Distribution valves

DN: 15 mm - 20 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

The modular GEMÜ 553 distribution valve comprises various globe valve modules. These can be equipped with manual or pneumatic actuators. The downstream media is isolated using a PTFE ...

DN: 4 mm - 25 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 150 °C

... diaphragm globe valve has a pneumatic actuator. All medium wetted parts are made of PTFE. The external operator parts are made of PVDF. An integral optical position indicator is standard. In addition to 2/2-way valve ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 120 °C

... GEMÜ 428 soft seated butterfly valve made from stainless steel or brass is motorized. A manual override and an optical position indicator are integrated as standard. With its rounded and polished disc edges, the butterfly ...

DN: 12 mm - 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C

... following advantages: - uniform distribution of shutter pressure on the diaphragm seal - reduction in the tightening torque of the screws fixing the actuator to the valve body - reduced mechanical ...

DN: 40 mm - 300 mm
Pressure: 25, 10, 16 bar
Temperature: -29 °C - 80 °C

RAVE Type - Diaphragm Actuated Hydraulic Double-Chamber Control Valve for use in water distribution for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level ...

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Pneumatic gate valve body material: Stainless steel, Carbon steel end connection: RF, BW, RTJ operation: electric /pneumatic/ hydraulic actuators

DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C

Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... greater than the effective request; this implies the necessity to utilize devices able to control the distribution of the water without wasting it. Needle valve is especially designed to realize the function ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...

DN: 10 mm - 100 mm
Pressure: 16, 20, 10 bar
Temperature: 80 °C

general processes, heating and multi-fluid applications compatible with brass BALL : hard chrome-plated brass SEALS : PTFE

DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C

for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at ...

Pressure: 700 bar - 1,500 bar

... NiSoX-Valve technology introduces a complete change in high pressure homogenization technology. The NiSoX-Valve design optimizes different fluid dynamic effects employing the energy in the most efficient ...

DN: 15 mm
Pressure: 6 bar
Temperature: 40 °C

Ideal for realising dosing and distribution functions in confined spaces High economic efficiency due to low space requirement and minimal installation work Modular extendible to any number of control heads High availability ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 50 °C - 90 °C

thermostatic balancing valve for hydraulic balancing of riser and distribution pipes for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection wetted metal ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 50 °C - 90 °C

thermostatic balancing valve for hydraulic balancing of riser and distribution pipes for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection wetted metal ...

DN: 15, 20 mm
Pressure: 16 bar
Temperature: 50 °C - 90 °C

thermostatic balancing valve for hydraulic balancing of riser and distribution pipes for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection wetted metal ...

DN: 15 mm - 300 mm
Pressure: 16, 25, 40, 64 bar

•Pressure Balance: Bellows, Sleeve Inherent flow feature: straight line, equal percentage, quick opening Executive body signal interface: M12X1.5, M14X1.5 Regulation accuracy: ±10% Actuator: Film, Cylinder Plated Material: ...

DN: 15 mm - 150 mm
Pressure: 10, 16 bar

• Inherent now feature: quick opening • Executive body signal interface: M12x1.5, M14x1.5 • Regulation accuracy: 3% • Plated Material: Stainless steel • Seal: PTFE/PPL/Stainless steel/Hard alloy • Design Standard: ASME ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of gaseous fuel flow. This ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This ...

DN: 65 mm - 300 mm
Pressure: 40, 35 bar
Temperature: 180 °C

... operating cycles igh-performance valve with extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized ...

DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C

... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...

DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C

... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...

DN: 1.5 in - 6 in

GAS VALVES Floating ball valves Ball valves are cut off devices suitable for use both on natural gas distribution network and for liquid service when high performance ...

DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C

In the EFC Dispensing valves, the position of the precision throttle directly connected to a stepper motor determines the flow rate. This drive technology allows the set position to be held even without ...