|
|
|
|
|
|
The QXR is a track drill with a boom-mounted feed system that drills with a pneumatic DTH hammer.
The QXR 920 drills at sea level from 4 in (101 mm) to 6-1/2 in. (165 mm) diameter holes with a DTH Hammer to a depth of 140 ft. (42.7 m) without reloading the carousel and to greater depth with reloading. The drill is designed to flexibly switch between Production Drilling, Pre-Split or Pre-Shear drilling and with options Reverse Circulation sample drilling.
The QXR 1120 can be used to drill 4 in. to 8 in. (101 mm to 203 mm) holes with a DTH hammer, to a depth of 140 ft. (42.7 m) without reloading the carousel and to greater depth with reloading the carousel. The drill is designed to flexibly switch between Production Drilling, Pre-Split or Pre-Shear drilling and Reverse Circulation sample drilling.
The QXR 1320 can be used to drill 4 in. to 10 in. (101 mm to 255 mm) holes with a DTH hammer, to a depth of 140 ft. (42.7 m) without reloading the carousel and to greater depth with reloading the carousel. The drill is designed to flexibly switch between Production Drilling, Pre-Split or Pre-Shear drilling and Reverse Circulation sample drilling.
|
|
The King of all large diameter hole drilling machines.
Great turning ability in narrow bench,comfortable cabin.Easy to operate.
Advanced drilling system,high pressure high blow compressor,
and high power engine work hard for you at the job-site.
|
|
|
Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. These surface crawlers include several models that are ideally suited for bench drilling. Choose between hydraulic top-hammer, Atlas Copco's patented COPROD system, or down-the-hole drilling methods. The unique SmartRig will help you to drill smarter holes with high shift capacity, low energy consumption, and innovative modules that improve productivity. Atlas Copco's range of crawlers is setting new standards for stability, maneuverability and safety in quarries and contracting work.
|
|
SD 710
* DESCRIPTION
The SD 710 is a track mounted drill with an on board high pressure Booster compressor.
* PERFORMANCE
The SD710 that drills at sea level with a 3 inch, 4 inch or 5 inch DTH Hammer to a depth of 325 ft. (100 m). The drill is designed to flexibly switch between Blasthole Drilling, Grout hole, Pre-Split drilling, Over burden drilling and Reverse Circulation sample drilling.
|
|
The Ultimate combination of performance and economy.
New drifter design with automatic drilling system delivers the highest-possible drilling performance at low running cost..
|
|
MAXCAT Series
The Caterpillar latest technology at the DRILLER'S service
Drilling applications: Reverse circulation, RAB, Air core, Grade
Control, Core, Blast hole, Geothermal wells
Tie back, Foundations and more
MAX CAT-12
12 ft (3.65 m) stroke set on 312 Cat excavator
Great advantages
Caterpillar Worldwide service
Comfortable working environment
Compact and lightweight
Pipe handler
Mixe mode capacity RC, Core
150 m of 4 in pipe onboard
250 gal (1 125 l) water tank onboard
|
|
MAXCAT Series
The Caterpillar latest technology at the DRILLER'S service
Drilling applications: Reverse circulation, RAB, Air core, Grade Control, Core, Blast hole, Geothermal wells Tie back, Foundations and more
MAX CAT-24
23 ft (7.0 m) stroke set on 315 Cat excavator
Great advantages
Caterpillar Worldwide service
Comfortable working environment
Compact and lightweight
Pipe handler
Mixe mode capacity RC, Core
150 m of 4 in pipe onboard
250 gal (1 125 l) water tank onboard
|
|
|
|
|
|
Rotary Drilling Rig Introduction
With new technology of modern hydraulic pile machinery, Sunward Intelligent multifunction rotary drilling rig is a new kind of bored pile of construction equipment. The engines and other key components purchase in the world. It adopts its own telescopic track dedicated chassis, and its stability is better than the one adopts a similar rig of common chassis; By independent research and development, its control system integration features strong power, fast response and high accuracy; its drilling masts can load and dump automatically; furthermore, it has the feature of new luffing mechanism structure, strong drive force and good stability; it can be assigned with a variety of drilling tools, and it adapts to the complex geological conditions of clay layer, sand layer, gravel layer of weathered rock. It is widely used in highway, railway overpass, and the large-diameter pile viaduct piers and in the pile of the construction of high-rise buildings. It shows the advantages of Sunward Intelligent rotary drilling rig in national large-scale key projects such as the new airport in the capital and the national Olympic venues nest. In the international market, it gains high praise among the foreign counterparts of high levels.
|
|
|
Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. These surface crawlers include several models that are ideally suited for bench drilling. Choose between hydraulic top-hammer, Atlas Copco's patented COPROD® system, or down-the-hole drilling methods. The unique SmartRig™ will help you to drill smarter holes with high shift capacity, low energy consumption, and innovative modules that improve productivity. Atlas Copco's range of crawlers is setting new standards for stability, maneuverability and safety in quarries and contracting work.
|
|
The King of all large diameter hole drilling machines.
