|
|
MINIPILING DRILL RIGS
HBR 203 - Technical Data
- Engine power: 141 kW
- Width of crawler: 740/1200 mm
Mast:
- Stroke of rotary head: 1040/2290 mm
- Extraction force: 60 kN
- Crowd force: 38 kN
Clamps:
- Diameters: 68 ÷ 230 mm
Rotary head:
- Torque: 26,6 Nm
- Drilling speed: 58 rpm
Weight:
- in working condition: 5200 kg
- Weight of power pack: 2600 kg
|
|
|
The DRILL 650 unit is the powerful medium size rig suitable for multi-directional drilling operations. The machine is designed for soil consolidation applications, micro-piling operations, anchorages, core drilling and jet grouting.
|
|
20R Double Power Heads GSHPs Crawler Drilling-rig
The geological equipment, 120R Double Power Heads GSHPs Crawler Drilling-rig is designed to make vertical and slope bores using the following drilling techniques and methods:
-- Dry auger drilling
-- Flush rod drilling
-- Casing pipe drilling
-- Percussion deepening
-- Micro-pile injection
-- Mud circulation drilling
-- Reverse circulation drilling
|
|
|
|
|
|
Futuro is the drilling rig with the best compromise of compactness / power / weight, in the world market.
Use
Futuro was specially designed for underpinning works (micropiles, (jet) grouting drilling, small soil investigations, water-well drilling, static compaction) with the classical drilling methods (destructive drilling, coring drilling, auger drilling, top hammer drilling, bottom hammer drilling).
Futuro can go through house doors of 29.7 inch wide, or can drill under 87 inch ceiling heights.
Versatility
Futuro can be equipped with masts for rods from 1 to 2 m long, with various rotation heads allowing drilling holes in many cases. Futuro can drill holes with 20° obliquity or drill vertically on the corner of the machine with lateral displacement of the mast.
Performance
Ground depending, Futuro can drill up to the following depths (indicative values) :
Bottom hammer :245 ft,
Destructive drilling : 165 ft,
Rock coring drilling : 82 to 195 ft (86 mm), or 265 ft (66 mm),
Auger drilling : 100 ft.
Safety
Futuro has been designed with the last safety technologies with the passive system of emergency stop. This system instantaneously stops all the moving functions of the machine (rotation, translation of the head, hammer), without voluntary human intervention. Futuro is also equipped with a portable control panel for the translation functions of the machine.
|
|
|
|
|
|
TD75 Electric/Hydraulic Drill
The TD75 was designed to install micropiles inside and around buildings, bridge footings and shafts. Powered by a 50 HP electric motor the TD75 uses rotary heads or drifters with torques up to 10,000 ft/lbs. The mast can be made to any height, accommodating even the most difficult access.
The rubber tracks utilize a unique scissoring design to open and close, this action allows the TD75 to close to an amazing 29.5 inches. Expanding out to 49.5 inches when drilling.
Electrical power to the TD75 can be supplied by a minimum of 75kW generator or by a 440 electric panel supplying 60 amps. By only using the single electric cable the TD75 is much more convenient to maneuver is tight spots than with rigs using a bundle of hydraulic hoses.
Think about a TD75 next time you have a limited access micropile job. The options available allow it to be tooled for most any drilling application. Drifters, Rotary heads, Double Rotary Heads combined with either single or double foot clamps can install most all of today's foundation solutions.
|
|
|
|
|
|
Galaxy was designed with the expertise of several soil investigation specialists. It is now the most complete, compact and powerful soil investigation drilling rig in the world, for the needs of the most demanding clients.
Use
Galaxy can do all types of soil investigation drilling : auger, conventional coring or with cable, destructive drilling with parameter recording, dynamic penetrometer, SPT etc…..
Versatility
With several inboard accessories, Galaxy can do all types of soil investigations on a job site. Galaxy can drill with water, with air, with top hammer, with bottom hammer, up to 650 ft deep. It can handle 6 m long rods.
Performance
The power, associated with several functionalities of the machine, allows obtaining drilling rates inaccessible until today.
Safety
Galaxy is equipped with an articulated complete control panel which is at the left of the machine, and with one portable control panel for the translation functions. Galaxy is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
|
For onshore exploration drilling, WIRTH has developed the successful B-Range drill rigs. Due to the modularity of the hydraulic boring system, this range can be used for a wide application of drilling operations. Typical for the B-Range is the freestanding, rigid mast which gives clear access to the borehole. The power rotation head has a multispeed gearbox with a stepless speed control in every gear.
|
|
|
|
|
|
Land and Offshore Containerised Drilling Rig LOC 400
In 2005 Huisman introduced the LOC 250, a fully Containerised Super Single Drilling Rig for use on land. Building on this experience we developed and constructed the LOC 400, a land and offshore containerised, 400 ton hook-load Rig. The LOC 400 is easy-to-transport and offers our clients the option to combine conventional DP drilling with the advantages of emerging Casing While Drilling processes.
