|
|
Laser precision drilling in XXL
The LASERTEC 130 PowerDrill sets innovative standards for drilling of large turbine components. Large, annular components for combustion chambers and after-burners, or even turbine vanes for industrial gas turbines can be machined fast and efficiently. The two highly dynamic torque motors in the component rotary axis and in the laser head ensure short machining times with precision. Trepanning is possible with high cutting speeds due to the excellent machine dynamics. A new programming system for combustion chambers and similar components delivers fast and easy generation of complex machining programs. A new collision prevention system offers maximum protection during the setup of programs with the regidity required for a high speed manufacturing process.
|
|
HYDRAULIC PUNCHING MACHINE PK 30 COMPLETE WITH PROGRAMMABLE MOTORIZED LENGTH STOPS.
Working with programmable continuous cycle or single cycle as preferred. Adjustable stroke and lockings on “Brushless” motors of the reference squares. Punch pause time adjustment on continuous cycle.
Once the machine has been programmed and set in automatic mode, the operator keeps the sheet of metal resting against the two motor-operated length stops and gives the start command using the pedal or push-button. The machine then punches automatically, moving the length stops until the end of the punching cycle is reached. The machine has a semiautomatic cycle and a manual cycle, in which the axes are moved be pressing the buttons.
|
|
General overview:
The objective of this machine was to develop a flexible standard cell that applied the productivity of multiple spindle tapping to more than one style part and could also adapt to tap additional parts at a later date. The parts are steel, automotive stampings required in fluctuating, on-demand high volumes. Three completely different style stampings are tapped in the cell. Based on the demand for any particular part, the machine is changed over by exchanging work holding fixtures and cutting tools within the multiple spindle pattern. CNC rigid tap cycles are automatically set to tap the required thread pitch of a particular part thru a fixture identification system. Changeover time is one minute for re-setting the machine to process one of the 3 different parts.
|
|
These small-sized, medium-sized and large-sized hand drills are suitable for downward drilling, in particular.
Widely used for breaking rocks in quarries or for road constructions and other civil engineering work.
|
|
HD Multispindle high speed drilling unit for structural sections processing
HD range: HD 600, HD 615, HD 900, HD 915 HD 1200, HD 1215
Drilling-sawing lines, key of a structural steel workshop
HD is a numerically controlled drilling unit, with a rigid framework, designed for fast working of all types of profiles, flat bars, angle sections, rectangular tubes, etc. up to 1200 x 600 mm.
Machine design (drilling spindles in frame centerline with guides eliminating all deflection during machining) makes a perfectly stable and exceptionally long lasting machine.
This stability suppresses any vibration that may appear on a traditional drilling machine. Moreover, combined with high drilling power and speed, it enables the use of almost any type of drilling, like carbide insert drills for higher productivity.
The HD may be combined with a sawing process (BEHRINGER band sawing machine), in line or in parallel, with infeed and exit loading systems or lifts.
|
|
M 320 / M 500 / M 630:
Modular construction system consisting of deep hole drilling units and machine beds for diameters up to max. 260 mm and drilling depths up to 2000 mm.
|
|
he PICOMAX® 54 is the optimum substitute for a tool milling machine.
It modernises conventional machinery by the use of practice-oriented CNC control.
PICOMAX® 54 Top-flexibility
The compact milling and drilling machine combines manual operation and automatic operation controlled by CNC. It's posible to work with this machine conventionally as well as two axis CNC.
|
|
Winbros’ Delta Laser machine has been designed to accommodate large components up to 1.9m in diameter, 500mm in height and up to 500Kg in weight. The Delta system can be configured to allow fitting of the most suitable Laser for the application, the four laser types generally used are Pulsed High Peak Power Nd:YAG, predominantly for drilling, Continuous Wave CO2 or Fibre Laser for cutting, cladding and welding and High frequency Diode Pumped Nd:YAG for ablation.
* Drilling of combustors, and large components
* Heidenhain control system and PC process controller
* Breakthrough detection system
* Contact probing
* Laser scanning / mapping
* Capacitive height sensing
* Quick change nozzle system
* Crash protection system
* Advanced programming interface (LFE)
* 3D Cutting of various components
* Percussion drilling
* Trepanning
* Drilling on the fly
|
|
The Drill Matic is a complete line of machines used for the drilling operations on paper rolls. With the Safop's drilling machine it is possible to perform multiple drilling operations and thus reduce the machining time. According to the required technology it is possible to perform multiple drills on stainless steel, steel or bronze rolls. When required only the drilling of rubber or polyurethane covers is perform.
These operations may require the use of Coolant system. These machines are equipped with a bed supporting the work piece and a separate bed for the carriage unit.
The headstock unit is an indexing unit which allows the angular indexing of the roll in order to obtain high accurate Drilling schemas. It is equipped with a positioning brake. The roll is supported between Steady rests and the drive of the rolls is guaranteed thanks to special Cardan joints.
|
|
DD4060 - Semi Automatic Water Slot Machine With Two Drills
* For drilling the water drain slots on the PVC profiles.
* Operational safety cover.
* The selection of motor is done by the selector switches.
* Number of motors: 2.
* Profile tightening operation controlled with hand command valve mounted on the body.
* Available pneumatic tightening system.
* The milling heads can be freely adjusted by angle, depth and height.
* Opens water slots on two sides at once -by using a single button.
* With adjustable feet- the machine is easy to setup on the floor.
* Operation time: 10 seconds.
|
|
·Most suitable for drilling downward and inclined blas-tholes in medium nard and hard rock with a hardness of f=8~18:
·An ideal tool for rock drilling operations in small open-pit quarries, mines, water conservancy projects and road building in hilly areas, etc, and for secondary blasting in large mines.
·The incorporation of FY200B Line Oiler with transparent casing provides automatic lubrication during operation during operation.
|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
| ... products without technical information |
| |
|
|
