|
|
|
|
|
|
Walter Titex UFL – always the first choice for drilling specialists
The special flute profile, the 40º helix angle and the form U point grind guarantee good chip clearance, considerable tool rigidity, excellent chip evacuation properties and a controlled chip breaking.
Unique AlCrN-based power coating
Perfect chip removal thanks to large chip clearance
Can be used universally
Attractive price/performance ratio
High process reliability
Varied application possibilities with regard to materials and application (e.g. MML).
Ensures free machine capacity
VA INOX – HSS-E-drill
Austenitic stainless steel is extremely difficult to machine due to its very high strain, great toughness, unfavourable chip formation and poor heat conduction. A completely new type of HSS-E drill has been developed as a reliable solution – the “VA INOX”.
TINAL FUTURA TOP coating for increased wear resistance, optimum chip transport and prevention of material pick-up.
Enormous increase in feed rates
Economical production of small and medium-sized batches as are often required for stainless steel components
Extremely high productivity
|
|
Walter provides its customers with yet another boost in productivity through the introduction of the two new drills from the Xtra-tec® series.
The Xtra-tec® Insert drill with two four-edged indexable inserts is ideal for full or spot drilling on inclined or spherical surfaces.
The Xtra-tec® Point drill is particularly convincing when producing short drill holes or through holes with additional chamfer.
Walter B4213
Increase in productivity from the higher work values
Low hole tolerance thanks to the optimum balance of forces
Excellent surface finish from the WIPER action at the hole diameter
Cost reductions:
– 4 cutting edges per insert
– higher cutting parameters – saving additional follow-up operations
High process reliability from positive
locking of the insert
|
|
The new solid carbide drill Walter Titex X·treme PLUS is an innovative masterpiece and it sets new standards. This high-tech tool has a unique multifunctional double coating for extremely high cutting speeds.
This enables huge increases in drilling productivity - with the best surface finishes.
X-treme
Walter Titex Xtreme
Maximum productivity; at least double that achievable using conventional tools = more productivity, lower production costs
ALTERNATIVE: double the tool life with conventional cutting data = e.g. fewer tool changes
High process reliability
Excellent surface quality
Varied application possibilities with regard to materials and application (e.g. MQL).
Ensures free machine capacity
|
|
Drills Centre
- Used to drill female 60º centre holes in the end of shafts and components, which will later revolve between centres
- Also used to ensure accurate starting and centering when precision drilling is required
|
|
|
|
|
|
Even centering can be „Cool“
The new tool is unique in two aspects, hence its name: CrazyDrill Twicenter.
Two integrated ducts supply the coolant directly to the exact spot where it is needed, right up to the drill’s cutting edge. The internal cooling is an advantage, always provided the machine used is equipped for it. No additional external cooling is needed. When drilling – and consequently when centering – in places difficult to access, bringing the coolant up to the cutting edge can be quite difficult. Only a precise internal coolant supply solves the problem. However the use of internal cooling is not always a must. It remains a first class center drill also for „conventional“ applications. A double point provides for more cutting stability. The tool with 60° or 90° chamfers are combined with a 130° tip angle, which apart from a better protection of the cutting edges also guarantees a perfect centering for the subsequent drilling operation. The third type with a 120° point angle gives stable performance due to the point angle. The diameters are matched to the existing CrazyDrill program. CrazyDrill Twicenter is available from stock in diameters from 0,3 mm to 6 mm.
|
|
MP-X Drills
For Multi-Application drilling across a wide range of materials
CDX-Inox Drills
For Stainless Steel and exotic materials for drilling to 5 x D
CDX-DH Drill
For Deep Hole Drilling to 8 x D
|
|
Sutton Tools drills and surface coatings are manufactured in Australia and meet international standards.
Drill surface coatings are available in: Blue Finish, Bright Finish, Titanium Nitride, Titanium Carbonitride, Titanium Aluminium Nitride, and Nitriding.
These high performance coatings provide excellent toughness, resistance to wear, stress and corrosion, and present a superior work piece finish.
|
|
CDX-Inox Drills for Stainless Steel and exotic materials
* High productivity and consistent tool life when drilling in stainless steel, titanium alloys and nickel alloys to depths of up to 3 x D (R567) and up to 5 x D (R563).
* Significant reduction of “built-up edge.”
* Reduction of work hardening of hole surface.
* Consistent quality of surface finish and good hole tolerance.
* Excellent chip management and evacuation gives efficient machining and reduced machine downtime.
*Low thrust force at high penetration rates.