Two of the most important features of the LOC 400 are the small footprint required and the possibility to break down the entire rig into 22 modules with the dimensions of standard ISO containers. Its modular design enables the LOC 400 rig to be used on land, on skid beams or on offshore platforms. The small footprint makes it very suitable for environmentally sensitive areas.
Complete package
Many conventional rigs are combinations of components and subsystems developed and maintained by different suppliers. The LOC 400 is a fully integrated, operational drilling rig that is offered as a complete package. All components have been tested to ensure trouble-free operation. The monitoring system includes satellite-linked remote diagnosis and troubleshooting, which enables our Engineers to solve any occurring problems by remote access.
Each LOC 400 is customised to meet our client's specific needs and is fully tested and commissioned before delivery. Additional modules such as extra mud tanks or mud pumps are installed on request.
Features
- Rig is build up from elements with standard iso container dimensions. Transport by road or rail is very cost effective.
- The rig moves in the field within 24 hours
- Very small footprint
- Super singles rig with horizontal setback and fast automatic pipe handler
- Suitable for conventional DP drilling as well as emerging CWD processes
- Suited for land, skid beams or offshore use
- Capable of tripping DP at 1700 ft/hr
- Less manpower required due to fully automated rig floor
- Safer operations due to automated pipe and material handling
- Improved drilling performance by use of Autodriller
- Offline BOP testing and BHA handling
- Integrated emergency backup systems for all vital drive systems
- Proven energy savings and reduced environmental impact
- Electrical driven, low noise level
|
|
|
The DRILL 1400 unit is the powerful rig suitable for multi-directional drilling operations. The machine is designed for soil consolidation applications, micro-piling operations, core drilling, tie-rods, water wells and jet grouting.
|
|
|
Sandvik water-well drilling rigs are designed to meet the contractor's needs for performance, value and flexibility. Developed from real work experience to meet very high demands, they are characterized by leading designs, quality workmanship and close attention to detail, which assures excellent function and great reliability. Fast hydraulic systems with powerful mud pumps and air compressors give outstanding drilling performance in a wide range of geologic conditions.
|
|
Explo750T
Drilling machine on tractor 4x4
75cv - Weight 4000 kg
Emci proposes to you a range of machine of 18 with 110cv. As a manufacturer, our vast choice of options and equipment for each category of product enable you to choose the adequate drilling machine and to configure it according to your type of activity.
|
|
|
Atlas Copco can offer the most comprehensive line of rotary blasthole drills in the industry. With a multitude of configurations to choose from you can find the perfect solution for your needs. Our blasthole products can meet your demands from 4" up to 16" hole diameter, and many models can be configured either for rotary or DTH drilling.
|
|
CFA Rotary Rigs
Self erecting hydraulic powered equipment mounted on SOILMEC crawler unit. A number of conversion kits allows the execution of: driven and cast-in-situ piles, prefabricated driven piles, vibrated driven piles, bored piles in rock, drains, continuous flight auger.
|
|
MAX-6
Diamond core drill
Carrier: Skid
Drilling techniques: Diamond core
Drilling applications: Mining exploration
* Easy to transport - Modular design
* Feed stroke: 6 ft (1,82 m)
* Lightweight
* Easily adaptable to existing cabins
* Can be adaptable for underground drilling with electric power
* Drilling angle limited only by the cabin
* Heliportable
|
|
MAX-12
Diamond core drill
Carrier: Skid
Drilling techniques: Diamond core (Reverse circulation optional)
Drilling applications: Mining exploration
Feature
* Modular design
* Lightweight and powerful
* Easily adaptable to existing cabins
* Unlimited drilling angle
* Can be adapted for underground drilling with electric power
* Heliportable
|
|
Atlas Copco, surface exploration drill rigs are built on experience by drillers for drillers. The rugged design, long-stroke feed, P-size rotation head and easy maintenance are some features making the CS-series rigs a natural choice. Atlas Copco surface exploration drill rigs are designed to increase
drilling performance and reduce costs.
|
|
HARDAB Series
One man drill rig operation with 670 ft (200 m) of drill pipe on board
Drilling applications: Geothermal drilling and water well
HARDAB 5000
11 000 lbs (5 000 kg) pull back
HARDAB 7000
15 400 lbs (7 000 kg) pull back
Great advantage
One man operation (no helper needed)
Pipe handler 670 ft (200 m) in 22 min.
