|
|
* big range of Portable Magnetic Base Drilling Machines and more
* manual but also automatic feed
* max. plate thickness of 75mm
* hole diameter up to 55mm
* up to 950 rpm
Please find more details about our Portable Magnetic Base Drilling Machines and lots of other tools in our Machine Tools Catalogue here on Direct Industry or send an email to info@nitto.de or visit our homepage on www. nitto.de
|
|
|
|
|
|
The automatic plate systems are suitable to process heavy steel plates with a thickness up to 40 mm.
The CNC controlled plate processing machines are able to punch, drill, tap, centre point, deburr and mark heavy steel plates automatically.
V250 Plate punching system
The V250 plate punching system is consists of a hydraulic triple punching machine and a X-Y table with hydraulic material clamping. A drilling unit, an automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the drilling unit, steel plates can be provided with holes, which cannot be punched, due to the material thickness restrictions.
V200 Plate drilling system
The V200 plate drilling system consists of a CNC-controlled vertical drilling unit and a X-Y table. With the V200, steel plates, pre-cut to a certain dimension, are automatically provided with holes and screw taps. The X-Y table has a double hydraulic material clamping system. Automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the deburring unit the drilled holes will be deburred automatically from the underside.
|
|
|
Robust and structurally balanced, providing excellent rigidity and thermal and mechanical stability-all resulting in improved accuracy, finish and tool life. The compact GX 480 DT drill/tap center offers exceptional and unprecedented speeds and feeds for high productivity
|
|
K1BL
High-speed hole EDM by Sodick for micro-holes of 0.08 mm diameter
The K1BL is an easy-to-use micro-hole EDM machine for hole diameters up to 0.08 mm.
Its strengths lie in the machining of steels, nonferrous metals, and other difficult materials. With a linear drive for the z axis, it operates with vibration-free precision and high dynamic response in the drilling of holes between 0.08 and 0.25 mm in diameter.
Highly responsive linear motors secure continuous and high precision drilling of very small holes down to the use of 80 micron electrodes. The machinining scope of K1BL, equipped with a Sodick linear motor on the main (Z axis) completes the range. In addition the high response of the linear motor increases the machining speed and reduces the electrode wear significantly.
|
|
PRO 36 RH is powerful, compact and light weight machine equipped with petrol Honda 4-stroke engine for drilling in rails. Fast positioning, quick clamping and instant unlocking mechanisms make it easy to use and safe device.
PRO 36 RH enables drilling in rails of any standard by means of 2pcs of optional rail profile templates and 1pcs of hole centre positioner, to be chosen by customers from a comprehensive range of auxiliary accessories dedicated to a variety of types of rails.
PRO 36RH - Technical specification
Spindle/Tool holder: Arbor 19 mm; 3/4" Weldon
Milling Cutter(Core drill): Ø 12 - 36 mm (1/2" - 1 7/16")
Special twist drill: Ø 1,5 - 16 mm; 1/16" - 5/8"
Stroke: 39 mm (1 9/16")
Max depth of cut: 30 mm (1 3/16")
Motor type: 4-stroke petrol engine
Power consumption [W]: 1500
Motor Power [W]: 1500
Speeds [rpm]: 225
Weight: 23 kg (49 lbs 10 oz)
|
|
Bench drilling machines F22 is equipped with variable-speed drive-unit that allows the ideal choice of speed according to the material and to the drilling diameter.
The spindle-speed control-level and all the electrical control devices are grouped on the front size of the machine in order to allow an easy utilization.
F22 is available column and on pedestal.
Drilling capacity on R50 steel mm ø 22
Tapping capacity on R50 steel mm M 14
Spindle-intake MT2
Column diameter mm 98
Transmission Variable drive unit
Bench model dimensions (h x w x d) mm 1.310 x 450 x 630
|
|
CFL: Automatic Drilling and Tapping machine for bars and contours
The machine is equipped with a special application that allows the feeding of pieces, also of remarkable length, in order to execute automatic drills and
tapps online.
The X and Z axes are synchronized for automatic cycles in this way the C.F.L. is the fastest solution for the workings in series of tubes,contours, or bars of various nature. Particularity of the machine is the great fl exibility, in fact it is possible to execute reamings, beyond that drills and tapps with a fi x or variable centre distance on blocks with rapid intermediate feed, chip removal and temporary stop.
|
|
Varioflex MD 30:
The flexible high performance complete machining of cubic parts in a single clamping - with the deep hole drilling milling centre.
|
|
Machines:Standard andSpecial
Using the above products, Zagar is noted for the many special machines, designed, built and supplied to industry world wide. Using developed principles, Zagar has constructed many machines that are a cornerstone of the manufacturing industry.
|
|
PRO 35 - The most compact machine designed by Promotech, and one of the smallest units in the world. Superior features: ultra lightweight, easy handling, maintenance free rail guide system and sheltered motor power cord. It is equipped with the latest generation of electromagnetic base.
