|
|
C800 HT H50
- Max depth: 87 m
- Max diameter: 2200 mm
- Max depth C.F.A: 34 m
- Max diameter C.F.A: 1600 mm
- Engine power: 440 kW
- Width of crawler: 3500 ÷ 5000 mm
- Shoes width: 1000 mm
Main winch:
- Line pull: 250 kN
Auxiliary winch:
- Line pull: 110 kN
Crowd:
- Extraction force: 400 kN
- Crowd force: 400 kN
- Stroke: 14000 mm
Rotary head:
- Torque: 545 kNm
- Drilling speed: 9 rpm
Weight:
- Weight in working condition: 125000 kg
|
|
B105 NG - Technical Data
- Max depth: 38 m
- Max diameter: 1300 mm
- Max depth C.F.A.: 17 m
- Max diameter C.F.A.: 600 mm
- Engine power: 147 kW
- Width of crawler: 2500 ÷ 3600 mm
- Shoes width: 600 mm
Main winch:
- Line pull: 105 kN
Auxiliary winch:
- Line pull: 45 kN
Crowd:
- Extraction force: 140 kN
- Crowd force: 90 kN
Rotary head:
- Torque: 100 kNm
- Drilling speed: 42 rpm
Weight:
- Weight in working condition 30000 kg
|
|
|
|
|
|
Median is a powerful, robust, very complete hydraulic drilling rig with innovating kinematics, alone in the world, patented with an intuitive approach.
Median is able to drill in all positions for the most demanding clients.
Use
Median can drill all work types : tunnels, anchors, ground nails, water-well drilling, micro-piles etc… Median can drill with all method types : bottom hammers, top hammers, rollers, coring, augers, up to 500 ft deep, in all azimuth.
Versatility
Its kinematics makes the rig very versatile, and the erection on a hole is very easy and quick. Median can be equipped with an inboard injection pump to obtain better performance, and with an articulated boom to put rods on the drilling axle. A diesel-electrical unit allows working in tunnels with very minimal pollution.
Performance
Median can be in position above a hole to drill, 3 times quicker than a conventional articulated rig. So it increases the industrial drilling rate a lot. Rotation heads are powerful to drill all types of ground.
Safety
Median is equipped with an articulated control panel which can be at the left or at the right, and with one portable control panel for the translation functions. Median is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
|
WIRTH supplies these drill rigs for special civil engineering in a series with torque levels from 140 - 400 kNm. The machines are mounted on a crawler chassis. Characteristic of all WIRTH rigs is that they can be transported complete with drilling mast. This is an advantage in terms of high mobility and short set-up times. Typical areas of application for these rigs are pile foundations by the dry boring method, the construction of secant pile diaphragm walls, CFA, partial and full displacement boring.
|
|
Apafor 440 and 450
Powerful and versatile drilling rigs able to perform all kind of coring, rotary and rotary-percussion dring operations.
Large speed and torque range thanks to the variable volumetric displacement hydraulic motor.
Fully self-sufficient version at disposal with its injection pump fitting.
DEUTZ diesel engine (440) or HATZ diesel engine (450).
Available with reinforced torque, especially for micro-piling (450MP).
Various technical adaptations possible and numerous options available.
|
|
|
A world of grinding innovation from the global tree leader. Vermeer horizontal grinders are built tough and offered in a variety of configurations to suit large land-clearing and municipal waste operations. Trailer-mounted units are towable behind dump trucks or other trucks; they feature extra-long feed tables and adjustable-height hitches. Self-propelled track grinders are highly maneuverable and are able to work at uneven job sites and land-clearing projects. For increased efficiency, the track grinder can also drive between material piles. All horizontal grinders feature remote-controlled operation, an exclusive feed system, the patented Vermeer Duplex Drum and many other productivity-enhancing features
|
|
TERRA MINI-JET MJLV 1400
• 8 tons thrust and pullback force
• maximum drilling lengths up to 120 m
• bore channels up to Ø 260 mm (depending on ground conditions)
• drill rods 1.5 m long
• bending radius 25 m
• extremly powerful with the new chain drive with no power losses at low speeds
• recommended hydraulic power 40 - 60 l/min at 175-235 bar
• equipped with ADBS (Automatic Drilling and backreaming System)
• ideal starting pit dimensions: 2.55 m long, 1.30 m wide, 0.30 m deeper than the drill axle.
