|
|
ImpactorHL-1800
Features:
- Compact machine
- Robust and reliable machine
- Low weight of 7000 kg
- High speed winch generates approx. 35 hits per minute
- Suitable for augering, hydraulic impact hammer and
displacement drilling as well
Advantages:
- Low ground pressure
- Working in low headroom area's (min. 2700 mm)
- High trade-in value
- 100% perfects piles
Benefits:
- Up to 50% increased productivity
- Up to 40% less labour costs
|
|
|
Our Long Tom rigs have been around for over twenty years, and are still in demand due to their simplicity and cost effectiveness. Designed to alleviate the negative aspects of hand held drilling and to improve drilling productivity.
|
|
Model J-352-LS Dual Boom Jumbo
For efficient drilling of headings up to 60'w x 35'h. Ergonomically-designed cab is heated, air conditioned and designed for reduced noise. Enough fuel and pelletizing water on-board for a full shift.
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
HYDRAULIC MINI PILE RIG
This line of equipment, was designed with the highest technology to attend all of the markets: like a mini pile jobs, anchoring, drains, injections, monitoring wells, rock drilling (top hammer or down hole hammer). The equipment WS-26 and WS-36 has 360º, can drill in all position and angles, presenting excelent performance and stability, can drill in narrow and low clearance rooms.
|
|
21 SGBC-CC
Three boom jumbos can be supplied with three different boom sizes. The light alloy feeders can be supplied in lengths from 14’ to 22’, to suit the customer’s requirements. The largest boom gives a maximum drilling height of 11,5 meters and a maximum face width of 16 meters.
Motabert HC 109 drifters are standard.
The jumbo can be supplied with or without a service basket. Rod handling equipment for longhole drilling is available. The jumbos are supplied with Bever Control computer systems. The systems can be adapted to level of automation required by the customer. Full logging facilities and m.w.d. are available.
|
|
Fleet of Robofore and Pantofore
Robodrill has at it's disposal a fleet of :
- 10 Robofores (3 booms)
- 20 Pantofores ( 1 boom, 1 boom + loading basket, 2 booms, 2 booms + loading basket)
These units are available for rent with mechanical supervision and operators training programs.
Mechanical supervisors and operators are available and can be provided if required.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
2 ABC-CC
This is a smaller jumbo with articulated steering and booms that give a maximum drilling height of 8 m. and a maximum face width of 13 meters. Light alloy feeders in lengths from 14’ to 22’, to suit the customer’s requirements are standard.
Montabert drifters are standard.
The jumbo can be supplied with or without a charging basket. Rodhandling equipment for longhole drilling is available. The jumbo is supplied with Bever Control computer system with a level of automation, logging facilities and m.w.d. to suit the customer’s requirements.
|
|
Two-Boom Hydraulic Jumbo MTI-2SB:
DRIFT RUNNER - MTI-2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in under ground production headings. It features two hydraulic percussion drifters, and can drive headings 24'-6" by 18' - 0" (7.5 m by 5.5 m).
|
|
Oldenburg Cannon's line of rock drills, drill jumbos, and roof bolters have earned a reputation for simplicity of use, rugged reliability, and lowest cost per meter drilled.
Jumbos are configured in double and single boom set-ups, with enclosed or open cabs. Each customer order is engineered to meet the needs of the mine plan.
|
|
|
|
|
|
Rock Drilling Jumbo Introduction
Among the development and research of the products, Sunward Intelligent independently researches and develops the key technologies of the control system, hydraulic control system and special mechanism of hydraulic rock drilling jumbo, which reaches the advanced level in the world. As the latest product in China, it has been included in the National Construction Machinery “15” Development Direction List. In the past, China relied on imports totally for this product, and this project effectively breaks the situation that the imported products dominate the market in the field, meanwhile it is of great significance to promote national development of large-scale construction machinery and improve technical tunnel excavation of China.
Rock Drilling JumboFeatures
·Telescopiform structure and lifting operator's cab. Ample space for loader to pass for discharging that minimize additional workload.
·High positioning accuracy, high drilling speed(up to 1.5-1.8m/min). less drilling bit wear.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
|
|
see the results for the following category : 
