial, parallel, analog; further interfaces on request
Single- or double-sided displays
Displays with dimension symbols
Set-up menu for setting parametersand operating modes
Equipment packages for outdoor applications
Protection type IP54 and IP65
|
|
LEDI POOL DISPLAYS
Time + temperature zone display for swimming pool
The LEDI®POOL displays the temperature of the water for one or two baths and gives alternatively the time/air temperature information.
The LEDI®POOL can be installed in main entrance or in the swimming zone.
Complies to EMC Directive 98/366 EEC including directive 93/68. EN 55024, EN 55022, EN 60950
|
|
XC-Boards®
Information systems for production and employee information
Information systems for production and employee information present production data, reduced to the basic essentials, directly at the place of production. Being legible over far distances, they provide the employees with a quick overview of the situation and motivate them to commit themselves personally to accomplish a set goal - motivation begins with information.
|
|
LEDICOM range: Electronic message displays
Works under a Web browser, no need of software installation. The display has it own IP address.
The LEDICOM series declines in 3 models:
- Model 4LTE : 4 lines of text + LCD 12” screen displays pictures and digital video transmission Loudspeaker included
- Model 4LTH : 4 lines of text + LEDI 4/60 clock blue & yellow LED lamps.
- Model 8LT : 8 lines of text
Text in VFGD technology, blue colour
Electronic message display to be directly put on a support, to be embeded or to be put on its (optional) stele. The case consists of a cube in elm and an aluminum box. Securit glass front.
|
|
|
|
|
|
ANKA® Display systems
ANKA® displays by Wöhrle are your indispensable aid to communications. They provide information, help, warnings and support. Several language levels within one device mean that your information system is international.
The display systems are easily coupled to the PLC or PC either serially, or via fieldbus. We supply drivers for a large number of control systems with every display unit.
They are particularly cost-effective in that up to 250 subsidiary displays can be operated from one display unit. It is also possible to form terminal systems. And up to 15 groups each with up to 15 large displays can be controlled from one serial port. So there is no limit to the opportunities for combination.
ANKA® text display units
ANKA® text display units by Wöhrle are used to increase the availability of automatic processes. The choice of equipment is huge. From straightforward text monitors to the most advanced systems. Display unit designs range from 2 x 20 characters to 4 x 40 characters.
ANKA® text display units with keyboard also enable reactions from the operator to be entered, as well as event reporting.
|
|
Series SX402
Digital displays for panel mounting
Interfaces: Profibus, Modbus, series, parallel
2 x 20 and 4 x 20 caracters with 5 mm height; 2 x 20 caracters
with 9 mm height; 2 x 40 caracters with 4,7 mm height
Brillante Vakuumfluoreszenzanzeige (VF-Display)
Comfortable setting of operation modes and parameters via menu
Reduced mounting depth 66 mm
|
|
|
|
|
|
High Resolution SmartSwitch and SmartDisplay are programmable modules that display graphics for alphanumeric characters, animated sequences, with a 64 color capability arrangement.
An integrated liquid crystal display provides wide viewing angle with high contrast and clarity. The modules are Epoxy Sealed with Straight PC Terminals to prevent entry of solder flux and other contaminants. Standoffs are utilized to allow for easy, secure mounting and alignment. The High Resolution SmartSwitch has a life of 1,000,000 actuations.
Key FeaturesHigh
- resolution of 64 x 32 pixels (Horizontal x Vertical)
- 64 colors of backlighting
- Operated by commands and data supplied via SPI communications protocol
- Can display as many as four lines of text with ten characters
- Viewing Area:
* High Resolution SmartSwitch:
15.0 x 10.8mm (Horizontal x Vertical)
* High Resolution SmartDisplay:
13.9 x 10.6mm (Horizontal x Vertical)
- Incorporates bitmap display function
- General brightness of backlight is variable in eight steps from dark to bright
|
|
OSD020AMQCIF-C:
- Diagonal Size: 2.0 inch
- Resolution: 176 x RGB x 220
- Overall Dimensions: 37.3 x 50.25 x 1.6 mm
- Color(s): 262k
- Interface: Selectable MPU 18/16/9/8-bit
|
|
OSD has been manufacturing and marketing Large Molecule passive matrix OLED products since 2003. These popular products have been designed into communication systems, industrial control systems and many types of consumer electronics. So, it is with great regret that OSD has announced it is withdrawing its entire PLED module line from the marketplace.
Recently several of the world's largest PLED panel manufacturers have announced their withdrawal from PLED production because of financial reasons. The withdrawal of these suppliers will have a direct effect on the availability of critical components that sustain OSD's PLED module production.
|
|
|
|
|
|
LED strip indicator 584
The "semi-analog" LED strip indicator displays the measured value using 71 LEDs. This indicator is designed to withstand very stong vibrations yet has the familiar look of an analog indicator.
The two standard housing sizes and flexible inputs make the indicator a universal solution for all applications with increased vibrations.
Developed for large diesel engines, the indicator can be used directly on ships' engines (GL-approved models are available) and on any machine or system where high vibration resistance is required.