* Improved tool life
|
|
PRESS-FIT BUSHINGS
RENEWABLE BUSHINGS
LINER BUSHINGS
LOCKSCREWS & CLAMPS
CASTABLE BUSHINGS
CHIP-BREAKER BUSHINGS
DIRECTED-COOLANT BUSHINGS
OIL-GROOVE BUSHINGS
GUN-DRILL BUSHINGS
TEMPLATE BUSHINGS
Threaded Template Bushings
CIRCUIT-BOARD DRILL BUSHINGS
AIR-FEED-DRILL BUSHINGS
|
|
|
|
|
|
Drilling on inclined surfaces
Mikron Tool has developed a pilot drill for inclined surfaces, which affords in many instances a perfect pilot hole for subsequent drilling at an angle.
Centering or directly finish drilling; this represents no major problem as long as the tool hits the work piece at a right cutting angle. If the surfaces are curved or the drilling is applied at an angle, it becomes more difficult. In this case due to the resulting forces precise machining becomes a challenging task. The new pilot drill CrazyDrill Crosspilot has been developed to meet such challenges. In fact it can be used effectively for cutting angles with an inclination up to 60°. Thus it reduces the up to now required 3 machining steps (flat milling + centering + drilling) to only two operations (pilot drilling + drilling). The 170° point angle stands for a correct piloting for the subsequent drilling and prevents breakage of the cutting edges. By using a CrazyDrill for the execution of the subsequent hole it ensures that no gauged step is recognizable. The product range is matched to the existing CrazyDrill product lines. Diameters from 0.4 mm to 6.0 mm are available from stock with increments of 0,05 mm.
|
|
Drills Index - Drill Sets
- Various combinations available
- Metric and Imperial
- Ferrous & non ferrous application
- Cobalt drills have high abrasion resistance
|
|
AMEC HSS Super Cobalt
PVD Coated Production Drills
Features and Benefits
- HSS Super Cobalt Substrate
Allows longer tool life and increased heat resistance over HSS drills
- Preferred Point for Stainless Steels
135° split point
Self centering point
- Heavy Duty Construction
For increased tool strength
Reduces thrust for ease of penetration
- For Use in Most Materials
Stainless Steels, Tool Steels, Alloyed Steels, Titanium, Cast Irons and Carbon Steels, Free Machining Steels, Steels etc.
- Choice of Coatings
Balinit® Helica coating for greater abrasion resistance, extra sheer strength, lower adhesion tendency
AM200® for increased tool life and improved drilling performance
- Stocks
Stocked in Helica coating and uncoated condition from 1mm to 13mm diameter
Stocked in Stub, Standard, Long Length and Extra Long Length
- HSS Cobalt drills manufactured to DIN standards
|
|
Replaceable Head Drills
* High productivity across a wide range of materials, including carbon and alloy steels, stainless steel, titanium, nickel and cast iron.
* Two head types available - the Hydra-M head has been developed specifically to give optimum performance in Stainless Steel and cast iron. The Hydra-P head is recommended for steels.
* Consistently high performance, even after numerous head changes.
|
|
|
|
|
|
Revolution Drill™
The AMEC Indexable Drill Range
The AMEC range of adjustable indexable carbide drills provides the ultimate in versatility as they can be pre-set to cut any diameter hole within their range of 47.75mm to 142.75mm.
The AMEC Revolution™ drilling system uses 'over-centre' cutting to drill from solid without the need for a pilot hole.
Available in a range of shank styles and capable of drilling to depth up to 5 times diameter. The AMEC Indexable range is a powerful and versatile drilling solution that can delivery high productivity and a low cost per hole in a diversity of applications and industry sectors.
Features and Benefits
Drills from Solid, no pilot required
Revolutionary design allows adjustability upto 5.1mm on diameter
Drill Depths up to 4.5 times diameter
Removable cartridges for easy replacement
Insert design allows for excellent chip control and aggressive penetration rates
Less tool inventory needed for range of diameters
The proprietary AM200® coating increases tool life above competitors premium coatings.
|
|
MaxiDrill HFD - Drilling into solid material at high feed rates
- Stability
- Long tool life
- Abrasion resistance
- Swarf control - secure chip evacuation even when cutting long-chipping materials
- Holes without scoring caused by return movement
- Stable position of holes even under difficult conditions
|
|
The best drill we´ve ever developed
* Up to 100% higher productivity
* Closer hole tolerance and improved surface finish
* Four true cutting edges with Wiper
-Stronger drill body with new surface treatment can withstand higher feeds
-Wiper geometry for best surface finish
-Optimized chip channels for accelerated chip evacuation
-Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
|
|
Drills Morse Taper Shank
- Twist drill with morse taper shank
- Suitable for a variety of materials and industrial applications
- The tang at the end of the shank is used for ejecting the drill from
the socket or sleeve
- The drive and alignment is derived from the taper lock
|
|
|
HAM Diamond tools standard types or special designs for drilling, milling, countersinking and for pre- and precise machining
|
|
Drills
Drill, 3 mm shank
* Micrograin solid carbide drill
* with 130° point angle
* shank without clamping surface DIN 6535-HA
SchaftDrill, 3 mm shank
* Micrograin solid carbide drill
* with 165° point angle
* shank without clamping surface DIN 6535-HA
Drill, 1/8” shank
* Micrograin solid carbide drill
* with 130° point angle
* shank without clamping surface DIN 6535-HA
Drill, 1/8” shank
* Micrograin solid carbide drill
* with 165° point angle
* shank without clamping surface DIN 6535-HA
|
|
DX-Al Solid Carbide Drills for Aluminium
* High productivity when drilling in all types of aluminium.
