Dock levelers

34 companies | 165 products
Dock levelers
  • Operation
    Submit
  • Type
    Submit

The electro-hydraulick dock levellers are very useful during loading/unloading operations because they bridge the gap between the floor and the lorry bed, thanks to their definite lip length.

They are the most stressed constructions...

Electro-hydraulic dock levellers with teklescopic lip

The electro-hydraulic dock levellers with telescopic lip are used above all in case of sideways loading.

This...

{{productDetail[22513]}}

The Crawford 6010S Swingdock is the standard solution in general industry applications, due mostly to it's ease of operation. The swing lip of the Crawford 6010S Swingdock safely bridges the gap between building and vehicle bed.

To enable a safe and efficient process...

The Crawford 6010SA Swingdock Autodock acts as the base of a complete Crawford Loadhouse, being the loading platform of a complete Loadhouse comprising all relevant components; leveller, shelter and door. With its self supporting frame, it is easy to integrate with any building and is usually positioned outside the building, thereby maximising...

The Crawford 6011S Swingdock is a heavy duty dock leveller with a load capacity of 100 kN.
The swing lip of the Crawford 6011S Swingdock safely bridges the gap between building and vehicle bed.

To enable a safe...

The Crawford 6010SM Minidock is a manually operated dock leveller, specifically developed for operators of fleets of standardised vehicles with the same bed height.

The Crawford 6010SM Minidock was developed to be an easy to operate and economical solution in environments...

The Crawford 6020T Teledock, i.e. the dock leveller with a telescopic lip, is the universal and most flexible docking system. It is suitable for every loading situation - regardless of complexity.

The main advantage compared to other levellers...

{{productDetail[31434]}}

Prefabricated pits built with zinced sheets. They allow for a rapid and exact construction, starting from the front wall only. Easy to assemble in 20 minutes, the prefabricated pit allows to immediately cast the pavement, without subsequent masonry re-makes or perimetrical further...

Finished Leveller with pouring containment by perimeter sheets, to be laid into the dock with front wall and slab conform to drawing. To be levelled at final pavement and cast.

The platform is protected from aggressives by a cover that is...

CASTLE" dock leveller, pre-mounted on a frame, to be laid on a slab built (as per drawing) on the bottom of the traditional pit. The system is the traditional original one, also if the ACCESSORY and CAMPISA systems represent today about the totality of the installations....

C" SUSPENDED dock leveller, pre-mounted on a frame leveller to be welded to the rods cast into the cement all around the pit rim. The pit can have the bottom reservation for tail lift, like the shown case (picture A), that requires the heavy reinforcements for sustaining the overhangs.

There is a risk of fractures into the pavement all around the pit, because of the different dilatation...

The commercial vehicles have platforms +/- 50 cm high from floor and rear doors which should be opened at 90° only, to allow the docking of contiguous vehicles.

CAMPISATRADE has the perfect length to open the vehicle doors not over 90° and allows,...

{{productDetail[28630]}}

DLHT series electrohydraulic dock leveller with sliding telescopic access ramp are the most effective devices intended for loading equipment access to truck body from the warehouse during loading and unloading. They are used when it is necessary to position the access ramp in the...

DLHH series electrohydraulic dock leveller with rotary access ramp are optimum devices which make it possible to organize the transshipment site and to provide quick loading and unloading....

MODL series mechanical dock leveller does not require power supply and may be used when there is no electricity and it is impossible...

{{productDetail[62536]}}

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

This heavy-duty dock-edge leveller is made of special aluminium alloy, and...

Rail-mounted dock boards provide a simple and flexible solution...

{{productDetail[19183]}}

The Loading Systems 232M is an electro-hydraulic dock leveller with a hinged lip. Both the platform and lip are hydraulically driven.

Lips
The lip has a standard...

The Loading Systems 233M is an electro-hydraulic dock leveller with a telescopic lip. The platform and lip are hydraulically driven.

Telescopic lip
The standard...

A single dock leveller solution which facilitates articulated vehicles and delivery vans? The Loading Systems 253 can accommodate...

The parallel dock leveller ensures easy loading and unloading of end loads and high stacked goods. The dock leveller is...

