|
|
Drills are basic manufacturing tool whose speed, precision, and safety have an important bearing on the quality and efficiency of production operations.
OSG is gaining an increasingly large share of the drill market through the development of drills that ensure superior productivity.
Used in combination with OSG's taps and end mills as a total tooling solution, OSG drills provice manufacuturers with various business advantages, including cost savings.
Try with our:
- EX-SUS-GDS/GDR drills for stainless steels (No pecks anymore!)
- VP series for hardend steels with high speed drilling
- SH-DRL for quenched and tempered steels (up to 70 HRC!)
- etc....To request more information, please visit our Literature Request Page |
|
Shaped carbide, either discs or stars, are brazed
onto drilling tools that are used to cut steel casing or
to help remove down-hole junk. |
|
hydra 5D
two screw and one screwdriver are included with a drill body
d1Inch d1mm d1decimal Inch l2mm l1mm
15/32 11.91 0.4688 69 130
12.00 0.4724 69 130
31/64 12.30 0.4844 69 130
12.50 0.4921 74 140
1/2 12.70 0.5000 74 140
13.00 0.5118 74 140 |
|
MP-X Drills
For Multi-Application drilling across a wide range of materials
CDX-Inox Drills
For Stainless Steel and exotic materials for drilling to 5 x D
CDX-DH Drill
For Deep Hole Drilling to 8 x D |
|
Application material group
magnetic soft steel
structural steel case carburising steel
pain carbon steel
alloy steel
alloy steel/hardened and tempered steel |
|
Sutton Tools drills and surface coatings are manufactured in Australia and meet international standards.
Drill surface coatings are available in: Blue Finish, Bright Finish, Titanium Nitride, Titanium Carbonitride, Titanium Aluminium Nitride, and Nitriding.
These high performance coatings provide excellent toughness, resistance to wear, stress and corrosion, and present a superior work piece finish. |
|
* Deep drilling in “one hit” to 8 x diameter - no pecking required - reduction in machining time.
* Fast and efficient chip evacuation leading to high productivity and reduced cost per hole.
* High quality finish, good hole tolerance.
* Consistent forces.
* Improved tool life leading to a reduction in machine downtime.
* Exceptional levels of performance in steel,
stainless steel, cast iron, copper, aluminium and other materials. |
|
Productivity
PFX drills offer the link in productivity between standard and high performance drills. The PFX will also achieve significantly deeper holes in one pass, maintaining increased productivity over conventional drills.
Range
The PFX for heavy duty materials is available in all lengths:
Stub, Jobber, Long Series and Extra Length.
For the light duty materials Jobber and Long Series PFX are available. |
|
Sutton Tools recognises the relentless challenge facing metal working industries to produce faster and more efficiently than ever before and is pleased to provide the high performance market with the most cost efficient cutting solution with the release of its High Performance Range of Drills.
The comprehensive range of high performance drills now includes Cobalt and Vanadium based grades of high speed steel(HSS-Co, HSSE-V), as well as the latest developments in Powdered Metallurgy high speed steel (PM-HSS) and Carbide ranges, manufactured to DIN standards, which are complemented by TiN, TiCNite, AITiN (multi-layer) and CrN ceramic surface coatings and state of the art Vacuum Heat Treatment.
There are so many variables that affect the final outcome, and hence overall cost effectiveness of a job, that selecting the right drill can be some what of a challenge.
However the Sutton High Performance Range has simplified this task, by colour coding the tools to the material group in which it is intended for, allowing you to quickly select the most suitable tool for your job.
For more information visit our website on http://suttontools/IndustrialDrills |
|
The ISO norm 60 centre drill is the most universal type, Magafor offers eight quality options to answer to all machining cases :
Classic
Hss
Hss-Co
Hss-Co + TIN
Hss 8% Co
Hss 8% Co + Red'x
Carbide
Carbide + Hard'x
page 16 to 28 from Magafor 701 |
|
PATENTED PCD DIAMOND DRILL BIT
* Vastly improved drill life
* Improved drill hole surface finish
* Greater tolerance control
* Greatly reduced downtime due to fewer drill changeovers and quality checks
* Rugged construction enables the Everlast drill to handle difficult conditions that damage other drills beyond use
* Increased drill speeds and feeds
* Designed for very high silica aluminum
* Designed for many current composite materials - Kevlar, etc. |
|
To many, it might seem that a round hole in glass is nothing but air.
On the other side, you know that it sometimes implies a great technology.
As a matter of fact, TYROLIT Vincent provides you with the best solution for glass drilling: the diamond core drills.
Availaible in the widest range of diameters, TYROLIT Vincent diamond core drills ensure high cutting performances and clean glass edges, high and constant quality of the tool and prolonged durability.
Furthermore TYROLIT Vincent gives you the full service of a proven global supplier with a local-worldwide presence. |
|
| Designed for portable and machine drilling in a broad range of steel, ferrous and non-ferrous materials (bright finish in non-ferrous), under many different conditions. TiN coating with increased surface hardness allows for extended tool life, greater lubricity, better chip ejection, increased productivity, and lower horsepower requirements. |
|
The new Posidrill Plus system offers excellent performance in short-hole drilling. The body and insert combination offer an unbeatable combination for 2x (all drills above 2.500 ) or 3x diameter short-hole drilling. The Posidrill Plus replaces the Posidrill II.