* One tool can be used across the spectrum, from soft aluminium through to the most abrasive grades.
* Significant reduction in exit burr on component being machined.
|
|
HAM Multidrill – straight fluted drills especially for the machining of aluminium and cast iron.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
|
|
|
|
Sutton Tools recognises the relentless challenge facing metal working industries to produce faster and more efficiently than ever before and is pleased to provide the high performance market with the most cost efficient cutting solution with the release of it’s High Performance Range of Drills.
The comprehensive range of high performance drills now includes Cobalt and Vanadium based grades of high speed steel(HSS-Co, HSSE-V), as well as the latest developments in Powdered Metallurgy high speed steel (PM-HSS) and Carbide ranges, manufactured to DIN standards, which are complemented by TiN, TiCNite, AITiN (multi-layer) and CrN ceramic surface coatings and state of the art Vacuum Heat Treatment.
There are so many variables that affect the final outcome, and hence overall cost effectiveness of a job, that selecting the right drill can be some what of a challenge.
However the Sutton High Performance Range has simplified this task, by colour coding the tools to the material group in which it is intended for, allowing you to quickly select the most suitable tool for your job.
For more information visit our website on http://suttontools/IndustrialDrills
|
|
ASC 320™ Solid Carbide
High Penetration Drills
Patent Pending Geometry For 3-20mm Diameter Product Range
Unique combination of geometry and coating allows for use in a wide variety of applications
Durability through reinforced shank
Through coolant design
Available in 3.5 x, 6x, and 9x drill depth to diameter ratios
Parallel core for optimum reconditioning opportunities
High productivity in difficult materials
Extended tool life
Excellent chip control
Ideal for use on Stainless Steel, Inconel, Hastelloy, Titanium etc.
|
|
HAM Superdrill – spiral fluted drills especially for the machining of steel.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
Drills Spotting
- Rigid twist drill
- For use to the depth of the point only
- Provides an accurate location “seat” for position accuracy
90º Point angle - offers hole chamfering & spotting with the one tool
120º Point angle - specifically for spotting, closely matches a typical drill point
- cutting edges of the following drill engage easily, for perfect hole location
|
|
CoroDrill® Delta-C, solid carbide drill
Precision with high productivity
Diameter range 3-20 mm
5 different types of drills made to your specific demands
A wide variety of step and chamfer options, geometry’s, diameters, lengths and coatings
Low cost per hole
CoroGrip holder - flexible alternative to shrink fit
Quick delivery
Regrinding service
CoroDrill® 880
High productivity with indexable insert technique
Diameter range 12-63,5 mm
A wide variety of step and chamfer options diameters, lengths and shank types
Modern Wiper inserts for high productivity
The safe tool for unmanned production
Low cost per hole
Quick delivery
|
|
|
Tools PCD out of polycrystalline diamond intended for drilling, turning, and hard milling of metals and various materials, such as aluminum and its alloys, coppers and its alloys, composites and other materials organic.
|
|
CrazyDrill Pilot
With the CrazyDrill Pilot, centering and drilling of a pilot hole up to 2 x Ø is carried out in one single operation, thereby guaranteeing tight tolerance for the follow-up drill process. A 90° chamfer is cut at the same time. Diameter ranges and tolerances are matched to the CrazyDrill program, making it suitable for perparing to drill deep holes over 6 x Ø in length. Its special high-performance geometry combined with optimum coating increases the service life many times over while maintaining constant drilling precision.
The CrazyDrill Pilot is available from stock, in diameters 0.4 – 6.0 mm ( .016" - .24") in increments of 0.05 mm ( .002") and of 0.1 mm for diameters above 4 mm, with a standard chamfering and centering length of 2 x Ø.
|
|
Posicut Twist Drill
- H.S.S. Ø 0.002" - .087"
- H.S.S. Ø 0.05mm - 2.20mm
- Carbide Ø 0.0039"- 0.0971"
- Carbide Ø 0.10mm - 1.45mm
- Reinforced Shank & four facet grinding.
Asycut Drill Reamer
- Solid Carbide Construction.
- Inch Ø 13/64" - 3/4"
- Metric 3mm - 20mm
- Coolant fed up to 5xØ standard.
Tricut Drill Reamer
- Solid Carbide Construction.
- Inch Ø 0.028" - 0.551"
- Metric Ø 0.70mm - 14.00mm
- Degressive helix angle to aid chip evacuation.
|
|
|
|
