|
|
|
|
|
|
Baya is the 3rd generation of hydraulic grab and has been tested numerous times in order to improve the drilling rates, which are the best available on the market, today.
It combines the advantage of the pendular grab (versatility) with the Kelly system (performance and quality).
Use
Baya can be used to construct diaphragm walls or prefabricated walls, cut off diaphragm, oblong piles etc… Baya drills up to great depths, into a large range of grounds (silt to strong sandstone with Rc 100 bar). Clients use Baya where they used hydromill before.
Versatility
Its erection is quick, and so is its dismounting with its cardan system and its quick transport kit, which allows carrying the boom elements at the same time.
Baya has a large range of drilling widths from 19.7’’ to 59’’ and a large range of drilling lengths from 106.3’’ to 165.4’’, thanks to the fast interchangeable elements.
Performance
Thanks to its penetration coefficient and its closing force, Baya’s energy is the most powerful in the world, and allows drilling into harder grounds or drilling more quickly.
Thanks to its Kelly and motorised turning joint, Baya can go into the drilling trench very quickly or can empty its bucket above a truck very easily. Finally, the automatic half turn allows better verticality. Baya’s clamshells are all equipped with one chisel allowing better penetration into hard grounds.
Safety
The assembling systems of the different elements are simple and quick, assuring work with safety.
|
|
With an innovating style but serviceable integrated, BAYA compact is mainly very fonctional, robust, with a high capacity grab, with a high cutter force, breifly a very hight efficiency. BAYA compact has been designed to increase the mud circulation and to reduce the maintenance costs.
Powerful, compact, modular to comply with all the drilling need of diaphragm walls or barettes , BAYA compact can drill down to 70 m depth. BAYA compact is equipped with an incorporated chisel to cut the hard layers.
|
|
Within the family-operated Ditch Witch organization is the family of horizontal directional drilling (HDD) systems, designed and built by Ditch Witch engineers to work together with unbeatable efficiency. Components include the drilling rig, fluid management systems, the drill pipe itself, and integrated electronics that enable the tracker operator to disable power to the drilling unit's thrust and rotation. As families go, Ditch Witch HDD systems are the most functional in the underground construction industry.
COMPACT
Compact Ditch Witch directional drills are designed for easy setup and outstanding productivity in tight spaces.
MACH 1
Patented Mach 1 technology takes the guesswork-and the manual labor-out of pipeloading, drilling and other functions.
ALL TERRAIN
Patented Ditch Witch All Terrain technology is simply the most productive rock-drilling system available.
|
|
Track-mounted DH-DC1 (BTRK) 1 drill jumbo
The track-mounted DH-DC1 (BTRK 1) drill jumbo with telescopic drill boom is intended as a universal machine for high-performance drivages in medium section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
|
|
|
|
Futuro is the drilling rig with the best compromise of compactness / power / weight, in the world market.
Use
Futuro was specially designed for underpinning works (micropiles, (jet) grouting drilling, small soil investigations, water-well drilling, static compaction) with the classical drilling methods (destructive drilling, coring drilling, auger drilling, top hammer drilling, bottom hammer drilling).
Futuro can go through house doors of 29.7 inch wide, or can drill under 87 inch ceiling heights.
Versatility
Futuro can be equipped with masts for rods from 1 to 2 m long, with various rotation heads allowing drilling holes in many cases. Futuro can drill holes with 20° obliquity or drill vertically on the corner of the machine with lateral displacement of the mast.
Performance
Ground depending, Futuro can drill up to the following depths (indicative values) :
Bottom hammer :245 ft,
Destructive drilling : 165 ft,
Rock coring drilling : 82 to 195 ft (86 mm), or 265 ft (66 mm),
Auger drilling : 100 ft.
