|
|
The automatism of this machine transforms a normal pillar-type drill into a versatile and economical drilling centre, which can work even without the presence of the operator, except for the upload and download of the profile.
The unit enables the automatic and precise advancement of the profile, the programming of the velocity and of the acceleration of both ways of the carriage. The drill has a pneumatic jaw with Millimetric regulation of the position of the punches and it also has a pump for the micro-lubrification of the machine tool. The operation of up and down load of the profile is rapid and the execution of the entire program takes place without the presence of the operator.
|
|
Drilling Machines Serie HT - DIGIT is a new design,delivered with an inbuilt dimension-programmer so that the typical functions of a 3-axis dimensional display an the machine's operating controls can be handled from a single key-board. It's also equipped with an electromagnetic clutch for automatic spindle downstroke.
TECNICAL DATA:
DRILLING CAPACITY DIAM.50MM
TAPPING ON STEEL R50 M26
C.M. 4
QUILL STROKE 145 MM
SPINDLE AUTOMATIC FEED 0,05-0.1-0,2
CROSS TABLE LONGITUDINAL STROKE 585
CROSS TABLE TRANSVERSAL STROKE 240
MOTOR POWE HP 3-4
|
|
SERIE R 40 E: ELECTRONIC VARIABLE-SPEED UNIT
High performance transmission with electronic potentiometer which regulate
the three-phases 2,2 kW - 380V motor;
2 speeds motor: • 1st speed’s rpm: 45-900 • 2nd speed’s rpm: 110-2150
Drilling capacity on R50 steel: 40Ø mm
Equipped with: • Thread-cutting unit • Digital speed counter
Easily adjustable spindle speed thanks to the electronic potentiometer;
Ideal for every type drilling, tapping and milling;
Precision spindle with hardened morse taper;
Safety screen protection covering 3 sides of the working area, as the new
regulations required;
Immediate rotation-stop for the user safety.
|
|
|
|
|
|
Features
1/2 HP Totally Enclosed Fan Cooled Motor™ – heavy duty power to bore through the toughest materials
Heavy duty construction – extra wide cast iron base, table, head and heavy gauge tubular steel column
Left/right hub – allows positioning of the crank handles on the left or right side of the head
Easy-to-use woodworking table – large clamping edges and four mounting slots make this table extremely versatile
Poly-V belt drive – limits vibration and improves power transfer
3-3/4 in. Quill travel – bore completely through a dimensional 4x4 in one pass
Feature-packed – smooth actuating rack and pinion table elevation, tilting table, quick release belt tension lever, built-in work light and chuck key storage
User-friendly handles and controls – Sof-Touch™ handles and knobs, high visibility bevel and depth scales and indicators
Large capacity – throat depth allows drilling to the center of a 15 in. workpiece. 5/8 in. chuck accepts 1/32 in. to 5/8 in. drills and Forstner bits, 12 speed settings to optimize rate for material, hole diameter and depth
Specifications
Input: 1/2 HP TEFC induction, 120 V
Number of Speeds: 12
No Load Speed: 300 – 3,100 r/min.
Chuck Size: 5/8 in.
Spindle Travel: 3-3/4 in.
Overall Height: 65-1/2 in.
Tool Weight: 158.4 lb.
Includes
Chuck key, hex keys, and wrench
|
|
STANDARD EQUIPMENT
OPTIONS
SNT3 base - Coolant unit - 24V illuminating attachment - Electrical tapping attachment - Quill powerfeed box 0,1 mm/t - Raising column - Intermidiate table - Micrometric feed box - 1PH motor - 3PH motor - Chuck guard security - Attachments - 2 speeds motor
|
|
STANDARD EQUIPMENT
OPTIONS
SNT3 base - Coolant unit - 24V illuminating attachment - Electrical tapping attachment - Quill powerfeed box 0,1 mm/t - Raising column - Intermidiate table - Micrometric feed box - 1PH motor - 3PH motor - Chuck guard security - Attachments - 2 speeds motor
|
|
| ... products without technical information |
| |
|
|
|
|
Genius 52 UV
Standardized sheetfed offset with waterless and UV technology without ink zones for printing on plastic and carton.
The economic strengths of the Genius 52 UV lie in small and medium-size print runs. Its most striking advantage is the small amount of setup work and the short period of time until the first "good sheet" is produced. It is inked up more quickly than other machines.