• surface launch possible with optional accessories
• weight: 430 kg
• length: 2.30 m
• width: 0.60 m
• height: 1.15 m
• locating depth: 10-16 m (depending on the sonde)
|
|
|
|
|
|
|
GM-20A Drill, a light weight big-hole engineering drill, is im0proved and designed based on GM-20 drill. The new type drill unites the tower and machine body. This type of drill integrates the drill's advantages of the type's turn plates, the power heads and the main shaft drills. The drill has such advantages as high drilling efficiency and precision, powerful torque, wider ranges of speed and smaller coefficient of oversize of hole. It can drill in the ways of forcing feed or reducing bit load drilling by hydraulic system. Oil cylinders of the drill can raise or pull down the tower safely and quickly, move and fit the hole position conveniently. After moving the machine, the bit of two meter diameter can be directly lifted or run in. height of the tower is ten and five meters, which can directly pull down the steel cages. The assistant hoist's capacity is strong. The drill is equipped with step device as to fitting the hole position conveniently. The control handlebars are collected so easy to operating. The drill can be used in the drilling technologies of normal or reverse circulation in the quaternary period gravel or hand rock ground. The drill can be mainly used for big-hole grouting pole holes drilling of high building, port and bridge.
|
|
Terex® SKF Rotary Blasthole Drills
The SKF crawler-mounted blasthole drills are designed to drill from 6" to 10 5/8" (152-270 mm) diameter holes with rated pulldown and hoist capacity up to 50,000 lbs. (22,680 kg) and 47,100 lbs. (21,364 kg) respectively, in rotary or down-the-hole applications. 60,000 lbs. (27,216 kg) pulldown optional.
SPECIFICATIONS SKF ROTARY BLASTHOLE DRILL
Hole diameter 6" - 10 5/8" (152-270 mm)
Total hole depth Single-pass 33.2' (10.1 m); Multi-pass 173' (52.7 m)
Rated pulldown capacity Up to 60,000 lbs (27,216 kg)
Power unit Caterpillar, Cummins
Compressor Up to 1,700 cfm @ 100 psi
Compressor Option Up to 1,500 cfm @ 350 psi
|
|
CFA425 - Technical Data
- Max depth: 25 m
- Max diameter: 900 mm
- Engine power: 214 kW
- Width of crawler: 2500 ÷ 4000 mm
- Shoes width: 700 mm
- Torque: 112 kNm
- Drilling speed: 33 rpm
- Weight in working condition: 42000 kg
|
|
C800DH - Technical Data
- Max depth: 34 m
- Max diameter: 1600 mm
- Engine power: 400 kW
- Width of crawler: 3500 ÷ 5000 mm
- Shoes width: 1000 mm
- Torque: 358 / 421 kNm
- Drilling speed: 25 / 18 rpm
- Weight in working condition: 130000 Kg
|
|
The fully hydraulic TM105A crawler drill rig has been developed for use in many areas of the construction industry. It is used for disaggregation in quarries, forest road building, slope reinforcement drilling, drilling for blasting, trench drilling, etc.
The TM 105A is a fully hydraulic crawler drill rig with a articulated boom, carriage, hydraulic hammer and dust collector.
The undercarriage consists of a frame with crawler oscillation and corresponding components and bodywork.
The drill is powered by a diesel engine over hydraulic motors and wheel hub drives.
|
|
The fully hydraulic TM 255 crawler drill rig has been developed as a down the hole hammer drill rig for small and medium-sized quarries and drilling companies.
This rig is designed for drill-hole diameters from 92-130 mm and for drill-hole depths up to 32 m.
The TM 255 is a fully hydraulic crawler drill rig with a telescopic boom featuring 360° rotation, carriage with revolver magazine, a powerful down the hole hammer and dust collector.
The undercarriage consists of a frame with crawler undercarriage, the corresponding components and body work and a comfortable FOPS-ROPS cabin. The drill is powered by a diesel engine via hydraulic motors and wheel hub drives.