Ships' engines
Large engines
Pavement cutters
General road construction machinery
Turbines
Shredders
Rock crushers
Strainers
Features:
LED indicator (71 LEDs + 1 power ON)
1.5% accuracy
Display on 320° arc
Sturdy metal housing
Special design for strong vibrations
100mm or 96x96mm with changing scale
Inputs: Voltage input 0-10V
Current inputs: 0-20 / 4-20 mA
Frequency input: 0-10 Hz / 0-20kHz (PNP/NPN)
Sine wave input (e.g. for inductive sensors)
Fine tuning of +/- 10% possible
Options:
Acceptance from shipping certification agencies available on request.
|
|
The ATE300 is a multichannel indicator specially dedicated to flush-mounting (or wall-mounting) installations.
• Alternating display of 1 to 3 parameters
• 3 analogue inputs : 3 x 4-20mA or 3 x 0-10V
• 1 RS 232 digital input for KIMO external transmitter (class 200 & 300)
• 1 RS 485 digital input/output (Modbus protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control
• Electroluminescent front display, made of brushed stainless steel or white
lacquered
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
Series 1000 Process Indicator and Alarm
Series 1300 Smart Indicator/Transmitter -- 1/8 DIN, SQRT Function, Universal Inputs, Alarms/Analog Retransmission Outputs
Model A-701 Digital Panel Meter/Power Supply
Model A-705-20 Loop Powered Process Indicator
Series BPI Battery Powered Temperature Indicator -- RTD or T/C Input, 4-Digit Display, Selectable °F or °C
Series DPMA Adjustable LCD Digital Panel Meter -- 1/8 DIN, Loop Powered, Large 3-1/2 Digit Display
Series DPML LCD Digital Panel Meter -- 4-1/2 Digit LCD, Selectable Engineering Units
Series DPMP LCD Digital Process Meter -- 3-1/2 Digit, User Selectable Engineering Units, Panel Mount
Series DPMW LCD Digital Panel Meter -- 3-1/2 Digits, Window Mount
Series DPMX Extra Large Digital Panel Meter -- 3-1/2 Digit LED Display, 2.3" Segment Height, Process Inputs
Series LCI108/LCI108J 3-1/2 Digit Panel Meter -- 3-1/2 Digit Display, Self-Tune/Fuzzy Logic
Series LCI132 Process Indicator -- 1/32 DIN, Fully Programmable
Series LCI308 & LCI408 Panel Meter Indicator -- 1/8 DIN, High Accuracy, Peak & Valley Display
Series LCI508 & LCI608 Digital Panel Meter -- 1/8 DIN, Process, Load Cell & Potentiometer Input
Model LPI Loop Powered Indicator -- Square Root Function and User Defined Curves 4-Digit LED
Model PM706 Temperature Panel Meter -- Dual Alarm, Relay and Analog Output
Series SI Smart Indicator -- Temperature or Process, Interchangeable Output Modules
|
|
Digital Display For Flo-tech ActivaTM Sensor Arrays
Remote flow meter monitoring
Totalizing
Alarm processing
Process control
|
|
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
Universal Inputs: DC Voltage/Current, T/C, RTD, Strain
Accuracy: ±0.005% rdg
6-Digit Tri-Colour LED Display
Up to 166 Readings Per Second
10 Point Linearisation
4 Isolated Open Collector Outputs Standard
Isolated Analogue Output Optional
Four Relay Outputs Optional
Optional Ethernet or RS-232/RS-485
IP66 Front Panel
|
|
|
|
|
|
PAX Series : Large range of Intelligent panel meters
The PAX Meter is the workhorse of our panel meter line-up. From its sunlight readable display to the wide variety of field-installable options cards, the PAX Meter will easily handle your application requirements. Select from the widest range of inputs in the industry, including models for both digital and analog signals. Their Comms capability allows data collection at various points of the machine and communicates the information to your management system, while still providing the machine operator with a localized display. Installing a complete system? Learn how to put a PAX Meter to work for you.
PAXC - Counter
PAXCK - Timer & Real Time Clock
PAXD - DC Volt & Current Input
PAXDP - Dual Process Input Meter
PAXH - AC True RMS Voltage and Current Meter
PAXI - Counter Rate Meter
PAXP - Process Input Meter
PAXR - Rate Meter
PAXS - Strain Gage Input
PAXT - Thermocouple & RTD Panel Meter
PAXTM - Preset Timer
Display of 5 LED digits of 14mm, with variable intensity for good outdoor readability (factor 1 to 15)
These intelligent solutions can be enabled with optional plug-in cards, for set point alarms (2 or 4),analog output and communications (RS232, RS485, Modbus, Devinet, Profibus), enabled Ethernet via external module (ICM8)
|
|
• 3 dgt LED + dummy zero, μ-based
digital indicator, for TRMS AC current and voltage
measurements
• Dip-switch-selectable ranges
• Front dimensions: 48 x 96 mm
• Front protection degree: IP 50 (IP 65 on request)
3-dgt plus dummy zero μPbased indicator, double input for AC current or voltage
measurements. 112 selectable primary ranges. Housing for panel mounting and IP 50 front protection degree (IP65 on request).
|
|
A very powerful micro-controller manages and processes all the information [position, calculation, etc.] trasmitted by the transducers or entered by the user. Having such a highly evolved but user-friendly digital Readout means increasing the production performance of the machine on which it is installed considerably.
|
|
|
|
