|
|
The flowdrill process is based on a combination
of thrust force and rotation speed. It allows to form
bushing into thin walled metallic materials.
All metals which can be soldered, ferrous or non
ferrous, can also be flowdrilled. Parts with a protecting
coat like chromium platimg, etc., are non suitable for
the flowdrilling.
In order to precisely control the process (thrust and
speed) it is recommended to work with the machining
unit BEA25CNC, for less demanding applications the
unit BEM20. For thread cutting or forming the tapping
unit GEM20.
|
|
The flowdrill process is based on a combination of thrust force and rotation speed. It allows to form bushing into thin walled metallic materials. All metals which can be soldered, ferrous or non ferrous, can also be flowdrilled. Parts with a protecting coat like chromium platimg, etc., are non suitable for the flowdrilling.
In order to precisely control the process (thrust and speed) it is recommended to work with the machining unit MAX20CN, for less demanding applications the unit MAX20F. For thread cutting or forming the tapping unit MAX20T.
|
|
Centerdrills
Countersinks
Combined Drill & Countersink
Counter Bores
Hey Drills
Spotting Drills
Chamfer Drills
It provides a wide array of center drills and custom cutting tools.
|
|
in High Speed Steel and Carbide
Twist drills
Ratio drills
Micro-precision drills
Oil feed drills
Subland drills
Centre drills
Core drills
Gun drills
Drilling systems with interchangeable inserts
|
|
Reamers Taper Pipe
- For use by hand with suitable wrench
- Suitable for tool rooms & workshop use
- Used prior to tapping tapered thread forms (BSPT, NPT)
- Prolongs tap life, especially in tough materials
|
|
|
|
|
|
Reamer 830 - for finishing of through holes
Sandvik Coromant now introduces a reaming tool programme as a complement to the high performance drill concept CoroDrill 880.
The new reamer is of modular design with replaceable cutting head, and easy to change while still in the machine tool spindle.
Designed for precision and easy handling
The cutting head is located in the holder by a precision made tapered coupling for highest concentricity and repeatability with a radial run-out better than 5µm.
Clamping and releasing of the cutting head is easily carried out by turning the clamping mechanism only a quarter of a turn using a hexagonal key. The tool is equipped with brazed cermet inserts in grade P10R covering reaming of carbon steel, low alloy steel and nodular cast iron.
Directed cutting fluid supply
for highest surface finish
The cutting fluid holes are located directly behind each cutting edge, flushing the chips forward avoiding recutting of chips and damage to the surface generated.
|
|
Reamers Hand
- For use by hand with suitable wrench
- Suitable for tool rooms & workshop use
- Produces clean, accurate holes, to a H7 plus tolerance
Reamers Machine
- Machine use
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 plus tolerance
|
|
Our comprehensive reamer range has been designed to not only meet requirements of dimensional accuracy and surface finish for precision hole machining, but also to deliver high productivity.
Including fixed, expandable and modular mandrel reamers, the range covers hole diameters from 5.8mm to 200.6mm and incorporate integral coolant ports in three configurations to provide optimum coolant flow for both through and blind holes.
All reamers in the range use brazed carbide cutting edges, incorporating various coatings to suit specific work piece materials and maintain optimum performance, accuracy and finish. Also, six different 'lead in' geometries can be specified, dependent on whether an integral expanding reamer or modular cutting ring type is required.
|
|
High-precision reaming tools and reamers
for finishing and fine internal machiningAs a brand of the KOMET GROUP® , DIHART® is convincing for its perfect reaming technology to new dimensions.
For the economic fine machining of bores, the comprehensive tool programme of standardised one-way heads, from Monomax® monoblock tools, PCD reamers and tailor-made multiblade stepped reamers and on to customer-specific special tools, guarantees accurate, economic and reliable machining.
Innovative solutions for fine bore machining:
Reamax® TS - Modular reaming system
Reaming with indexable insert technology
DIHART® compensating holder DAH for µ-accurate concentricity
|
|
|
|
|
|
Tools with "built-in know-how" reduce costs. This also applies to our powerful reamers, which quickly pay for themselves in daily use in the production department.
Standard reamer with parallel shank
Standard reamers with parallel shank and guide pads (solid carbide + cermet) for all common dimensions in H6 tolerance, for through-hole and blind-hole boring with a defined selection of cutting plate geometries for all common workpiece materials.