Safety
Futuro has been designed with the last safety technologies with the passive system of emergency stop. This system instantaneously stops all the moving functions of the machine (rotation, translation of the head, hammer), without voluntary human intervention. Futuro is also equipped with a portable control panel for the translation functions of the machine.
|
|
|
|
|
|
Galaxy was designed with the expertise of several soil investigation specialists. It is now the most complete, compact and powerful soil investigation drilling rig in the world, for the needs of the most demanding clients.
Use
Galaxy can do all types of soil investigation drilling : auger, conventional coring or with cable, destructive drilling with parameter recording, dynamic penetrometer, SPT etc…..
Versatility
With several inboard accessories, Galaxy can do all types of soil investigations on a job site. Galaxy can drill with water, with air, with top hammer, with bottom hammer, up to 650 ft deep. It can handle 6 m long rods.
Performance
The power, associated with several functionalities of the machine, allows obtaining drilling rates inaccessible until today.
Safety
Galaxy is equipped with an articulated complete control panel which is at the left of the machine, and with one portable control panel for the translation functions. Galaxy is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
ImpactorHL-1800
Features:
- Compact machine
- Robust and reliable machine
- Low weight of 7000 kg
- High speed winch generates approx. 35 hits per minute
- Suitable for augering, hydraulic impact hammer and
displacement drilling as well
Advantages:
- Low ground pressure
- Working in low headroom area's (min. 2700 mm)
- High trade-in value
- 100% perfects piles
Benefits:
- Up to 50% increased productivity
- Up to 40% less labour costs
|
|
|
|
|
|
Median is a powerful, robust, very complete hydraulic drilling rig with innovating kinematics, alone in the world, patented with an intuitive approach.
Median is able to drill in all positions for the most demanding clients.
Use
Median can drill all work types : tunnels, anchors, ground nails, water-well drilling, micro-piles etc… Median can drill with all method types : bottom hammers, top hammers, rollers, coring, augers, up to 500 ft deep, in all azimuth.
Versatility
Its kinematics makes the rig very versatile, and the erection on a hole is very easy and quick. Median can be equipped with an inboard injection pump to obtain better performance, and with an articulated boom to put rods on the drilling axle. A diesel-electrical unit allows working in tunnels with very minimal pollution.
Performance
Median can be in position above a hole to drill, 3 times quicker than a conventional articulated rig. So it increases the industrial drilling rate a lot. Rotation heads are powerful to drill all types of ground.
Safety
Median is equipped with an articulated control panel which can be at the left or at the right, and with one portable control panel for the translation functions. Median is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
Drilling equipment
deilmann-haniel mining systems drill jumbos and drilling equipment are the result of a decade-long , world wide employment in underground mining, tunnelling and gallery construction.
The range of drilling equipment comprises drill jumbos for blasthole drilling, mechanized rockbolting and extension drilling as well as long-hole drilling machines designed for mine-gas drainage and strata exploration activities.
Furthermore deilmann-haniel mining systems designs and constructs special drilling machines and systems for mounting on tunnel boring machines and roadheaders.
The modular design of the drilling equipment and components allows perfect adaptation to specialized drilling applications and greatly simplifies assembly and maintenance work.
Rugged, durable and cost-effective deilmann-haniel mining systems drilling machines have been tried and tested around the world under the toughest operating conditions.
|
|
Track-mounted DH-DC1 (BTRK) 1 drill jumbo
The track-mounted DH-DC1 (BTRK 1) drill jumbo with telescopic drill boom is intended as a universal machine for high-performance drivages in medium section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
Gemini Bolter
# DESCRIPTION
The Gemini is a Top Hammer, long hole, drill for production drilling and cable bolting scissor platform. It is mounted on a mobile center articulated carrier.
# PERFORMANCE
The Gemini is used for:
· Production drilling 1 5/8 in. (41 mm) to 3 in. (76 mm) diameter holes to a depth greater than 78 ft. (23.77 m).
· Cable bolting with precut multi-strand cables installed through a remote operated cable pusher.