Great turning ability in narrow bench,comfortable cabin.Easy to operate.
Advanced drilling system,high pressure high blow compressor,
and high power engine work hard for you at the job-site.
|
|
Hydraulic rotary rigs
Self-mounting, easily transportable equipment which reduces cost of mounting and dismounting.
Capability of driving casing with rotary and piston/winch or in combination with casing oscillator.
|
|
ATD
* DESCRIPTION
The ATD is designed for many applications proven in Arctic operation. This 2 speed versatile drill moves on a rubber tracked, air ride suspension, with low ground pressure. The two man pressurized cab designed for extreme climate results in a highly productive machine with quick set ups and rapid penetration rates. The Rugged variable speed top drive rotation and efficient pipe handling for increased productivity on the job site can be equipped for DTH, Rotary, Auger or Core Drilling.
* PERFORMANCE
The ATD has a 750 cfm @ 350 psi rotary screw compressor, can provide 16,000 lb. of pullup and has a hydraulic breakout system with mechanized pipe handling. This unit is powered by a fuel efficient CAT engine. The two man pressurized cab is equipped with heat, A/C and all operator controls.
|
|
The King of all large diameter hole drilling machines.
Great turning ability in narrow bench,comfortable cabin.Easy to operate.
Advanced drilling system,high pressure high blow compressor,
and high power engine work hard for you at the job-site.
|
|
|
Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. These surface crawlers include several models that are ideally suited for bench drilling. Choose between hydraulic top-hammer, Atlas Copco's patented COPROD® system, or down-the-hole drilling methods. The unique SmartRig™ will help you to drill smarter holes with high shift capacity, low energy consumption, and innovative modules that improve productivity. Atlas Copco's range of crawlers is setting new standards for stability, maneuverability and safety in quarries and contracting work.
|
|
|
The Chimera drill is track mounted with a boom mounted feed that drills with a hydraulic Top Hammer.
|
|
|
Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. These surface crawlers include several models that are ideally suited for bench drilling. Choose between hydraulic top-hammer, Atlas Copco's patented COPROD system, or down-the-hole drilling methods. The unique SmartRig will help you to drill smarter holes with high shift capacity, low energy consumption, and innovative modules that improve productivity. Atlas Copco's range of crawlers is setting new standards for stability, maneuverability and safety in quarries and contracting work.
|
|
# DESCRIPTION
The Orion is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure.
# PERFORMANCE
The Orion can be used to drill from 3.5 in (89 mm) to 6 in. (165 mm) diameter holes to a depth greater than 330 ft (100 m). WITH OPTIONS: It can also be used for drilling 8.5 in. (216 mm) holes and occasionally reaming up to 17.5 in. (445 mm) diameter holes with a 12 in. hammer and up to 30 in. (762 mm) with the V-30 raise attachment.
|
|
# DESCRIPTION
The 6200W is a track mounted ITH drill designed to drill with a Wassara hydraulic In-The-Hole hammers powered with high pressure water. The water pump is quoted separately.
# PERFORMANCE
The 6200W can be used to drill with a W80 hammer for 3 1/2 inch (89 mm) to 4 1/4 inch (108 mm) diameter holes or a W100 hammer for 4 1/2 inch (114 mm) to 5 inch (127 mm) diameter holes to a depth greater than 330 ft. (100 m).
|
|
# DESCRIPTION
The HAS-100 is a track mounted drill Reverse Circulation drill designed to drill deep and large diameter holes.
# PERFORMANCE
The HAS-100 can drill both rotary bits or with I-T-H hammers. It has been used to drill with a 24 inch (609 mm) I-T-H Reverse Circulation hammer diameter holes to a depth over 1300 ft. (400 m). It can drill up or down holes and has the capacity to drill 30 inch (762mm) diameter hole to a depth of 500 ft (150 meters).
|
|
* DESCRIPTION
The LH1 Megamatic is a track mounted drill that is designed to drill with a hydraulic Top Hammer.
* PERFORMANCE
The LH1 drills from 2 inch to 3 1/2 inch (51 mm - 89 mm) , Diameter Long Fan Holes to 60 feet (20 meters).
|
|
# DESCRIPTION
The Aries is an ITH drill with a booster compressor mounted on a mobile center articulated carrier.