PRO 35 TECHNICAL DATA
Power supply: 920W, 230 VAC, on request 120 VAC
Magnetic force: max 9500 N
Magnet base dimensions: 80 x 160 mm
Motor speed: 350 rpm
Max milling capacity: 30 mm
Stroke: 70 mm
Arbor holder: 19,05 mm
Max depth of cut: 52 mm
Weight: 10,5 kg
PRO 35 230 VAC: Ordering No. WRT-0272-10-20-00-0
PRO 35 120 VAC: Ordering No. WRT-0272-10-10-00-0
|
|
UniBore 800
Flexible machine with multiple head technology
Modular machine concept for the processing of bores with Ø 0.4 - 4.0 mm
|
|
MicroBore 125
Eprouvée: plus de 100 fois par jour en production de série
Machine pour l’usinage des petits perçages de Ø 0.060 - 0.250 mm
|
|
MicroBore 20/50
For smallest bores
Micro Bore Sizing Machine for micro- bores with Ø 0.015 - 0.060 mm
|
|
CorBore 125
High stock removal
Machine with high stock removal rates and for the geometric corrections in the diameter range of Ø 0.060 - 0.250 mm
|
|
|
|
|
|
PRO 35AD-A is a small portable pneumatic drilling machine which allows cutting holes up to 35mm diameter in places with restricted space. This machine is the lowest height magnetic drill currently available on the world market.
Combination of pneumatic drive and permanent magnetic base eliminate the need of electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.
PRO 35AD-A Technical specification
Air consumption: 1400 l/min
Motor power: 800 W
Tool holder: 19 mm (3/4) Weldon
Milling Cutter (Core drill): Ø 12 - 35 mm (1/2 – 1 3/8")
Max depth of cut: 25 mm (1")
Stroke: 39 mm (1 9/16")
Cooling system: Through ring
Type of cooling fluid: Water soluble
Magnet dead lift (on 25 mm plate): 6500 N
Magnet dimensions: L x W x H 180 x 80 x 36,5 [mm]
7-1/16 x 3-1/8 x 1-7/16 ["]
Overall dimensions: L x W x H 480 x 168 x 180
18-7/8 x 6-5/8 x 7-1/16 ["]
Weight: 13 kg (28 lbs 1 oz)
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
|
The P10 fulfills even the highest requirements for maximum precision and handiness of state-of-the-art workshops. They are used for drilling, thread cutting, and milling operations in the demanding prototype and tool production as well as for training purposes and thus form the solid basis for an up-to-date machine train. The proven machine conception is permanently further developed and refined and contributes to the efficient and precise production of mechanical components on more than 10'000 shopfloors every day.
|
|
|
The HL 1000 machines crankshafts of max 1020 mm length and 265 mm diameter. With bore diameters of between 4 and 8 mm, and using minimal quantity lubrication, the HL 1000 offers its users a tool life far above the normal. All machining results - even those of massive 150 kg truck crankshafts - are subsequently checked with the workpiece still held in the chuck, and logged by the control system.
|
|
2-axes deep-drilling centre
Horizontal deep-drilling centre with ELB-System
Easy programming of the manufacturing parameters
Controlling of processing and evaluation
Large discs
Easy to observe
Possible to be loaded by crane
Very easy accessibility
|
|
3-axes deep-drilling centre with free-standing coolant tank
The Möck deep-drilling-centre is equipped with three axes X; Y; Z-axes and an employable drill centring with swarf disposal box. The swarf are transported via a telescope pipe directly onto the swarf conveyor. The oil flows through a filter system into the intermediate tank and is then pumped to the cyclone filter and to the supply tank.
The supply tank is dimensioned optimally in its volume; the tank holds 1000 l with a max. hole diameter of 25 mm.
The cooling oil is supplied to the rotary distributor of the spindle by two holes diameter-depending and manually added pumps. Distribution capacity and cooling oil pressure are electronically adjustable.
|
|
|
This line is the latest generation of Ficep drilling lines to process beams and profiles in an extremely quick, flexible and competitive way. The ORIENT 12 line, for the steel construction industry, has been optimized both in the overall performances and in the product design. The machine is equipped with one drill head (with relevant tool changer) that, thanks to a reduction gear, can be oriented in three positions at high speed reducing dead times in the cycle. The powerful spindle allows quick drilling operations using all kind of drills.
|
|
KDE 603 drilling machine for steel sections
For the processing of all common rolled steel profiles up to max. 600 mm width there is the 3 axis drill installation KDE with manual quick tool change system. Within its working range this drill installation, completed with transport system and band saw machine is offering surprisingly extensive possibilities like e.g. drilling, thread cutting, marking, center marking and sawing.