Special solutions:
Specially manufactured reaming tools with indexable inserts and guide pads are possible for a wide variety of machining processes, such as boring of camshaft and crankshaft bearings up to valve guide machining.
Depending on requirements the cutting tool material, geometries, pad materials, different step profiles and tool holders, such as compensating adapters, can be integrated into the tool concept to fulfil maximum roundness, cylindricity and quality requirements.
- Reamers with step profiles
Stepped reamers enable a high degree of accuracy with concentricity requirements in the tolerance range IT 5 - IT7
- Reamer with compensating adapter
In the event of critical tool projections or machine-related inaccuracies a tool must be equipped with a compensation adapter, as illustrated on the left, which is set radially and axially on the machine. Doing this will ensure an optimal production process.
|
|
Hand reamers / Machine reamers
- Left hand spiral
- Straight shank and square
- irregular division
|
|
PCD Reamers:
Are designed to run at maximum RPM and increased feed rates. We select from seven different grades of PCD to offer outstanding tool life and improved surface finish. All non-ferrous applications should be considered including aluminum cast, composites and glass filled plastics.
|
|
Designed to finish holes to H7 tolerance, Dormer manufacture a range of HSS and HSS-E reamers:
- Hand Reamers
- Adjustable Hand Reamers
- Hand Reamers Quickly Adjustable
- Hand Taper Reamers
- Hand Taper Pin Reamers
- Machine Reamers
- NC Reamers for High Precision Chucks
- NC Centesimal Reamers for High Precision Chucks
- Machine Centesimal Reamers
- Machine Reamers Left Hand Helix 45°
- Machine Reamers for Conical Pint Left Hand Helix 45°
- Bridge Reamers
- Shell Reamers
|
|
Reaming
Kennametal capabilities are not finished in just drilling a hole. When high quality holes are needed, the KM multi-cut high performance Reaming program is the solution. All of the Reamers will be ground after ordering specific to the application regarding diameter and cutting material. There are three different systems available: RMA (Reamer Monobloc Adjustable), RCH (Reamer Cutting Head) and RMS (Reamer Monobloc Solid Carbide)
RCH Reaming System
Flexible reaming system
RMA Reaming System
High performance reaming system.
RMS Reaming System
Unique cutting geometry and coating.
|
|
Landis Reamer Program
Landis Reamers for reaming, chamfering, and facing come in four basic styles - solid, detachable blade, insert blade and composite. The style supplied will depend upon the operation to be performed and the type of Landis die head in which it will be used. They can be identified by a symbol number stamped or etched on one of the flutes of the solid and composite reamers and on each one of the blades of detachable and insert blade-type reamers.
|
|
Bore sizes up to 8.00”
Up to .200” stock removal
Size control within .001”
Life capability to 100,00 bore
Whatever your requirement, every tool is engineered and manufactured specially for your application
|
|
DIXI Polytool has a complete range of standard indexable inserts "ARTDECO" for swiss turning applications as well as brazed turning tools.
|
|
Reamers
- High performance Reamers
Solid Carbide
Carbide-tipped
- Expansion Reamers
- Hand- and Machine Reamers
HSS / HSS-E
- Quick Adjustable Hand Reamers
- Shell Reamers
- Taper Bridge Reamers
- Taper Pin Reamers, taper 1:50
- High-Helix Taper Pin Reamers, taper 1:50
|
|
These high quality, easy-to-use, reamers are perfect for high performance machining and large batch production.
Optimised cutting grades and geometries offer high productivity in all types of materials. Diameter range 4-60 mm (inches: .1574-2.362).
Read more about our reaming products below:
BIFIX
Bifix is a high precision, indexable blade reamer suitable for all material groups.
PRECIFIX
Precifix is a high precision indexable blade reamer capable of IT6 tolerance. The diameter range covers 12-60 mm, and the unique clamping system design ensures stable blade clamping.
PRECIMASTER
Precimaster is a smart design, exchangeable head reamer. It's effective, accurate, modular and adjustment free.
|
|
MAPAL offers a very extensive programme for rough-boring applications: the MAPAL WWS boring tools featuring PCD inserts, the special MAPAL tools with ISO inserts and the newly developed adjusting system guarantee best boring results.
|
|
in High Speed Steel and Carbide
NC machine chucking reamers
Machine and machine chucking reamers
Taper pin reamers
Hand reamers
|
|
|
|
see the results for the following category : 