# PERFORMANCE
The Aries can be used to drill from 3.5 in. (89 mm) to 6 in. (165 mm) diameter holes to a depth greater than 330 ft. (100 meters) down hole. WITH OPTIONS: It can also be used for drilling 8.5 in. (216 mm) holes and occasionally reaming up to 17.5 in. (445 mm) holes with a 12 in. hammer and up to 30 in. with the V-30 raise attachment.
|
|
# DESCRIPTION
The Aquila is a hydraulic top hammer production drill mounted on a center articulated carrier design for high mobility in underground mines with ramp access.
# PERFORMANCE
The Aquila can be used to drill from 1 5/8 inch (41 mm) to 4 inch (102 mm) diameter holes to a depth greater than 65 ft. (20m). The range of drilling includes 360° ring of plane from horizontal to 15° past vertical.
|
|
|
Atlas Copco offers a comprehensive line of well-proven highly productive Simba production drilling rigs. With different feed lengths, rock drills and an extensive options programme we can offer the right Simba rig for every application.
|
|
* DESCRIPTION
The Heli-Drill is low ground pressure ballon tired articulated drill for off road remote drilling. This drill breaks into 9 assemblies that are transportable by a Bell Ranger Helicopter.
* PERFORMANCE
The Heli-Drill is designed to drill holes with a 3 inch, 4 inch, 5 inch or 6 inch DTH hammer to a depth of 656 ft (200 m). Drilling requires a separate compressor package, consult factory for specification based on application.
|
|
GEOTHERMAL DRILL RIGS
HBR 205 GT - Technical Data
- Engine power: 147 kW
- Width of crawler: 2500 mm
Mast:
- Stroke of rotary head: 4700 mm
- Extraction force: 200 kN
- Crowd force: 100 kN
Clamps
- Diameters: 68 ÷ 254 mm
Hydraulic drifter
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 17200 kg
|
|
GEOTHERMAL DRILL RIGS
HBR 504 GT - Technical Data
-Engine power: 147 kW
- Width of crawler: 2065 mm
Mast:
- Stroke of rotary head: 2970 mm
- Extraction force: 100 kN
- Crowd force: 50 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 19 kNm
- Drilling speed: 102 rpm
Weight:
- in working condition: 12500 kg
|
|
|
A world of grinding innovation from the global tree leader. Vermeer horizontal grinders are built tough and offered in a variety of configurations to suit large land-clearing and municipal waste operations. Trailer-mounted units are towable behind dump trucks or other trucks; they feature extra-long feed tables and adjustable-height hitches. Self-propelled track grinders are highly maneuverable and are able to work at uneven job sites and land-clearing projects. For increased efficiency, the track grinder can also drive between material piles. All horizontal grinders feature remote-controlled operation, an exclusive feed system, the patented Vermeer Duplex Drum and many other productivity-enhancing features
|
|
MINIPILING DRILL RIGS
HBR 203 - Technical Data
- Engine power: 141 kW
- Width of crawler: 740/1200 mm
Mast:
- Stroke of rotary head: 1040/2290 mm
- Extraction force: 60 kN
- Crowd force: 38 kN
Clamps:
- Diameters: 68 ÷ 230 mm
Rotary head:
- Torque: 26,6 Nm
- Drilling speed: 58 rpm
Weight:
- in working condition: 5200 kg
- Weight of power pack: 2600 kg
|
|
MINIPILING DRILL RIGS
HBR 205 MP - Technical Data
- Engine power: 147 kW
- Width of crawler: 2500 mm
Mast:
- Stroke of rotary head: 4700 mm
- Extraction force: 200 kN
- Crowd force: 100 kN
Clamps:
- Diameters: 89 ÷ 406 mm
Rotary head:
- Torque: 50 kNm
- Speed range: 62 rpm
Weight:
- in working condition: 17200 kg
|
|
TERRA MINI-JET MJLV 1400
• 8 tons thrust and pullback force
• maximum drilling lengths up to 120 m
• bore channels up to Ø 260 mm (depending on ground conditions)
• drill rods 1.5 m long
• bending radius 25 m
• extremly powerful with the new chain drive with no power losses at low speeds
• recommended hydraulic power 40 - 60 l/min at 175-235 bar
• equipped with ADBS (Automatic Drilling and backreaming System)
• ideal starting pit dimensions: 2.55 m long, 1.30 m wide, 0.30 m deeper than the drill axle.
• surface launch possible with optional accessories
• weight: 430 kg
• length: 2.30 m
• width: 0.60 m
• height: 1.15 m
• locating depth: 10-16 m (depending on the sonde)
|
|
|
|