· Drawing
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
Drilling equipment
deilmann-haniel mining systems drill jumbos and drilling equipment are the result of a decade-long , world wide employment in underground mining, tunnelling and gallery construction.
The range of drilling equipment comprises drill jumbos for blasthole drilling, mechanized rockbolting and extension drilling as well as long-hole drilling machines designed for mine-gas drainage and strata exploration activities.
Furthermore deilmann-haniel mining systems designs and constructs special drilling machines and systems for mounting on tunnel boring machines and roadheaders.
The modular design of the drilling equipment and components allows perfect adaptation to specialized drilling applications and greatly simplifies assembly and maintenance work.
Rugged, durable and cost-effective deilmann-haniel mining systems drilling machines have been tried and tested around the world under the toughest operating conditions.
|
|
|
WIRTH supplies a large range of shaft boring machines and drill rigs using different technologies, for the excavation of vertical shafts.
|
|
|
|
|
|
The AF_10 is a machining centre designed to cut to the utmost the time you have to dedicate to reinforcement fastening operations.
Because it features a loading roller conveyor and an unloading magazine, the bars are stored at exit. Once the profile has been inserted, movement, machining and unloading are all automatic. This way, the operator in charge of welding can take up the bars four at a time, thus cutting times down to the minimum. Or else the operator can dedicate him/herself with greater continuity to other operations required for the preparation of the welding bar.
The AF_10 offers various machining options: it permits having two screw pitch values and two distance values for the first screw from the outer point of the profile (tip of corner in case of 45° cuts, or outer point in case of 90° cuts for the crosspieces). What is more, it also carries out another operation of primary importance (selectable): because it has a lower motor, it drills frames for wall mounting preparation (or other jobs to be verified).
Finally, this is a machining centre which we recommend if you wish to increase the productivity of both a medium-sized workshop or an industrial workshop (in this latter case together with other machining centre and/or cutting/machining units)
|
|
The I.4F is an electro-pneumatic milling machinewith a vertical axis, fitted with a revolving head, equipped with four cutter-holding shafts.
This model allows you to fit four different cutting units with the relevant stops, and to use each time the required unit simply by turning the cutter-support head.
It is also supplied with orienting gripper to obtain cutting at 45° or intermediate angles.
The wide range of extra fittings allows very quick changes in working, saving time wastage caused by errors in setting up, by avoiding disassembly and assembly, with considerable increase in productivity.
|
|
Guard for workbench drill or column drill
- PETG screen.
- Adjustable height guard.
- Electrical micro-contact safety system.
- Waterproof switch.
|
|
| ... products without technical information |
| |
Modular high-performance CNC-turn-mill-centers
The UniCen is a turning and milling center with integrated B-axis where all requirements for complete machining have already been implemented: turning, milling, drilling and thread-cutting all on one machine. The workpiece is loaded on one machine only and can then be finished completely. With up to five interpolating axes even complex free form faces can be machined.
|
|
|
|
|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining.
|
|
|
|
|
|
The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully used for both cross and longitudinal slides.
Other machining operations can be performed with the Leonard system, like Boring, Milling or Drilling operations. The different working units can be Combined on a column with rotating base ("B" Axis) or on different Pallets to be manually or automatically installed in the carriage.
The Leonard lathe can be supplied with different type of Steady rests according to the work piece and the required machining.On demand different accessories are available like the work piece probe, the tool probe and the Automatic tool changer.
Safop has developed some special system for the measuring of high sophisticated work pieces like the turbine rotors. The Run Out Measurement System and Blade Measurement System are used with success by the main producers of this type of work pieces.
|
|
Drilling
Machining with coolant supply through the tool, regardless if the tool is in radial, axial or in an inclined position. Accuracy-killing changes between various machines is avoided.
Thanks to very high feed forces and high power also at low speed drills with large diameter can be used with optimum performance. A single look into the speed-power-diagram or the speed-torque-diagram shows the difference...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
