|
|
|
|
|
|
The Autoprime range of AC, L, PM and PE general purpose pumps offer the advantage of the lower cost package but with the opportunity to pick and choose the level of technology that is required.
The AC (Air Cooled) L (Long Coupled) ranges are the traditional range that has been in use for many years in many applications. The range offers a slightly higher head capability than the PM/PE range. Pumps sizes from 2" (50mm) to 8" (200mm).
The PM series range brings in more efficient pump ends with a higher flow capability than the L Series and elongated solids handling capability. Fitted with a mechanical priming system identical to the L Series but with the added benefit of the low emission coalescer and higher capacity vacuum pump used on the Q-Series range.
The PE series takes the technology a stage further in addition to those benefits experienced with the PM range there is the added bonus of the electric priming system that senses when the pump is primed saving on fuel costs and wear & tear. The PE priming system is identical to that used on SPP's award winning Q-Series.
|
|
Serie SMD
Self priming mag drive pumps with dry running capability
Gas-liquid separation system
These pumps are capable to self-prime the liquid up to 4 m within 3 minutes. The gas-liquid separation system ensures the repeating self-priming operation without check valve.
Pin-point contact system (Pat.)
This pin-point contact system is already proved in the MDH series and gives the pump a better resistance against dry runnung and cavitation. Besides the pumps are more reliable in comparison with conventional self-priming pumps.
|
|
|
Vanton heavy duty self-priming thermoplastic pumps are ideal for use on mobile acid buggies, for sump and tank evacuation and emergency overload pumping. They are often specified for in-line service where low headroom precludes the use of vertical pumps, and in other applications where rapid self-priming from depths to 15 feet is required. Available in PP & PVDF homogeneous thermoplastics, they are recommended for the handling of corrosive, abrasive, hazardous, toxic and other aggressive fluids.
|
|
Goulds Trash Hog® is designed for superior solids handling capability, optimum pump performance and extreme ease of maintenance for a wide range of industrial, pulp and paper, mining and municipal wastewater services. Whether handling raw sewage, sludge, debris or plant wastes, there's no other pump that compares to the Trash Hog®.
Large Capacity Priming Chamber For reliable priming and repriming
Heavy Duty Power End For extended life in toughest services
Non-Clog Impeller Capable of passing spherical solids to 3 inches (76 mm)
External Impeller Adjustment Easily renews optimum hydraulic performance
Trimmable Impeller Permits most efficient use of motor horsepower
Capacities to 6000 GPM (1363 m3/h)
Heads to 140 feet (43 m)
Temperatures to 225° F (107° C)
Pressures to 85 PSIG (586 kPa)
Suction Lifts to 25 feet (7.6 m)
Spherical Solids to 3 inches (76 mm)
|
|
This extensive range of side-channel pumps are available in various designs including:- Horizontal or vertical, self-priming and some of a segmental construction.
The pumps are able to handle entrained gases and liquids which in some cases contain solid or abrasive matter.
PERFORMANCE
- capacity up to 35 m3/h.
- delivery head up to 354 m
FEATURES & BENEFITS
- self –priming.
- gas handling.
- performance curve characteristics.
- pumping liquids under critical physical
- high wear-resitant materials
- high efficiency
- low NPSHR value
- modular hydraulic system
|
|
Pumped Liquid
Acids, bases, carbohydrates, processing water
Main Fields Of Application
For heavy-duty service in the chemical industry and process engineering, systems and apparatus engineering; according to standards DIN EN 734
|
|
|
Stainless steel (316) centrifugal pumps are designed to provide years of reliable service. A wide variety of port sizes, impeller diameters and seal options make AC Series horizontal centrifugal pumps extremely versatile.
|
|
|
|
|
|
The 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths because it is hydraulically formed rather than stamped. It is applied in general industrial services in which low to moderate flows are required with low to moderate heads.
* Applications:
Pharmaceuticals,OEM,Scrubbers,Ultrapure Water,Car Wash,Beverage Processing,Washing Systems,Cooling Water,General Purpose,Water Supply,Water Treatment,HVAC,Industrial Plant Services,Irrigation,Jockey Pump Services,Pressure Boosting
* Industries:
Automotive and Aircraft,OEM,Wastewater Collection and Treatment,Water Treatment
* Standards:
* Misc:
Hydraulically Formed rather than stamped, the 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths.
Close Coupled design saves space and simplifies maintenance and installation.
Stainless Steel Liquid End Components offer high quality and corrosion resistance.
Special Mechanical Shaft Seals and O-rings are available for high
|
|
The 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths because it is hydraulically formed rather than stamped. It is applied in general industrial services in which low to moderate flows are required with low to moderate heads.
* Flows to 85 m3/h (380 gpm)
* Heads to 85 m (280 ft)
|
|
|
With high delivery rates and heads, FLUX centrifugal immersion pumps combine maximum efficiency with a robust and reliable construction, resulting in a pump that provides the ultimate in process security, especially for transferring corrosive or abrasive fluids. Main fields of application are the chemical industry, chemical engineering, electroplating, PCB manufacturing, fresh and waste water treatment.
|
|
Goulds Model 3910 API 610 (OH3) vertical in-line pump provides benefits of low installation costs and space savings...without compromising reliability, maintainability, safety or hydraulic performance.
Back Pull-out for ease of maintenance.
Bearing Frame carries pump loads.
FramehookTM allows safe and easy removal of back pull-out assembly (patented).
Standard Spacer Couplings used for all applications.
In-Line Design for space and cost savings.
Motor Support Rugged fabricated steel, maintains positive shaft alignment. Available motor support. Unique frame-mounted motor support improves maintenance access.
Capacities to 7500 GPM (1700 m3/h)
Heads to 750 feet (229 m)
Temperatures to 650° F (343° C)
Pressures from full vacuum to 595 PSIG (41 bar)
|
|
Everything at Lutz revolves around safety and environment protection. Our centrifugal pumps guarantee the safe transfer of aggressive, corrosive and other hazardous acids and bases.
Lutz centrifugal pumps B50, B6 and B80 are particulary suited for the electroplating industry, waste water treatment, chemical industry, water conditioning and gas scrubbers.
The different sizes, types and material combinations of the vertical submerged pumps provide the range needed to cover all applications.
- Delivery rate up to 160 m³/h
- Delivery head up to 65 m
- Immersion depths up to 3000 mm
- Mousing materials: PP, PVDF, PVC or Stainless Steel
|
|
TCH. TCT, TCA pump series are available for vertical installation with lateral discharge flange.
The main design features are:
Lengths are from approximately 500 mm to 3000 mm with or without intermediate support sleeve.
Available materials of constructions are same as for the horizontal mounted pumps.
Depending upon the applications the sleeve bearings can be carbon, bronze or impregnated
Teflon materials.
Pump casing, impeller and casing cover are the same as for the series TCH, TCT, TCA.
The standard rectangular base can be modified to accommodate specific requirements.
Standard shaft sealing is by radial seal rings. Packed stuffing box or mechanical seal shaft sealing are available upon request.
Lantern for monoblock design is available for B5 or V1 motors up to 110 kW.
Internal sleeve bearing flushing is standard but provision for flushing from an outside source is provided.
Filter screen can be fitted at suction side upon request.
|
|
Applications:
Surface treatment
Transfer of chemicals
Agitation of chemical tanks
Cosmetics industry
Salt water
Metallurgy
Vertical design: Assembly immersed in bath
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser:
Very good efficiency
Max. flow rate up to 23 m3/h
Max. pump-out height up to 19 m
Impeller driven by a back-balanced, bearing-less drive shaft (T50/200 and T72/202) No gaskets ; no risk of leaks
No wearing parts
Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201): No gaskets ; no risk of leaks; Drive shaft height up to 756 mm
Version with counter-impeller (T72/242) Operation possible outside bath
|
|
Pumped Liquid
Lube oils
Main Fields Of Application
Main lube oil pumps for diesel engines in shipbuilding and stationary power stations
|
|
ALG series single stage single suction pipeline centrifugal pump are designed by scientific and technical personnel of our company and domestic water pump experts, which select the domestic excellent hydraulic model, adopt the performance parameter of the centrifugal pump of Model IS. Besides, according to different using temperature and medium, we develop pumps applicable for hot water, high temperature the corrosive environment, oil transporting on the basis of Model ALG
- Suitable for industry and city's giving and draining off water
- It is convenient to form a complete set with other apparatus
- High efficiency, low noise
- There are cold water types, hot water type, high temperature type, chemical industry type, oil type
- Performance is reliable
- International standard
|
|
Vertical Multistage Electric Pumps
SV Series SV 2, SV 4, SV 8, SV 16
Market sectors
civil, agricultural, light industry, water treatment, heating and air conditioning
Market sectors
- Handling of water,free of suspended solids,in the civil, industrial and agricultural sectors
- Pressure boosting and water supply systems
- Irrigation systems
- Wash systems
- Water treatment plants
- Handling of moderately aggressive liquids, demineralized water,water and glycol,etc.
- Circulation of hot and cold water for heating,cooling and conditioning systems
- Boiler feed
Materials
- Suitable for handling potable water (WRAS certified)
|
|
* Bearing-free, sealless design for leakproof, trouble-free operation.
* Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids.
* Stainless steel exterior hardware.
* Handles temperatures to 210°F (99 C).
* Corrosion resistant, fan cooled motors.
* Twin impeller design for high volume circulation and leakproof operation.
* High strength molded pump body for vibration free operation annd extended pump life.
* Portable for easy transfer between working areas.
* Easy maintenance.
* Convenient mounting panel for easy mounting to tank.
* Ideal for OEM applications.
* Made in U.S.A.
|
|
Type: single-stage, single-flow, open impeller
Head: up to 35 m
Flow rate: up to 800 m³/h
Pressure: up to 10 bar
Temperature: up to 60°C
|
|
SPP Pumps have been manufacturing fire pumps for over 130 years with one of the widest range of approvals of any manufacturer in the world. Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SPP UL Vertical In-line range of fire pumps approved for fire protection by Underwriters Laboratories and fully compliant with NFPA 20.
The SPP line of vertical in-line fire pumps are lightweight and compact for smaller pump rooms. They eliminate the need for coupling alignment and there are fewer lost or misplaced parts.
|
|
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).
SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter
|
|
Vertical Industrial
Turbine Pump
Flows to 70000 GPM (4760 m3/Hr)
Heads to 3,500 feet (1,060m)
Pressures to 2500 psi (75kg/cm2)
Bowl sizes from (6" to 55")
Temperatures to 500° F (260° C)
Horsepower to 5000 HP (1860 KW)
Design Advantages
Fabricated discharge head and flanged column.
Flanged bowl construction.
416SS shafting.
Alloy construction with external flush of critical wear areas available for corrosive/abrasive services.
Built-in alignment and simple piping for less costly installation and ease of maintenance/ reduced downtime.
Services
Cooling Water
Seawater and River Water Intake
Industrial Process Pumps
Utility Circulating Water
Condenser Circulating Water Pumps
Ash Sluice
|
|
Features
* High efficiency impellers and bowls
* Vibration-free performance
* Low submergence
* No priming required
* Dry pit/Wet pit arrangement available
* Direct drive/Right angle gear drive
* Impeller pull-out/Non-pull-out
* Bowl pull-out/Non-pull-out
* Gland packed / Mechanical seal
* 50Hz / 60Hz availability
Applications
* Water supply
* Irrigation
* Cooling tower
* Thermal and Nuclear power plants
* Steel, Cement industries
* Refineries
* Sea water on off-shore platforms
* Condensate extraction
* Fire fighting
* Flood control
* Dry Docks
Range
* Delivery size up to 2200 mm
* Capacity up to 40,000 m³ /hr
* Head up to 200 metres
|
|
|
|
|
|
Griswold Vertical Turbine Pumps are available with two types of pump drives . . . vertical hollowshaft electric motor drive or right angle gear drive. Our turbine pumps offer you a choice of two types of lubrication . . . either a water lubricated line shaft or an oil lubricated line shaft construction.
To fit various applications, Griswold discharge heads are available either cast for above ground discharge or fabricated for various discharge configurations. Depending on pumping requirements, our pump bowls are available in 6”, 8”, 10”, 12” and 14” diameter.
Impellers available in the various bowl assemblies are of different designs and sizes. All impellers are precision designed, engineered and finished to give highest efficiency. Our impellers are made of high-strength bronze, machine, hand finished and dynamically balanced for top performance and long life.
We manufacture a large variety of impeller and bowl designs. This makes it possible for us to fit most any job from 60 to 3500 gallons per minute . . . low or high head . . . open or pressure discharge.
|
|
|
|
|
|
SPP's Lowest Life-cycle Cost Series of single and multi-stage Vertical Turbine pumps have been designed for longevity and incorporate many standard features, which facilitate ease of maintenance. A spacer coupling between the thrust bearing assembly and seal chamber allows a cartridge mechanical seal to be removed without dismantling the headpiece and removing the driver. Easily removable keyed muff type couplings connect all shafts, facilitating disassembly of the whole pump unit with minimal risk of damaging expensive component parts.
High-grade standard materials of construction and a rugged stiff shaft mechanical design coupled to state of the art hydraulics, offer unrivalled longevity and the lowest cost of ownership.
TYPICAL APPLICATIONS:
Water Treatment & Supply
River Water Extraction
Borehole Deep Well Extraction
Drainage & Irrigation
Cooling Tower Circulation
Process & Industrial utility duties
Petrochemical utility duties
Condensate Extraction
Sea Water lift
Power Plant utility duties
|
|
Features
* Oil lubricated bearings
* No water contact with shaft, hence no corrosion
* Volute casing - Reinforced Concrete
* Shaft, Impeller and other components of special material available
Applications
* Circulating Water/Condenser
* Cooling Water for Power Plants
* Dry Docks
* Drainage and Flood Control/ Storm Water
* Lift Irrigation and Water Supply
Range
* Delivery size up to 4000 mm
* Capacity up to 1,20,000 m3 /hr
* Head up to 50 metres
* Motor rating up to 4500 Kw
|
|
Type: single-stage, single-flow, semi-open channel impeller
Consistency: up to 4%
Head: up to 75 m
Flow rate: up to 1,000 m³/h
Pressure: up to 16 bar
Temperature: up to 120°C
|
|
|
All Vanton CHEM-GARD pumps are available with recessed, dynamically balanced impellers, custom sized and trimmed to suit the shapes, dimensions and physical properties of included solids. CGV pumps are rated for flows to 900 gpm (205 m3/hr), at heads to 240 feet (73 m) with performance for individual applications dependent on the characteristics of the fluid handled. They can be furnished in the full line of thermoplastics and are designed for clog-free pumping of fluids with soft, hard or stringy materials - even with solids to 3 inches (75 mm) in diameter.
|
|
Micropump's centrifugal pumps offer a reliable, simple, long-lasting design for higher flow applications. Using the unique leak-free magnetic drive technology, centrifugal pumps provide excellent chemical resistance and energy efficient fluid delivery. Integrated impeller and magnet assemblies reduce the number of rotating parts to maximize pump life.
Performance Summary
- 27 L/min at 9000 rpm
- 14 meters maximum head
- 13.6 bar max. rated system pressure
- 122 degrees C max. temperature
- Pumps up to 100 cps fluids
|
|
XBD-W horizontal type single stage and single absorbs fire pump
|
|
|
|
