|
|
The automatic plate systems are suitable to process heavy steel plates with a thickness up to 40 mm.
The CNC controlled plate processing machines are able to punch, drill, tap, centre point, deburr and mark heavy steel plates automatically.
V250 Plate punching system
The V250 plate punching system is consists of a hydraulic triple punching machine and a X-Y table with hydraulic material clamping. A drilling unit, an automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the drilling unit, steel plates can be provided with holes, which cannot be punched, due to the material thickness restrictions.
V200 Plate drilling system
The V200 plate drilling system consists of a CNC-controlled vertical drilling unit and a X-Y table. With the V200, steel plates, pre-cut to a certain dimension, are automatically provided with holes and screw taps. The X-Y table has a double hydraulic material clamping system. Automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the deburring unit the drilled holes will be deburred automatically from the underside. |
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
| These are the most modern, rapid and flexible CNC lines to punch angles. Their main features are: low-cost; easy installation; automatic feeding; easy programming; flexibility for small/medium size pieces; new productivity concept. Besides the punching and shearing stations, a daisy wheel marking unit and a multifunctions unit, that can be "dressed" with extremely useful optional equipments such as double punching, notching and marking tooling, are also available. Angles are fed by means of a carriage with pincher in order to guarantee precision in positioning and reduced scrap. |
|
VP Marking, punching, drilling and shearing line for angle sections
VP range: VP 150 VP 160 VP 180 VP 200 VP 206 S VP250 - D
VP machines cover all machining operations: marking, punching, drilling and shearing.
The high-pressure system (400 bars) reduces production times and currently makes it possible to attain production rates of more than 1,000 operations per hour. Punching machines incorporate NC backmarking. The number (2 to 6) of punching units and the related power (50 to 93 tons) vary according to the size of the angle sections to work and the number of different diameters in each flange. The single-cut type shear (from 160 to 500 tons) prevents loss of metal and distortion. Blades do not need to be changed.
Highly appreciated by manufacturers of transmission towers and electrical steel towers, the automatic VP marking, punching, drilling, shearing lines for angle sections are controlled by a single operator. Reliable and designed for highest productivity, various types of works may be programmed.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
The option of the Plasma cutting of Imac production offers the flexibility that the user needs to get complex geometric figures and irregular shapes.
A high reliability, accuracy and flexibility are the main features of this machine together with the reasonable dimensioning and the competitive price if you consider that buying a Plasmaform you can use two machines in one.
The combined machine is equipped with the most qualified technology that you can find on the market. It's in fact equipped with Fanuc CNC (used by the biggest producers of machines for working metal sheet) and with a hydraulic group H+L (VOITH) that guarantees high reliability and good performances.
The Plasma source, fit on the machine, can be chosen according to the customer's needs. Imac has gained a big experience in working both iron and stainless steel on different thicknesses. We've in fact fit all kind of generators from Hpertherm to Kilberg and Thermal Dynamic. |
|
| The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed. |
|
| Foot operated hydraulic punching system for sheet steel for round holes up to 142.8mm diameter and square holes up to 142.8mm square |
|
The SML-F has been designed for the larger panel-builder producing floor-standing control panels which require quantities of round and square holes in proprietary, pre-painted enclosures. By using a foot pump, there is less operator fatigue and both hands are free to position the punch.
It uses standard SML 3-point industrial duty punches made from tool steel, hardened and ground. The design of the 3-point punch guarantees that the blank is easily removable from the die. Square and rectangular punches are machined from single blocks of high grade tool steel to give maximum strength and dimensional accuracy.
The foot pump has a smooth and powerful action. Pressure release is by means of a toe operated side lever to avoid bending down.
This is a 2-speed pump for rapid operation with automatic pressure limiting for safety.
An 11mm pilot hole is required for punches up to 26mm diameter. For hole sizes above this, a 20.5mm pilot hole is needed and this can be made using a standard 20.5mm punch and die.
The method of operation is exactly the same as for the SML-H.
A plastic carrying case is available as an optional extra.
|
|
Description:
- Punch 16 and 18 gauge structural studs in 5 seconds.