|
|
M3 E/D - Technical Data
- Engine power: 55/45 kW
- Width of crawler: 850/1200 mm
Mast:
- Stroke of rotary head: 700 mm
- Extraction force: 3000 kg
- Crowd force: 3000 kg
Clamps:
- Diameters: 40 ÷ 254 mm
Rotary head:
- Torque: 8,2 kNm
- Speed range: 330 rpm
Weight:
- in working condition: 5740 kg
|
|
C14 - Technical Data
- Engine power: 165 kW
- Width of crawler: 2530 mm
Mast:
- Stroke of rotary head: 12000 mm
- Extraction force: 140 kN
- Crowd force: 140 kN
Clamps:
- Diameters: 90 ÷ 406 mm
Rotary head:
- Torque: 17900 Nm
- Speed range: 223 rpm
|
|
HYDRAULIC DRILL RIGS
HBR 502 - Technical Data
- Engine power: 82 kW
- Width of crawler: 1600 mm
Mast:
- Stroke of rotary head: 3375 mm
- Extraction force: 30 kN
- Crowd force: 30 kN
Clamps:
- Diameters: 27,5 ÷ 143,5 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 7900 kg
|
|
HYDRAULIC DRILL RIGS
HBR 609 - Technical Data
- Engine power: 190 kW
- Width of crawler: 2425 mm
Mast:
- Stroke of rotary head: 4950 mm
- Extraction force: 100 kN
- Crowd force: 100 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 21000 kg
|
|
HYDRAULIC DRILL RIGS
HBR 504 - Technical Data
- Engine power: 147 kW
- Width of crawler: 2070 mm
Mast:
- Stroke of rotary head: 3600 mm
- Extraction force: 35 kN
- Crowd force: 57 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 11000 kg
|
|
|
The DRILL 450 is a small size drill rig suitable to work in confined spaces. The equipment is designed to offer the advantages of the medium-size drilling machines.
|
|
|
The DRILL 830 BB unit is the powerful medium size rig suitable for multi-directional drilling operations. The machine has a separated power pack is designed for soil consolidation applications, micro-piling operations, anchors, core drilling and jet grouting.
|
|
|
The DRILL 830 B unit is the powerful medium size rig suitable for multi-directional drilling operations. The machine has a separated power pack is designed for soil consolidation applications, micro-piling operations, anchors, core drilling and jet grouting.
|
|
|
SummaryYGSL-120 Track-type Multifunctional Drilling Rig is a dual-top drive power head drilling machine of tract chassis with full hydraulic drive .It extends the applied rang of construction. The rig is applied to the big tonnage stress anchoring hole for water power station, railway, highway, the high-pressure jet grouting hole in the gravel land and to the demolishing hole of construction. It is also used to drill small size water well and foundation pile holes, as well as drainage well.
|
|
Terex® R20C Hydraulic Track Drills
The R20 / R20C utilizes the robust HPR4519 rock drill that is field serviceable, and has fewer total parts than competitors, making service a breeze. We offer optional 51 mm steel capability on and reliable linear rod changer that provides trouble free operation. The R20 is powered by Isuzu 6 cylinder tier II engine. Dust collector is powerful and efficient and our hydraulic system is simple and easily maintained.
SPECIFICATIONS R20C HYDRAULIC TRACK DRILL
Hole Diameter Up to 4" (102 mm)
Power Unit Isuzu
Fuel Tank Capacity 80 gallons (303 L)
Air Compressor Up to 250 cfm @ 150 psi
Rock Drill HPR4519 25 hp (19 kW)
Rod Changer Imperial 5 rods; 12' or 14'
Rod Changer Metric 5 rods; 3,658 or 4,267 mm
|
|
As the name suggests, foundation machines are used to build supporting pillars that make up the foundations of a building. Piles are broadly categorized into cast-in-place piles and ready-made piles.
We offer earth drills for cast-in-place piles, and pile drivers for ready-made piles.