High production output thanks to 3 drill spindles and simultaneous operation
Short programming and setting times
Compact way of construction
Very complete supply
|
|
|
The Drill 11 is a production machine designed for the drilling of parts in hard materials such as hardened steel or carbide. Its drilling capability ranges from 0.3 to 3.0 mm diameter through a depth of 200 mm. Particularly simple and easy to use, the 3 axes (X, Y, Z) numerical control makes it possible to program a series of holes for fully automatic machining.
|
|
|
|
|
|
V600 Drilling System
The V600 drilling system is suitable for structural steel fabricators with a limited floor space. The operator loads the drilling table with several profiles behind each other, after which the horizontal drilling unit provides one or more profiles with the programmed hole pattern. By drilling holes through both flanges/sides or by rotating a profile it is possible to drill the material on all sides. Besides drilling the machine can also carry out thread tapping. A vertical hydraulic clamp, which clamps the product to the table during drilling, is fixed at the front of the drilling cabin. For tool changing, the drilling unit is provided with an automatic tool changers. After replacing a drill the length of the new tool is automatically measured and before starting the drilling process the web and flange height will be measured automatically. The holes in the flanges can be positioned with regard to the centre of the measured flange height or the actual web height.
Operating range
Min./max. height: 35 - 1.050 mm
VDH 1000 Drilling unit
Number: 1
HSS drill diameter: 8 - 40 mm
Carbide drill diameter: 13 - 32 mm
Thread tapping: M8 - M24
Spindle RPM: stepless 100 – 2.500 rpm
Lubrication: internal cooling air/oil
Holder: SK40
Automatic tool changer: VTC 5/40, 1 x 5 positions
|
|
STANDARD EQUIPMENT
OPTIONS
SNT3 base - Coolant unit - 24V illuminating attachment - Electrical tapping attachment - Quill powerfeed box 0,1 mm/t - Raising column - Intermidiate table - Micrometric feed box - 1PH motor - 3PH motor - Chuck guard security - Attachments - 2 speeds motor
|
|
STANDARD EQUIPMENT
OPTIONS
SNT 2 base - Micrometric feed box - Coolant unit (pump and tank) - 24 V illuminating attachment - Standard electrical tapping attachment - Intermediate table - Distance spindle / table + 100 mm - Quill powerfeed box ( 0,1 mm/t ) - Security switch/chuck guard - Vices and attachments...
|
|
STANDARD EQUIPMENT
OPTIONS
SNT 2 base - Micrometric feed box - Coolant unit (pump and tank) - 24 V illuminating attachment - Standard electrical tapping attachment - Intermediate table - Distance spindle / table + 100 mm - Quill powerfeed box ( 0,1 mm/t ) - Security switch/chuck guard - Vices and attachments
|
|
|
|
|
|
* NEW 3D and Multi-Axis-µEDM CNC controller SX-CU offers new possibilities on the Micro-Machining with new dedicated SARIX Technologies of 3D Micro-Milling. Its combination with a continuous automatic wear compensation spindle and a "built in "Micro Wire-EDM electrode grinding device opens up new perspectives on the micro machining of ;
* 3D Micro Milling of complexes forms with radius corner down to 3 microns
* perfect fins walls and microstructures
* high precision of smaller, deeper and more precise perfect round holes
* high surface finishing of Micro Sinking cavities
* NEW SX-MMI, "On-board", easy and user friendly unlimited programming and editing software.
* NEW SX-µEDM-CAM SARIX Modul compatible to ESPRIT CAD-CAM software, integrates the new Micro-EDMing process "Multi-Axis-Multi-Step" for the machining down to 10 microns with Ra up to 0.05.
* High precision machining and accuracy up to ±1 micron.
* High performance Micro Fine Pulse Shape generator SX-MFPS for 3D Micro EDMing machining using tubes and solid electrodes from 5 microns to 3.0 mm.
* High Speed Micro EDM Drilling Technology with automatic breakthrough detection device.
* "High production capability concept" upto 8 axis for complex work pieces with X-Y-Z, back slide W-axis (Z2), C and A/B indexing axi
|
|
Best-seller machine for drilling small holes
Drilling hardened hard materials to non-metal materials such as aluminum within seconds
Using Sodick’s original water-soluble dielectric fluid VITOL-KS developed for high-speed drilling, K1C drills holes with pipe electrodes Φ0.25 to 3.0 mmwithin a matter of seconds. The machine is capable of drilling a wide variety of materials from difficult-to-cut materials to aluminum and other non-metal materials (material: SKD11, thickness: 20 mm, electrode diameter: Φ0.8 mm, drilling time: 20 sec.).
|
|
|
|