Specifications
General
Printing system: waterless offset printing
Printing units: 4 standard (or 5 optional)
Inks: UV-curing inks
Print substrates: from 0.1 to 0.8 mm (0.004 to 0.03"), (depending on substrate) PVC, ABS, PS, PE, PET, PC, carton and paper
Performance: max. 8,000 sheets/hour (depending on print substrate)
Stack height:
Sheet feeding 600 mm (23.62") max.
Sheet delivery 400 mm (15.75") max.
Formats:
Max. sheet format 360 x 520 mm (14.2 x 20.47")
Min. sheet format 210 x 297 mm (8.27 x 11.69")
Max. printing format 350 x 500 mm (13.78 x 19.69")
Gripper edge: 10 mm (0.39")
Printing plates: waterless, analog or digital
Format / thickness: 404 x 540 x 0.3 mm (15.91 x 21.26 x 0.0118")
Plate change: semi-automatic, register-true, complete plate change in less than 5 minutes
Length x Width x Height: 3,825 x 3,278 x 1,906 mm (150.6 x 129.1 x 75.0")
Footprint: approx. 12 m2 (129.2 sq.ft.)
Total weight: 6.2 tons (approx. 13,700 lbs)
Air consumption: 800 l/min (7 bar / 101.5 psi)
Power connection:
Connected load: 3 x 400 V / 230 V (± 10 %) TN-S-net, 50 Hz
Electric power: 50 kVA
Amperage: 84 A
Backup fuse: 100 A
Technical alterations reserved.
|
|
Pressure capacity: from 500N (50Kg) up to 120KN
(12,000Kg)
Position repeatability: +-0.005mm
Sensor function: Set position stop, Set load stop, Set
distance stop,
Const. Load / Set Timed Stop
Const. Load / Set Stop Position
External input/output: 17 input, 16 output
|
|
|
Electromechanical NC joining systems systems offer significantly more advantages than hydraulic presses. NC drive control allows accurate positioning or force-controlled joining and force-displacement evaluation in both the compression and the tension direction. The new generation of NC joining modules is outstanding for its extremely compact design with integral piezoelectric sensor.
|
|
|
Transfer SpeedFeeder has been developed especially for automatization of presses with multi-tool sets. Easy to operate with a hand-held terminal and AP&T's software LOGOS. Very high stiffness is reached with parallel motion of motors, this gives possibility to use high accelerations during clamping and lift motion.
|
|
Transfer systems for the transport of parts with the help of gripper rails in the complete sector of non-cutting shaping.Our transfer systems combine both the individual tools of a transfer press, as well as linking individual presses.
In accordance with the existing technical capabilities and customer needs are different sizes and variants feasible.
The equipment are based on our approved mechanical subgroups and a modern control and drive technique. The control control systems are preferably equipped with integrated Siemens components. By request are other control units available, for example by Allen Bradley.
Our transfer systems are fee-programmable which means that the positions and the displacement courses of the gripper rails (closing, lifting and transport) can be determined by the program within the limits of the technical data. According to the application or the specification the individual servodrives are synchronised either to each other or to the press run.
|
|
The electro mechanical assembly units of the PREFERENCE SERIES are available in a large selection of force ranges and nominal strokes. Due to their modular construction, the units can be integrated in automated assembly lines as well as in manual work-places. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
- Round steel housing with mounting flange
- Ball / Roller gear drive
- Force transducer
- Axial bearing
- Press ram
- AC-servomotor
|
|
|
The Leanmaster, the economic solution for filling tablet containers, was designed to permit the integration of various functions such as deburring and de-dusting, metal detection and in-process control. The tablets are discharged into their containers by vertically and horizontally pivoting conveyor belts. The fully automatic discharge can use up to 99 containers, which can, for instance, allow fast and easy removal on pallets. The Leanmaster is operated through the familiar user interface at the press terminal.
|
|
PMT: transfer line for quick EPS or EPP moulding of simple and complex items.
Ideal for large series (home appliance bases with film coupling, etc.)
The system holds three half-moulds that allow for simultaneous operations in masked times, like loading and unloading on one side while moulding on the other.
This series offers a wide range of mould area sizes, from 925x725 to 1200x1600 mm. The PMT supports multiple optional accessories and automation for loading (films, inserts...) and unloading of the processed items.
Alessio is about to introduce a new PMT model specially designed to load thermoformed caps and complex inserts, for the helmet market and others. This new solution will offer multiple advantages:
- Double production capacity of complex items
- No down times for load/unload
- Zero cost for special tools
- Total operator safety
- EPS moulding with inserts and complex geometries
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