- A unique pocket design preventing slugs as the drill
exits the component. This allows stacked plates and
welded assemblies to be drilled.
- Multiple inserts in each flute for larger drills break the
cut into smaller sections. This reduces the power
consumption, creates more manageable chips and
allows for excellent chip evacuation.
- Use in static and rotating applications.
- Able to bore up to 10% hole diameter
- Excellent performance in stainless steels |
|
SHARK-Drill Catalogue
• SHARK-Drill
• Cutting inserts
• VHM twist drills
Perfection: ARNO tools in use! |
|
The Unidrill product range is a replaceable insert system with the capability of drilling several diameters with one body. Both HSS and carbide inserts are available for drilling all materials.
Geometry CR Grade SP9336
(T15 High Speed Steel with TiAlN PVD coating)
For machining steels, cast irons (including nodular) and non-ferrous materials. This geometry has cross ground point, radial land, chip splitters and a corner protection radius.
Diameter range 10mm - 25mm / 0.390" 1.000" |
|
|
The Interloc drive system was designed for extended reach machining applications, which can consist of heavy roughing or deep pocket finishing. The Interloc System is designed so that a modular tool can equal the strength of a solid shank one. The Interloc system has a large variety of straight, taper reach, CAT 40, CAT 50, and integral shanks with interchangeable cutter heads. This versatility will allow you to machine deep cavities with Ball nose, Back draft, Flat endmills, CDW style Cermet or Carbide inserts. Fast efficient roughing from feeds of 50 IPM to over 100 IPM on even low horsepower machines.
|
|
The magafor step drills are designed for combining both boring and counterboring for standardized capscrews in a single operation. Thei short concept offers to the user :
_ rigidity
_ performance
_ reduction of the costs
Materials :
Hss-E Cobalt
Hss-E Cobalt + Red'x
RED'X : Coating with 3500 HV hardness. Designed to alloys, pre-treated steels, or for intensive production.
Angles : 90 - 180
Diamtres : M2 M14
Step drills before threading :
These step drills are designed for combining both boring and counterboring before threading operation. Their conception insures rigidity and longer tool life. Particularly recommended for NC-machine utilisation.
Material : Hss-E Cobalt
Angle : 90
diameters : M3 to M16
Step drills long reach :
The magafor step drills, long series, are designed for deep borings or those in places that are hard to reach, for installing aluminium section bars, metal trim, traditionnal woodwork trim.
Material : Hss-E Cobalt
Angle : 90
Diameters : M4 to M10
pages 52 and 53 from Magafor 701 |
|
90 degree angle :
By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation.
120 and 140 degree angles :
The preliminary hole obtained with the magafor NC drill corresponds to the angle at the end of the tool used in drilling and prevents it from deviating.
Magafor offers eight quality options :
Classic
Hss
Hss-Co
Hss-Co + TIN
Hss 8% Co
Hss 8% Co + Red'x
Carbide
Carbide + Hard'x
Many angles are available :
90 - 120 - 140
pages 30 to 33 from Magafor 701 |
|
With a sibngle tool, drill up to 14 different diameters : multi-steps drill for sheets and thin materials.
Material : Hss +TIN
Deburrs
Spiral flutes = easier tool penetration
3 flated shanks = better holding
TIN coating = extended tool life
Diameters :
12 (4-5-6-7-8-9-10-11-12)
20 (4-6-8-10-12-14-16-18-20)
30 (4-6-8-10-12-14-16-18-20-22-24-26-28-30)
38 (6-9-13-16-19-21-23-26-29-32-35-38)
page 46 from Magafor 701 |
|
Diamond core bits also called diamond core drills or diamond drill bits,they used widely for concrete ,reinforced concrete hole drilling,granite,marble stone drilling applications,as a professional manufacturer and supplier of diamond core bits in China,we can supply concrete diamond core bit ,granite stone drilling core bit,we can produce core bits according to customers request , please feel free to contact us for bits inquiry.
@@We can also supply PCD for diamond core bits ,if you need,please inform us the PCD diamond layer thickness,total thickness etc. |
|
This range of drills is specifically designed to meet the challenges of difficult drilling applications. Available in Fractional, Number, Letter and Metric sizes in Stub, Jobber and Long series lengths.
Product Types :
- UDL Designed for LONG CHIP FORMING MATERIALS,
such as Aluminium, Copper and Stainless Steels,
with special "UX" point or Split point
- UDS Designed for SHORT CHIP FORMING MATERIALS,
such as Titanium and Nickel Chrome Alloys,
with special "UX" point or Split point.
- UDC Designed for CAST IRON and ABRASIVE MATERIALS,
with special "DX" point. |
|
High precision paper drill bits from Hang are maufactured of high quality steel and are designed
for long life. Different types and grades of drill bits guaantee the best results no matter if you want
to drill paper, cardboard or foil.
If you want your drill bits to have a long life it is important to choose the right drill bit from the start - and to maintain the highest efficieny by regular resharpening.
It is equally important to ensure that you have the ideal machine for its required purposes. |
|
|
|