670 ft (200 m) of drill pipe on board
Rotex overburden casing system
Cutting discharge collection system
Angel drilling capacity (45º to 90º)
Track mounted rig
Radio remote controlled crawling
|
|
Type TB 1300 V
Load max. 130 t
Operating load 100 t
Mast height (of 18m-leverage) 34 m
DEUTZ desk engine Power 400 kW
Rotary table load max. 150 t
Drilling depth max. 2800 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle
|
|
Type TB 1800 V
Load max. 180 t
Operating load 160 t
Mast height (of 18m-leverage) 36 m
External engine unit Power 2x400 kW
Rotary table load max. 320 t
Drilling depth max. 2500 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle, third front axle
|
|
Type TB 1600 V
Load max. 160 t
Operating load 130 t
Mast height (of 18m-leverage) 36 m
External engine unit Power 2x400 kW
Rotary table load max. 200 t
Drilling depth max. 3500 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle, third
|
|
Soil investigations
A new range of hydraulic geotechnical rigs, mounted on crawlers or trucks. All machines are equipped with high speed rotary heads for diamond cores.
|
|
|
The trenchless Horizontal Directional Drilling technology makes the laying of supply lines and pipelines underneath rivers, countryside and towns fast, economical and environmentally friendly. Herrenknecht Maxi and Mega Rigs are versatile specialists for underground pipelines and cable ducts.
|
|
Drift Runner MTI - 1SB
The MTI SB Series single-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Drift Runner MTI - 2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner MTI - 1XSB
The MTI XSB Series single-boom hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner LONGHOLE
Hydraulic center articulated four-wheel drive unit for long-hole drilling in underground mines. It is designed for vertical plane rings, fans and rings.
Montabert HC
1964/1991 : more than 25 years of creativity and innovation. An unequalled experience in hydraulic drilling technique is now applied to the hydraulic drifters.
|
|
Pantofore, manually operated drilling jumbos
Robodrill manufactures on request new Pantofore Jumbos.These Jumbos integrate following :
- Standard available carriers or special design
- BUC universal drilling booms
- MONTABERT drills, feeds and regulation system
- Manual or Semi Automatic drilling controls.
|
|
Robofore, fully computerized drilling jumbos
Robodrill manufactures on request new multiple boom Robofore Jumbos.Our Robofore integrates following :
- CAT 980F Carrier (Alt. : Carrier - Heavy Construction Type Wheel Loader)
- BUPEC robotic drilling booms
- HC107 MONTABERT drills
- MONTABERT feed and drilling regulation system
- MONTABERT computerized drilling system.
|
|
|
|
|
|
Rock Drilling Jumbo Introduction
Among the development and research of the products, Sunward Intelligent independently researches and develops the key technologies of the control system, hydraulic control system and special mechanism of hydraulic rock drilling jumbo, which reaches the advanced level in the world. As the latest product in China, it has been included in the National Construction Machinery “15” Development Direction List. In the past, China relied on imports totally for this product, and this project effectively breaks the situation that the imported products dominate the market in the field, meanwhile it is of great significance to promote national development of large-scale construction machinery and improve technical tunnel excavation of China.
Rock Drilling JumboFeatures
·Telescopiform structure and lifting operator's cab. Ample space for loader to pass for discharging that minimize additional workload.
·High positioning accuracy, high drilling speed(up to 1.5-1.8m/min). less drilling bit wear.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
Micropiles - Anchors - Jet Grouting
Micropile crawler mounted rigs allowing the execution of small holes and various technologies.
Base unit versions:
- crawler
- skid
- wheels
- decauville
- trucks
Hydraulic equipment for the execution of:
- injection
- tie-backs
- micropiles
- soil investigation corings
- jet grouting
- anchors
Drilling systems:
- down the hole hammer
- top hammer
- air/air + water
- with casing
- continuous flight auger
- jet grouting
|
|
Type VB 300
Universally applicable, the VB 300 fully hydraulic vertical drilling rig has provided reliable service in dry and mud drilling applications, specifically in air-lift operations.
With this rig boreholes with a depth of 300 m can be realized, which to say, that all parameters are non-binding guidelines for normal drilling conditions.
A two-axled vehicle, which delivers drive energy for drilling components with help of an extra drive, is its basis.
Accessories:
Pipe rotary device with max. diameter 419 mm, cable drilling unit, winch, flush head, centrifugal pump, high-pressure piston pump, compressor, generator, welding generator
|
|
Type VB 200
Easy to operate, the VB 200 vertical drilling rig is excellently suited to put down cased pipes for dry-drilled holes as well as mud drilling and coring.
The rig can be equipped with caterpillar chassis, too. Alternatively, the drilling unit can be installed on a small truck, typically an UNIMOG.
Accessories:
Pipe rotary device with max. diameter 324 mm, cable drilling unit, winch, complete flushing system, mast extension, generator, welding generator
|
|
|
|