|
|
|
|
|
|
YTRD160
Rotary drilling rig
Special Features:
Automatic power control function of engine speed realizes the closed-loop control on engine speed, hydraulic system pressure, and main pump output so as to ensure the engine cannot overload
Advanced negative flow rate control (CAT chassis) is adopted for the main oil way to ensure the flow rate is supplied upon demand
Override control with constant power and electrical power takes full advantage of the engine power
Key Specifications：
Maximum drilling diameter: 1,500mm
Maximum drilling depth: 55m
Rated output torque: 160N.m
Maximum output torque: 163N.m
Drilling speed: 7 to 32rpm
Maximum pressurized force of pressurized oil cylinder: 150kN
Maximum lifting force of pressurized oil cylinder: 165kN
Pressurized stroke of oil cylinder (S): 5,000mm
Angle of left/right inclination of mast: 6 degrees
Angle of forward inclination of mast: 5 degrees
Engine manufacturer: Caterpillar
Engine model: C7 ACERT electronic injection
Power: 147kW
Lifting force of main winch (first layer): 210KN
Wire rope diameter of main winch: 28mm
Maximum lifting speed of main winch: 77m/min
Lifting force of auxiliary winch (first layer): 120kN
Wire rope diameter of auxiliary winch: 20mm
Maximum lifting speed of auxiliary winch: 70m/min
Chassis model: CAT325D
Crawler belt width: 800mm
Equipment width in working state: 4,300mm
Equipment height in working state (H): 20,000mm
Equipment length in transporting state (L): 14,550mm
Equipment width in transporting state: 3,000mm
Equipment height in transporting state (h): 3,350mm
Chassis length (wheel track) (A): 4,300mm
Tractive force: 370kN
|
|
|
|
|
|
YTR260
Rotary drilling rig
Maximum drilling diameter: 2,000mm
Maximum drilling depth: 83m
Rated output torque: 260Nm
Maximum output torque: 265Nm
Drilling speed: 7 to 28rpm
Maximum pressurized force of pressurized oil cylinder: 215kN
Maximum lifting force of pressurized oil cylinder: 230kN
Pressurized stroke of oil cylinder (S): 5,330mm
Angle of left/right inclination of mast: 6°
Angle of forward inclination of mast: 5°
Engine manufacturer: Caterpillar
Engine model: C9 ACERT electronic injection
Power: 261kW
Lifting force of main winch (first layer): 270kN
Wire rope diameter of main winch: 32mm
Maximum lifting speed of main winch: 80m/min
Lifting force of auxiliary winch (first layer): 120kN
Wire rope diameter of auxiliary winch: 20mm
Maximum lifting speed of auxiliary winch: 70m/min
Chassis model: CAT330D
Crawler belt width: 800mm
Equipment width in working state: 4,300mm
Equipment height in working state (H): 22,580mm
Equipment length in transporting state (L): 16,700mm
Equipment width in transporting state: 3,000mm
Equipment height in transporting state (h): 3,450mm
Chassis length (wheel track) (A): 4,600mm
Tractive force: 510kN
|
|
FD60 on Mast - Technical Data
- Depth of excavation: 125 m
- Width of trench: 700 ÷ 1200 mm
- Lenght of trench:3130 mm
- Torque at the wheel axle:2 x 67 kNm
- Wheel speed: 0 ÷ 31 rpm
- Capacity of mud pump: 450 m³/h
- Mill weight: 33000 kg
|
|
FD90 hydromill - Technical Data
- Depth of excavation: 100 m
- Width of trench: 800 ÷ 1500 mm
- Lenght of trench: 3200 mm
- Torque at the wheel axle: 2 x 90 kNm
- Wheel speed: 0 ÷ 27 rpm
- Capacity of mud pump: 450 m³/h
- Mill weight: 52000 kg
|
|
|
|
|
|
Baya is the 3rd generation of hydraulic grab and has been tested numerous times in order to improve the drilling rates, which are the best available on the market, today.
It combines the advantage of the pendular grab (versatility) with the Kelly system (performance and quality).
Use
Baya can be used to construct diaphragm walls or prefabricated walls, cut off diaphragm, oblong piles etc… Baya drills up to great depths, into a large range of grounds (silt to strong sandstone with Rc 100 bar). Clients use Baya where they used hydromill before.
Versatility
Its erection is quick, and so is its dismounting with its cardan system and its quick transport kit, which allows carrying the boom elements at the same time.
Baya has a large range of drilling widths from 19.7’’ to 59’’ and a large range of drilling lengths from 106.3’’ to 165.4’’, thanks to the fast interchangeable elements.
Performance
Thanks to its penetration coefficient and its closing force, Baya’s energy is the most powerful in the world, and allows drilling into harder grounds or drilling more quickly.
Thanks to its Kelly and motorised turning joint, Baya can go into the drilling trench very quickly or can empty its bucket above a truck very easily. Finally, the automatic half turn allows better verticality. Baya’s clamshells are all equipped with one chisel allowing better penetration into hard grounds.
Safety
The assembling systems of the different elements are simple and quick, assuring work with safety.
|
|
With an innovating style but serviceable integrated, BAYA compact is mainly very fonctional, robust, with a high capacity grab, with a high cutter force, breifly a very hight efficiency. BAYA compact has been designed to increase the mud circulation and to reduce the maintenance costs.
Powerful, compact, modular to comply with all the drilling need of diaphragm walls or barettes , BAYA compact can drill down to 70 m depth. BAYA compact is equipped with an incorporated chisel to cut the hard layers.
|
|
|
|