- Punch 200 holes per battery charge, 2 batteries included eliminating downtime
- Punches a 1.34 (34.1 mm) diameter hole in 16 (1.5 mm) guage steel. For use with Greenlee 712A bushings.
- Swivel head rotates 360° for use in tight corners.
- Pistol grip handle gives better leverage and reduces fatigue.
- Replacement punch and die.
- Lightweight 9.2 lb. tool provides heavy-duty performance. |
|
| ... products without technical information |
| |
New Bihler GRM 80P
Perfecting a best seller for your added value
The target was to further optimize the Bihler GRM 80E punching and bending machine, adapt it to suit the market’s increased demands, and in doing so automatically offer the market even greater productivity, flexibility, profitability and tool compatibility with the preceding GRM 50, GRM 80 and GRM 80E models. The result is well worth seeing and impresses through its advantages.
The new GRM 80P now provides significantly more free space on the work plate as a result of the clear spatial separation of punching and bending operations. In this way, additional tool movements and Bihler key technologies can be integrated as component systems into the manufacturing concept to solve complex applications. As a result, nothing can prevent the manufacture of longer and more voluminous parts. The powerful two-point eccentric press for longer cutting tools installed alongside the work plate and the large center aperture in the work plate also guarantee the flexible integration of central mandrel movements.
Mechanical or NC controlled feeds guarantee the high-precision supply of material. A user-friendly, highly-flexible process control enables the intuitive adjustment, management and operation of the machine.
|
|
| ... products without technical information |
| |
Specification:
Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch mild steel, aluminum, fiberglass and plastic. Hole Sizes/Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. Pg Sizes: European standard pipe sizes. ISO Sizes: International Standards Organization pipe sizes. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.
Description:
- Round Standard Metal Punch Units are complete units consisting of punch, die and draw stud.
- Use with battery-powered, hydraulic, ratchet or manual drivers.
- Properly assembled through pilot holes, they will make clean, fast and accurate holes. |
|
Hole Punch Cylinders
Designed to punch millions of holes in plastic or other thin sheet materials 2 to 3 mils thick, the long-life BIMBA Pneumatic Hole Puncher will give you more cycles per penny.
The hardened steel cutter with ground razor sharp edges is an integral part of the cylinder. A small air jet ejects the slugs from the cutter preventing slug build up, and Elastomer Bumpers insure cushion quiet operation.
Less than 1" in diameter, several cylinders can be closely mounted. Available in seven hole cutter sizes from 1 / 4 " to 5 / 8".
This stainless steel body, single acting spring return cylinder has a 3 / 4" bore and 1" stroke. A nickel plated steel rod guide is threaded for easy nose mounting, and a 1 / 8" NPT air inlet is conveniently located in the rear head.
Prelubricated with HT-99, the cylinder can be operated with ordinary shop air at pressures up to 250 psi. |
|
- Has 12 months and 6 years eliminatingthe arrow
replacement at the end of each year
- The 12mm Double Dater provides the same markings as
a standard dater
- The same height is always maintained between all rings |
|
| The daters are members who, lodged in the part figure of the stamp, allow as an example to identify the article printed with the fabrication date (day, month and year). |
|
| The inserti of money laundering they are members of identification of the product placed inside of the stamp. In the specific one it characterizes the tipologia of the transformed material and its riciclabilità. |
|
| ... products without technical information |
| |
| ACT/CUT: programming and nesting software for CNC cutting machines following contours (laser, plasma, oxyfuel, waterjet, routing...) and punch-presses. |
|
Lantek Expert Punch is a CAD/CAM system specially designed for automating the programming of CN punching machines.
Automatic and manual nesting with great flexibility and optimum performance.
Lantek Expert Punch improves the automatic loading and unloading of the sheets and automatic part removal.
It correctly manages Autoindex tools, Multitool stations and all types of tools for forming, embossing, drilling, threading, stamping, rolling, shearing, etc.
It enables micro-cuts to be automatically inserted in parts interwoven in the sheet. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
| |