The Loading Systems 105 is a mechanical mini dock leveller with an extendable lip. The platform...

{{productDetail[18497]}}

The RHJ-5000 Jumbo™ Dock Leveler is the industry's...

The RHH-5000 High Capacity Hydraulic Leveler...

The RHH-5000 High Capacity Hydraulic Leveler...

Rite-Hite's RHV Vertical Storing Hydraulic Dock...

RHA Air-Powered Dock Levelers offer benefits similar to hydraulic levelers and are designed to prevent potential stump-out problems with no legs or rollers required to sense a free-fall situation.

RHA Air-Powered Dock Leveler Features and Benefits

Smooth transition design includes a constant-radius rear hinge, two-point crown control on the front lip hinge and an optimized...

{{productDetail[36057]}}

Special Features and Benefits

The controllers are assembled in our U.L. approved panel shop.
Hydraulic anti-interflow...

These truck levelers have the cylinders straddling the platform. The units sit on top of the ground or in very shallow pits so they do not offer any down travel. In order to achieve the equivalent of down travel, some applications create a down slope...

{{productDetail[39530]}}

Stationary with collision guard and cable winch...

Stationary to bridge differences in height...

{{productDetail[13903]}}

The hydraulic dock leveller with hinge lip (400 mm or 500 mm) is available as pit model, dock box model and hang-in frame model to allow easy configuration...

Improve the work environment and reduce dock shock our Telescopic-Lip dock leveller provides smooth transition between the loading dock and the trailer preventing the jolt forklift truck drivers can experience when crossing between the leveller and the vehicle.

The...

{{productDetail[6154]}}

Hörmann dock levellers are well-designed solutions for precisely compensating the differences in height between various lorry floors and ramps. Using a dock leveller, the load can be moved in or out of the lorry in a single horizontal movement.

A...

{{productDetail[5166]}}

Use
A bridge between the buildings floor and the truck loading space. Platform with overhanging flap at the front, made from slip-proof material and with a lower section reinforced...

{{productDetail[115225]}}

Dockleveler - Truck Actuated - RU series

Specifications:

...

The Mechanical Dockleveler is constructed of heavy duty ." checkered plate deck (55,000 PSI) steel to support the understructure...

The Electric Hydraulic Dock Leveler is ideal for high usage dock areas. The hydraulic design is state of the art and consists of a simple push of the button operation. The operator pushes and holds the "raise"...

The Mechanical Edge-O-Dock is operated by placing the actuation handle into...

{{productDetail[98291]}}

Height gaps between the dock and vehicles can cause problems when loading or unloading goods. It can lead to damage of equipment or goods,...

{{productDetail[8350]}}

Wilcox offers a wide range of dock leveler capacities, deck sizes, deck constructions....

{{productDetail[38264]}}

Designed to make working conditions easy. Dock leveller allows easier and faster loading and unloading from any...

{{productDetail[88542]}}

Aluminium Dock Plates:

Bridging the gap:

Aluminum Dock Plates are a great low-cost solution to bridging...

{{productDetail[62414]}}

Breathe New Life into Your Old Dock Leveling System with State-of-the-Art Air Technology

The patented ATC Air Technology Conversion Kit will extend the life of your old dock leveler and make it more efficient, while lowering your operating costs. The ATC Kit converts levelers of most major manufacturers and...

Easy-to-operate, fully hydraulic activation is now available in a conversion kit! Say goodbye to low productivity caused by operating mechanical levelers.

HTC...

{{productDetail[23412]}}

The Poweramp 232M is an electro hydraulic Dock Leveller with a hinged...

The Poweramp 233M is an electro hydraulic Dock Leveller...

{{productDetail[30989]}}

Pentalift HD Series Hydraulic Dock Levelers are designed to provide superior product value through prolonged,...

Description

The HU series hydraulic dock leveler is designed and built to provide prolonged, trouble free performance in heavy duty, high use applications....

The HC series hydraulic dock leveler is designed and built to provide...

The HD series high capacity hydraulic dock levelers are designed and built to provide superior product value through prolonged, trouble-free...

The MD series mechanical dock leveler is designed and built to provide superior...

{{productDetail[27114]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation