|
|
|
|
|
|
Application
These pumps are suitable for various purposes such as water supply system in industrial plants agriculture and sprinkler irrigation systems, Air conditioning plants, pumping fuel, edible oils and condensates.
Design
General
KSM low pressure, self regulating pumps consists mainly of four elements.Volute casing with stuffing box.
Impeller.
Suction Cover.
Bearing Pedestal.
Volute Casing
Casing consist of axial suction and radial discharge branch, which passes through the center line in vertical which ensures the balance of the liquid being pumped.
Stuffing Box
It is integrally cast with the volute casing and is readily accessible for the insertion of gland packing the pump can also be provided with mechanical seal.
Impeller
The impeller is of radial type with double curvaflire vanes, over hung type. The impeller is statically and dynamically balanced. with balancing holes.
Bearing Pedestal
There are basically two types of bearing pedestals which cover the ranges of pumps.Type I & Type 2. In all pedestal designs two robust deep groove ball bearing are provided for the shaft to take up radial and axial loads.
In case of heavy duties type 2 pedestal is used which has thicker shaft and larger outer diameters bearing.
|
|
Operating Limits:
-For clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
-Liquid temperature:
Normal temperature type:-15¡ÆC¡75¡ÆC
Hot water type:70¡ÆC¡120¡ÆC
-Max. ambient temperature:40¡ÆC
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
|
|
Speciality
FSB and FSB-D type centrifugal pump,overflow part is made of fluoroplastic alloy ,compact in structure and easy to operate with low price,pump casings,impellers and mechanical seals of the two types can be exchanged in qpplication, therefore,they are welcome in industries such as pesticide,electronics and paper manufacturing etc.
Introduction
FSB and FSB-D type centrifugal pump,overflow part is made of fluoroplastic alloy,compact in structure and easy to operate with low price pump casings,impellers and mechanical seals of the two types can be exchanged in application,therefore they are welcome in industries such as pesticide,electronics and paper manufacturing etc,
|
|
General
The selfpriming multistage DICKOW-centrifugal pump is designed for handling hydrocarbons and other volatile liquids.
The HZS-type is used in tank farms, for offloading of rail cars and trucks, filling of storage tanks, feeding hydrant systems on air fields and for other applications where priming of empty suction pipes is required.
The HZSA-type with low NPSH-requirements and gas handling capability is developed for pumping liquified petroleum gas (LPG). Typical application is the filling of LPG-trucks in refineries.
The performance range is subdivided to achieve best efficiencies for all service conditions.
With a wide selection of materials and the possibility of applying several shaft sealing systems as well as a hermetically sealed permanent magnetic coupling, the HZS / HZSA-pumps are suitable for handling almost all kinds of liquids which are free of abrasive solids and of suitable viscosity.
|
|
|
ourzx series self-priming pump is a kind of energy-saving pump developed by us after studying relevant technical data both at home and abroad and also making improvement,this is a kind of self-priming centrifugal pump,featured by a compacted structure, easy and stable operation, easymaintemance,high efficiency long life, strong self-priming capacity.etc. the foot valve is unnecessary for the pipeline just make sure there is quantitative conduction liquid in the pump body before the operation. Therefore, it simplifies the pipeline system and improves the working condition.
|
|
Features:
WIDE RANGE OF APPLICATIONS:
- Liquids Entrained with Solids
- General Industrial, Pulp & Paper, Mining, Meat Packing
- Raw Sewage, Sludge
- Slurries
- Trash
- Wastewater
CAPABILITIES:
- Capacities to 1300 GPM
- Heads to 112 Feet TDH
- Sizes: 3", 4" and 6"
- Solids Handling: Up to 3" Diameter Sphere
- Suction Lifts to 25 Feet
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel Fitted
- All 316 Stainless Steel
- CD4MCu Fitted
- All CD4MCu
|
|
Operating Limits:
-Max.suction head:9m
-Max.liquid temperature:60°C
-Max.environment temperature:40°C
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP44
Material:
-Pump body: Stainless Steel
-Impeller: Brass/Noryl/Stainless Steel
-Motor Shaft: Hi-Cr plated 45# Steel/2Cr13# Stainless Steel/S.S#304 Welding shaft
-Mechanical seal: Ceramic/Graphite
Application:
·Stainless steel pump body self-priming pumps suitable for gardening, water supply, washing, increase water pressure, etc. It is usually can be combined with a pressure switch and a surge tank to be used as a Domestic Water System for distributing water.
|
|
Operating Limits:
-Max.working pressure : 10 bar
-Fluid temperature up to 35°C
-Maximum ambient temperature 40°C
-Total suction lift up to 8 mt.
Motor:
-Insulation Class B
-Protection IP54
Materials:
-Pump body: Stainless Steel
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
-Pressure tank: 19L or 24L
Application:
Automatic high pressure groups coupled with selfpriming jet inox pumps.
They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.
|
|
Operating Limits:
-Max.working pressure : 10 bar
-Fluid temperature up to 35°C
-Maximum ambient temperature 40°C
-Total suction lift up to 8 mt.
Motor:
-Insulation Class B
-Protection IP44
Materials:
-Pump body: Stainless Steel
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
Application:
Automatic high pressure groups coupled with selfpriming jet pumps.
They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.
|
|
Operating Limits:
-Max. fluid temperature from +5°C~60°C
-Max. ambient temperature up to 50°C
-Max. working pressure: 2.5Bar
Material:
-Pump body and diffuser in glass loaded Polypropilen
-Impeller in glass loaded Noryl
-Motor shaft in AISI 1045
-Mechanical seal in graphite and ceramic
-Motor housing and pump support in aluminium L-2521
-Windings impregnated with epoxy resin
Motor:
-2-pole induction motor
-Built-in thermal protection
-Insulation class B
-Protection IPX5
-Continuous duty
Application:
·This self-priming electric pump is designed for clean or slightly dirty water with suspended solids. It is suitable for swimming pool filtration system, etc.
|
|
|
|
|
|
General
Magnetic coupled DICKOW-Pumps of series HZSM / HZSMA are of sealles design. the containment shell forms a closed system with hermetically sealed liquid end. The properties of the integrated side channel stage allows the handling of entrained gas and operation under suction lift conditions.
Applications
Magnetic driven HZSM / HZSMA-pumps are designed to improve plant and personnel safety, especially when handling toxic, expolsive or other dangerous liquids which react on contact with the atmosphere. For all these sevices the containment shell replaces double acting mechanical seals with external fluid reservoirs and the necessary control equipment. HZSM / HZSMA-pumps therefore offer exceptional benefits to the chemical, petrochemical and allied industries and fulfill all environment protection rules.
Due to the fact that 90% of pump failures are caused by leaking shaft seals, the sealless design increases the availability and reduces maintenance costs.
The HZSM-type is used in tank farms, for offloading rail cars and trucks, filling of storage tanks and other applications where priming of empty suction pipes is required.
Considering low NPSH-values, gas handling capability and sealless design, the HZSMA-type offers special benefits to liquified gas applications. Typical application is filling of LPG-trucks and rail cars in refineries.
|
|
Operating Limits:
-Liquid temperature:
-Normal temperature type:-15°C?+70°C
-Hot water type: +70 °C?+100°C
-Max. ambient temperature:+40°C
-Max. operation pressure:10 bar
-Max. inlet pressure is limited by max. operation pressure
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
Material:
-Pump body: Cast Iron
-Impeller: Stainless Steel
-Motor Shaft: Stainless Steel
-Mechanical seal:NBR/Ceramic/Carbon
Application:
·Mainly used in industrial field:
·Air-conditioning system
·Cooling system
·Industrial cleaning
·Water treatment(Water purification)
·Aquiculture
·Fertilizing/metering system
·Environmental application
·Other special applications
|
|
THE VSMP PUMPS
The Vertical Sealless Motor Pumps series of sealless single or multistage centrifugal pumps is mainly for use with combustion gases like methane, high suction pressure gases like Carbon dioxyde, expensive gases like Argon, where all risks of gas leakage of the process gas contamination are eliminated.
The main feature of these pumps are:
Maximum level of safety with LNG (gas tight)
Flowrate up to 2'500 L/min
Single or multistage: differential head up to 1'000 m
Available for all cryogenic gases including LNG, except Oxygen for safety reasons
|
|
|
Under the SP fluid the dregs thick liquid pumps forthe verticalcentrifugal dregs thick liquid pumps, plunges underthe fluid, uses into transport the abradability, the thick pellet, the highlyconcentrated dregs thick liquid. Does not need any axis to seal withthe axis seals the water, is insufficient in the absorption quantityunderthe operating mode also can the normal work. SP pumps has flowed the part to be made by the wear-resisting metal. SPR pumps plunges underthe fluid the spare part to bring the rubberouter lining, is suitable to transporting the non- edges and cornersthe abradability dregs thick liquid. According to the dregs thick liquid pond liquid level height, maychoose the different length the pump driving shaft orthe inductionpipe. Uses the many kinds of speeds and the many kinds of aberrations way.causesto pump underthe best operating mode moves, service life long.the movement benefit is high, can satisfy many kind ofbadtransportations condition.
|
|
Features :
WIDE RANGE OF
APPLICATIONS:
- Industrial Process
- Corrosive Liquids
- Paint
- Waste Water
- Chemical Slurries
CAPABILITIES:
- Capacities to 3000 GPM
- Heads to 230 Feet
- Temperature to 400 d. F
- Pump Length to 6 feet
- Shaft Diameter to 5"
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel
- Alloy 20
- Hastelloy
- CD4MCu
|
|
Application
These pumps are used for water supply, irrigation, dewatering. Turbine pumps are particularly suitable for narrow bore holes. Minimum bore hole sizes range from 200mm to 400mm.
|
|
Features :
WIDE RANGE OF APPLICATIONS:
- Food Processing Solids
- Waste Water Treatment
- Pollution Control
- Slurries
- Industrial Process
- Solids
CAPABILITIES:
- Capacities to 1600 GPM
- Heads to 170 Feet TDH
- Temperature to 250 d. F
- Back Pull-Out Construction
- Fully Recessed Vortex Impeller
- External Impeller Adjustment
- Packing or Mechanical Seal
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel Fitted
- All 316 Stainless Steel
- Alloy 20
- CD4MCu
|
|
Operating Limits:
-Max.suction head:9m
-Max.liquid temperature:60°C
-Max.ambient temperature:40°C
-Continuous duty
Motor :
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP44
Material :
-Pump body: Cast Iron
-Motor Bracket:Aluminium(or with brass insert)
-Impeller: Brass
-Motor Shaft: Hi-Cr plated 45# Steel/2Cr13# Stainless Steel/S.S#304 Welding shaft
-Mechanical seal: Ceramic/Graphite
Application:
·They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made.
·For their reliability, simplicity of use and economy they are suitable for domestic use and in particular for distributing water in combination with small pressure sets, for irrigating gardens.
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
Series 410 - Horizontal Single Stage Split Case Pumps
The horizontal split case pump has long and properly been used for the handling of liquids where the utmost in reliability and accessibility are paramount. Billions of gallons of liquid have been pumped by split case double suction pumps and billions more will be pumped condsidering the rapid industrial, agricultural and commercial expansion. The Aurora 410 Series pumps make a significant contribution to the customer requirements for pumps on this type of service.
Feaures:
- Capacities to 15000 G.P.M (3407 M3/HR)
- Heads to 500 feet (152 Meters)
- Temperatures to 275°F (135°C)
Applications:
- Cooling, Heating and Air Conditioning Service
- Boiler Feed Service
- Condensate Service
- High Pressure Water Service
|
|
Single stage, double suction pumps designed for a wide range of industrial, municipal, and marine services.
Models 3408 & 3410 - Small capacity (Flows to 8,000 GPM / 1,817 m3/hr)
Model 3409 - Medium capacity (Flows to 12,000 GPM / 2,725 m3/hr)
Model 3420 - Large capacity (Flows to 65,000 GPM /14,762 m3/hr)
Model 3498 - Extra Large capacity (Flows to 225,000 GPM / 51,098 m3/hr)
|
|
Size: ¥õ200 ~ ¥õ1,800 mm
Capacity: 100 ~ 28,000m3/h
Major Applications
- Water Intake Pump, Circulating Pump
- District Heating Pump
- Feed Water Booster Pump
- General Industries
|
|
Goulds Model 3620 API 610 (BB2) between bearings radially split double suction process pumps are designed for smooth, reliable operation.
Goulds has extended the hydraulic coverage on its Model 3620 process pumps. These new hydraulics augment existing hydraulics, extending the Model 3620 hydraulic coverage. The new performance curves can be accessed through the Pump Selection System (PSS).
Specifications:
Capacities to 20,000 GPM (4540 m3/h)
Heads to 1500 feet (455m)
Temperatures to 850° F (455° C)
Pressures from full vacuum to 1000 PSIG (6895 kPa)
|
|
Characteristics
¡Single horizontal centrifugal pump.
¡Horizontally split casing, double volute (HSC pumps and some HSR's) minimizes thrust loads and allow operation over a wide range of capacities.
¡Flanged connections.
¡Enclosed impellers, double suction provides hydraulic balance eliminating axial thrust.
¡Clockwise or counter clockwise rotation.
Design Features
¡Oil lubricated bearings for HSC & HSR.
¡Stuffing box allows for mechanical seal.
Standard Construction Materials
¡Cast Iron.
¡Cast Iron, Stainless Steel Fitted.
¡All Bronze.
¡All WCB grade Carbon Steel.
¡All Stainless Steel.
Operation Limits
¡Capacity to 14318 m3/hr (63000 U.S. gpm).
¡Head to 340 m (1115 ft).
¡Pressure to 28 kg/cm2 (400 psi).
¡Temperature 10%u2039C to 150%u2039C (50%u2039F to 300%u2039F).
Applications
¡Fire Service.
¡Cooling Towers.
¡Municipal.
¡Oil Process.
¡Petrochemical.
¡Sugar Industry.
¡Paper Industry.
¡Pipeline.
¡Power Plants.
¡Others.
Ruhrpumpen Nomenclature
¡HSC
¡HSD
¡HSR
¡ZM
|
|
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability.
Ample balancing line from 2nd. stage to suction maintain stuffing box pressures within limits easily acceptable by any type of balanced mechanical seals.
New centerline casing mounting for high temperature stability.
Rotor operates away it’s critical speeds.
Deep stuffing boxes designed in accordance to API 682 Std., suitable to accept any type of mechanical or packing seals.
Axial split bearing housing for easy inspection and maintenance procedure.
Labyrinths and deflectors at either bearing housing to maximise protection against dirt.
A wide range of sizes and material combinations complete the variety of the offered product.
|
|
|
Horizontal plastic Centrifugal self-priming Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
|
|
ETN-SP SERIES
TECHNICAL SPECIFICATIONS
Materials PP/PCV-CAW
Flow rate 25 mc/h
Head 30 m
Temperature range 0 °C - 50 °C
Allowable pressure rating PN 6 (20°C)
Impeller type Chiusa
Motors 0.75 - 7,5 Kw
Max suction lift - 6 m
Pass solids not allowed
Inlet outlet UNI PN 16 RF
|
|
Features
* Gland packed / Mechanical seal
* 50HZ / 60 HZ availability
Applications
* Water supply
* Air-conditioning
* Power plants
* Mine drainage
* Irrigation
* Fire fighting
Range
* Delivery size up to 150 mm
* Capacity up to 470 m³ /hr
* Head up to 180 metres
* Temperature (-) 10 degree C to 90 degree C
|
|
Fields of application:
Conveyance of stock suspensions with a consistency of up to 2% in the pulp and paper industry:
• Headbox pumps
• Cleaner pumps to headbox
• White water pumps
• Water distribution
The facts
• Capacities up to 20,000 m3/h
• Up to 110 m delivery head
• Drive power up to 7,000 KW
• Range: 0.7-1.2 Qopt
|
|
|
|
